great video, I had to laugh at the start, 38 meter pump, 100 feet of hose, 150 m3 of concrete, 3 inch hose and temperature in Fahrenheit. Funny how we work and communicate in Canada, all over the place. Cheers
@@Goostradamus81 it’s hilarious, on one video I reference the metric system and the yanks bust my balls, so the next vid I go SAE and the entire rest of the globe wants to give me an ear full. Just can’t win with these construction types 😂😂😂
@@canadianconcretepumper1979 haha, sorry man, just made me laugh. The UA-cam world isn't as glamorous as everyone says it is. You do you man, great videos, cheers! From the lower mainland as well, now Islander
I like that video cuz it's your guys finishing it this time you guys pumping it and you guys are finishing it that was cool to see right on Scott take care
@@robertaustin-y7j I’ve been working with our finishing guys a good bit more as of recently. Truthfully, the finishing was always our break and butter, the pumping for years was just there to supplement on own finishing crews, and then around the late-90’s/early-2000’s sort took on a life of its own. I really enjoy being out with our guys.
This video gave me flashbacks. Used to work with a plant that had course sand and not many fines. They used a lot of the sand in the mix to. We eventually decided it was the sand. We looked at everything on the pump. Alliance even flew out to do a pour and monitor the pump. It was so random when it would do it. But the worst was always residential jobs pumping slow. Or lots of stoping and starting style pours. Anyway the eventual solution to a load like that was reverse 5 strokes at full volume. (With Alliance we couldn’t easily run the cylinders right to the end like a putz.) The idea being that broke everything loose in the end of the cylinders/S-tube and we could usually pump out at least 2 meters before it would act up again. Could at least get that load pumped off that way. Anyway I’ve never heard of anybody outside of the Lloydminster Alberta/Sask area have this issue.
@@nolanu2393 we’ve seen it periodically over the past of couple of years since supply chain issues have meant us seeing sand from alternate sources. Definitely does some funny things.
This is an employee who operates a pump in Korea. When starting work, is there a high risk of concrete clogging if you set up the 1st, 2nd, and 3rd stage booms and start with the 4th and 5th stage booms gently bent at an angle of about 30 degrees from the horizontal? If the boom falls at a steep incline, there is no problem with starting, but if two or more booms form a gentle angle, this seems to be a major cause of starting failure.
@@FIL_to_the_MOON Really lots of variables to consider here. The way you mentioned is undoubtedly the highest rate of success in getting it through. With our materials, priming this particular machine in Z-formation has a very high rate of success. We also find some benefit in priming through in a Z-formation (less potential for trapped air in the boom when stretching out and commencing pumping after the prime. For a newer operator or an operator lining a harsh mix, I would reckoned A-frame. For 95% of what we do, Z-prime has its benefits.great comment, and a great discussion topic. Appreciate you watching 🙏
@@canadianconcretepumper1979 I posted detailed photos and explanations of the difficult situation I am currently in on the community of my UA-cam channel. I am an operator of 9 years, but I am suffering from a blockage accident at the start to the point where I am thinking about quitting my job. Please give me advice. Thank you. Thank you
The Liebherr pumps would work slick for this setup with their outriggers. The petro can hydrex extreme is a premium all season oil expensive but our tigercat equipment usage chart gives it the widest temp range of any hyd oils available in north america.
@@banffdigger Agreed, the XXT outriggers would open up so many options in terms of setup. Good info with regards to the oil. We’ll be looking into this further 👍🏼👍🏼👍🏼
Try a friction modifier for your hydraulic oil. Reduces “slap stick”. Have had the same issue on my new pump after about a year of ownership. Your local pump dealer will have it in stock it’s a caterpillar product I believe
@@nathankrcelich8444 I meant to right “slip stick”. Rod-seal stick-slip in hydraulic cylinders is a stop-start motion that can produce vibration, and noise.
Looked like a gravy mix when you had the line hooked up! Nice solid stream, and good arc! Do you guys move the air cuff often to prevent the stubby 5’ from getting soft in one spot?
@@derkaderka5910 so weird that we didn’t see any issues pumping the mix until Alana’s precisely the moment we transitioned to pinning straight of of the boom. My suspicion is that a load or two may have been slightly off. Great question about the air cuff. So what we have found with the newer style fabric cuff from ConForms is that it does not create soft spots in the hose like the old hard-shell style cuffs did. Those older ones we had to be diligent in but always having the cuff pinching the exact same place on the hose pour after pour. The new ones, when used with a quality hose, we typically see the metal end wear through before the cuff ever causes issue with the rubber.
@@canadianconcretepumper1979 the fabric cuff is the way to go. It would be nice if they had more wear resistant attachment points though. We had one fabric loop tear off, and the second one is on its way out too. It’s seen a lot of use, but still life left in it, so I think it’s getting carriage bolts and eye nuts for new attachment points
@@derkaderka5910 So we’ve had that exact same issue with ours. What we ended up doing was just loop the hanging straps around/through the cuff, which has actually worked out pretty well (something perhaps I’ll cover in an upcoming video). Overall, SOOOOO much nicer than the old, hard-shell style cuffs for sure!
We do. Placing finishing is actually how we started out decades ago, and is really still our bread and butter today. The pumping, for many years was just there to service our own placing, but spawned into a whole other beast of its own in and around the early 2000’s.
@@Will-ll4gv Yes sir, I’ve listed a good bunch of videos pouring with our guys. This commercial/industrial type work we don’t do a ton of. Residential patios /sidewalks/radiant heat topping floors/architectural walls and stairs is more our bread ‘N butter.
the groaning noise may also be the holding valves, if they are counterbalance "cartridge" valves they can back off sometimes, and cause a groan or squeal my bucket truck had a holding valve do this, it started as a groan, then a squeal (really, really loud squeal), then eventually the boom would randomly freefall 10-15 feet, tightened the valves back up and no issues since
@@WoodCutr1 Food info to know for sure. Apparently this groaning is common to lifting cylinders from this era of Putz machine. From what I had heard, a change in hydraulic oil type and/or additive has been know to cure the noise.
@@canadianconcretepumper1979 thats what makes me thing holding valves, on mine the issue was the valve opening and closing thousands of times a second, "chattering" if you will, but only with warm thin fluid but, if the boom operates and the inspector is able to pass is, I wouldn't worry about it now, been how many years and its just a little sound?
The fabric cuffs don’t seem to cause any problems with a good quality hose, however the older style cuffs with a hard outer shell will cause soft spots over time
@@TheQuantumFire the old hard-shell style cuffs would kill a hose in a matter of months. The newer, fabric cuffs I have worn through the metal coupling end of the hose before the hose itself ever succumbed to the effects of the cuff. That being said, it is still critical to not run the air pressure any higher than needed to stop the flow of concrete. Also, engaging the pump before the cuff has released and the hose has fully opened WILL kill the hose in a hurry. Just a little bit of basic diligence and they’re less detrimental to the hose than kinking it off and throwing the old-school rope around it.
@@williamhunter-d1i I’m assuming the walls would be, yes. Not certain exactly how thick though. That’s one thing we’ve never actually done is a slip-form pour for something like these.
@@jasondaddo3483 99% of the flat-work we place with our own guys is residential (2” and 2.5” hose, which we typically just jump over our knee when pouring). We pump a ton through 3” and larger for our commercial placers, but they always supply their own apparatus for managing the hose. We used tried supply said device for them, but they would constantly get lost/broken. 3” lay-down line is an anomaly for us on the placing/finishing end of things.
@@danielcotton-pm6tw it’s becoming more common these days to see contractors with washout pans on site, but the majority of residential contractors prefer to pay the hour of pump time + $250 disposal fee for us to take it away, rather than dealing with the mess left on site. With the retarders and sugars available to us for killing the concrete, I actually prefer taking it away to washout at the ready mix plant where they’ve got the nice big water hose etc…
@@austinpalmlund5054 Same as you probably, much of the time we just splash the hopper with a touch of retarder prior to pumping down, pull a sponge (or not, if the job is only 5-10 minutes away) and roll dirty directly to the next job. Some much variation to each specific market. Always fascinating to hear how others do things.
@@canadianconcretepumper1979 fair enough 😭 hope u taught muddy feet what its like to have to actually control the pump into foundation walls. All they know down there is slabs
@@jackt833 sadly, we never did get out on a boom pump job together…. The schooling was definitely a little one sided (in the Texan’s favour) throughout the duration of this visit. 😁😁😁
@@canadianconcretepumper1979 love u man this channel has taught me so much… pls send the stickers to 788 oxford st w london ontario n6h 1v2. 😭😭❤️❤️❤️❤️❤️
SO THEY WONT ALLOW YOU TO PUMP MORE OR YOU CANT GET MORE THEN 20 YRDS AN HOUR THAT ABSOLUTELY SUCKS. WHEN WE WERE POURING THEY SET UP 3 TRUCKS EVERY 20-30 MINUTES AND AFTER THEY EMPTY ONE THEY WOULD BRING IN THE THIRD TRUCK THAT WAS WAITING SO WE ALWAYS HAD TWO TRUCKS AT THE TRUCK PUMP PUMPING
@@fredyounger5850 that’s what was ordered by the contractor here. There was some uncertainty as to whether or not we would be able to get two mixers at a time to the hopper, and if we did not, it’s a long run/changeout time between trucks, so they ordered on the safe side of things (which I agree with). Honestly though, these days it’s tough to get much more than that on a pour of this relatively small size (by commercial standards at least).
@@derkaderka5910 100% agree. Nothing worse than waiting in mud for 45-an hour and then having 3-4 trucks show up all at the same time. To the ready mix suppliers defence, constant traffic issues in our area make a consistent supply extremely difficult during peak traffic hours.
In New Hampshire when light weight came out we had to pull five inch around all day the same with light weight know a days they use 4 inch line or 1 1/2
@@jamessomero3617 we recently pumped a new “experimental” lightweight residential topping floor mix which required 4” line, and was still a battle to get through even at that. I don’t personally see it catching on given that most every other resi topping mix we’ve seen in our market over the past 25 years has pumped all day long no problem through 2” hose. I’m honestly surprised that the rental placing/finishing crew didn’t just walk off site that day. We’re just spoiled with our mixes out here.
@@randallbernard2074 Even better, we finally got it fired up and it died after about 10 seconds of idling. Pulled on it 50 more times trying to get it re-started… before realizing we had the gas turned to off.😂😂😂
@@williamhunter-d1i It certainly did feel like it, which is quite fitting because the full-time staff at this facility are strong union. We ourselves are not, there’s really only one pumping/placing/finishing outfit in town whom is.
@@robertaustin-y7j So the only unionized placing/finishing crew in town is Gastaldo Concrete (they have their own pumps as well). There’s also one local ready mix outfit which is unionized and runs a fleet of their own pumps. It’s interesting, in the past 10-15 years a good few of the ready mix outfits have unionized. Pumping, on the other hand, has not followed that same trend. I’m indifferent to either. They both have their pros and cons.
@@tomtammybates1512 that’s what I was thinking at one point during the issue, but she settled right down after those 1-2 loads. We’ve done a dozen pours with this machine since and have not seen the issue resurface.
@@canadianconcretepumper1979 I would definitely keep and eye on one of those proxy switches anyway. My 2020 was doing the same thing after a year of operation. It would be super hit or miss but I finally checked the lights on the switches. Not saying it’s the mix or the switch, but definitely something to take precaution with.
@@DangleMan27 it has recently been hanging up more than usual in the correction stroke. Deformed going to dig into this further.its just so strange that pressure would only hit around 55bar when it would hang up on the changeover 🤔🤔🤔
That first truck looks like it had a perfect slump. Must be a good mixer driver!
@@ianternowski4966 Driver definitely nailed on his second attempt! 😂😂😂
great video, I had to laugh at the start, 38 meter pump, 100 feet of hose, 150 m3 of concrete, 3 inch hose and temperature in Fahrenheit. Funny how we work and communicate in Canada, all over the place. Cheers
@@Goostradamus81 it’s hilarious, on one video I reference the metric system and the yanks bust my balls, so the next vid I go SAE and the entire rest of the globe wants to give me an ear full. Just can’t win with these construction types 😂😂😂
@@canadianconcretepumper1979 haha, sorry man, just made me laugh. The UA-cam world isn't as glamorous as everyone says it is. You do you man, great videos, cheers! From the lower mainland as well, now Islander
I like that video cuz it's your guys finishing it this time you guys pumping it and you guys are finishing it that was cool to see right on Scott take care
@@robertaustin-y7j I’ve been working with our finishing guys a good bit more as of recently. Truthfully, the finishing was always our break and butter, the pumping for years was just there to supplement on own finishing crews, and then around the late-90’s/early-2000’s sort took on a life of its own. I really enjoy being out with our guys.
This video gave me flashbacks. Used to work with a plant that had course sand and not many fines. They used a lot of the sand in the mix to. We eventually decided it was the sand. We looked at everything on the pump. Alliance even flew out to do a pour and monitor the pump. It was so random when it would do it. But the worst was always residential jobs pumping slow. Or lots of stoping and starting style pours.
Anyway the eventual solution to a load like that was reverse 5 strokes at full volume. (With Alliance we couldn’t easily run the cylinders right to the end like a putz.) The idea being that broke everything loose in the end of the cylinders/S-tube and we could usually pump out at least 2 meters before it would act up again. Could at least get that load pumped off that way.
Anyway I’ve never heard of anybody outside of the Lloydminster Alberta/Sask area have this issue.
@@nolanu2393 we’ve seen it periodically over the past of couple of years since supply chain issues have meant us seeing sand from alternate sources. Definitely does some funny things.
That’s the problem we have with one of the local plants in SE SD , especially when the contractor demands a 2.5” slump
This is an employee who operates a pump in Korea. When starting work, is there a high risk of concrete clogging if you set up the 1st, 2nd, and 3rd stage booms and start with the 4th and 5th stage booms gently bent at an angle of about 30 degrees from the horizontal?
If the boom falls at a steep incline, there is no problem with starting, but if two or more booms form a gentle angle, this seems to be a major cause of starting failure.
@@FIL_to_the_MOON Really lots of variables to consider here. The way you mentioned is undoubtedly the highest rate of success in getting it through. With our materials, priming this particular machine in Z-formation has a very high rate of success. We also find some benefit in priming through in a Z-formation (less potential for trapped air in the boom when stretching out and commencing pumping after the prime.
For a newer operator or an operator lining a harsh mix, I would reckoned A-frame. For 95% of what we do, Z-prime has its benefits.great comment, and a great discussion topic.
Appreciate you watching 🙏
@@canadianconcretepumper1979 I posted detailed photos and explanations of the difficult situation I am currently in on the community of my UA-cam channel. I am an operator of 9 years, but I am suffering from a blockage accident at the start to the point where I am thinking about quitting my job. Please give me advice. Thank you. Thank you
Love your video’s
@@jamessomero3617 always appreciate to watching and commenting James. You’re one of the O.G. followers of the channel 🙏🙏🙏
The Liebherr pumps would work slick for this setup with their outriggers. The petro can hydrex extreme is a premium all season oil expensive but our tigercat equipment usage chart gives it the widest temp range of any hyd oils available in north america.
@@banffdigger Agreed, the XXT outriggers would open up so many options in terms of setup. Good info with regards to the oil. We’ll be looking into this further 👍🏼👍🏼👍🏼
Great vid, fascinating… Ain’t no boring house floor pour from Texas….😂😂😂😂
@@BZ1340 “it’s showtime ladies!!!” Just on its own is more than sufficient enough reason for me to tune in each and every Sunday morning! 😁😁😁
You hoser! LOL😊
@@ssweeps Felt good to drag that 3” around for a couple of ours. In summary: I’m highly appreciative that I don’t have to do it every day 😂😂😂
Very interesting thanks
@@milesboehmer9969 Gald you enjoyed . Appreciate you watching and commenting 👊👊👊
Try a friction modifier for your hydraulic oil. Reduces “slap stick”. Have had the same issue on my new pump after about a year of ownership. Your local pump dealer will have it in stock it’s a caterpillar product I believe
@@MattBoylan-f6r Most excellent! I am going to look into this. Much appreciate the help 🙏
What do you mean by “slap stick”?
@@nathankrcelich8444 I meant to right “slip stick”. Rod-seal stick-slip in hydraulic cylinders is a stop-start motion that can produce vibration, and noise.
Looked like a gravy mix when you had the line hooked up! Nice solid stream, and good arc! Do you guys move the air cuff often to prevent the stubby 5’ from getting soft in one spot?
@@derkaderka5910 so weird that we didn’t see any issues pumping the mix until Alana’s precisely the moment we transitioned to pinning straight of of the boom. My suspicion is that a load or two may have been slightly off.
Great question about the air cuff. So what we have found with the newer style fabric cuff from ConForms is that it does not create soft spots in the hose like the old hard-shell style cuffs did. Those older ones we had to be diligent in but always having the cuff pinching the exact same place on the hose pour after pour. The new ones, when used with a quality hose, we typically see the metal end wear through before the cuff ever causes issue with the rubber.
@@canadianconcretepumper1979 the fabric cuff is the way to go. It would be nice if they had more wear resistant attachment points though. We had one fabric loop tear off, and the second one is on its way out too. It’s seen a lot of use, but still life left in it, so I think it’s getting carriage bolts and eye nuts for new attachment points
@@derkaderka5910 So we’ve had that exact same issue with ours. What we ended up doing was just loop the hanging straps around/through the cuff, which has actually worked out pretty well (something perhaps I’ll cover in an upcoming video).
Overall, SOOOOO much nicer than the old, hard-shell style cuffs for sure!
@@canadianconcretepumper1979 that’s good idea! Thanks for sharing!
Nice job...bro😊
Scott do you guys place and finish also?
We do. Placing finishing is actually how we started out decades ago, and is really still our bread and butter today. The pumping, for many years was just there to service our own placing, but spawned into a whole other beast of its own in and around the early 2000’s.
Never liked the Pete cab, the auto, the 38-5, or 3" gear lol..but I'm here. Gotta get paid, brother, thats all that matters
@@greghughey9738 lol!!! I love all mentioned, except for the poor visibility out of the Pete cab, and the 3” line…. only because it ain’t 2” 😂😂😂
@canadianconcretepumper1979 i knew you were sick lmfao 🤣
Are those finishers part of your company?
@@Will-ll4gv Yes sir, I’ve listed a good bunch of videos pouring with our guys. This commercial/industrial type work we don’t do a ton of. Residential patios /sidewalks/radiant heat topping floors/architectural walls and stairs is more our bread ‘N butter.
This exactly the business I am doing in Nigeria
So excited
I hope it lived up to the hype!!!
6 inch hose today? 😊
@@ssweeps May as well have been 😂😂😂
the groaning noise may also be the holding valves, if they are counterbalance "cartridge" valves they can back off sometimes, and cause a groan or squeal
my bucket truck had a holding valve do this, it started as a groan, then a squeal (really, really loud squeal), then eventually the boom would randomly freefall 10-15 feet, tightened the valves back up and no issues since
@@WoodCutr1 Food info to know for sure. Apparently this groaning is common to lifting cylinders from this era of Putz machine. From what I had heard, a change in hydraulic oil type and/or additive has been know to cure the noise.
@@canadianconcretepumper1979 thats what makes me thing holding valves, on mine the issue was the valve opening and closing thousands of times a second, "chattering" if you will, but only with warm thin fluid
but, if the boom operates and the inspector is able to pass is, I wouldn't worry about it now, been how many years and its just a little sound?
If this is Canadian. He’s not really Canadian because we use Celsius not Fahrenheit.
does using the aircuff damage the hoses?
The fabric cuffs don’t seem to cause any problems with a good quality hose, however the older style cuffs with a hard outer shell will cause soft spots over time
@@TheQuantumFire the old hard-shell style cuffs would kill a hose in a matter of months. The newer, fabric cuffs I have worn through the metal coupling end of the hose before the hose itself ever succumbed to the effects of the cuff. That being said, it is still critical to not run the air pressure any higher than needed to stop the flow of concrete. Also, engaging the pump before the cuff has released and the hose has fully opened WILL kill the hose in a hurry. Just a little bit of basic diligence and they’re less detrimental to the hose than kinking it off and throwing the old-school rope around it.
are the silos solid concrete?
@@williamhunter-d1i I’m assuming the walls would be, yes. Not certain exactly how thick though. That’s one thing we’ve never actually done is a slip-form pour for something like these.
Can you help me. I need pump opertor job. I have experience in this job.
OK YEA I WAS WONDERING IF YOU JUST COULDN'T GET THE CONCRETE OR HAD ROOM FOR TO MIXER TRUCKS IN THAT SPACE
Where is this in the vancouver area?
@@ThePorkchop81 This is out at Richardson Grain Terminal in North Vancouver.
You don’t have a hook and ring for long rubber work?
@@jasondaddo3483 99% of the flat-work we place with our own guys is residential (2” and 2.5” hose, which we typically just jump over our knee when pouring). We pump a ton through 3” and larger for our commercial placers, but they always supply their own apparatus for managing the hose. We used tried supply said device for them, but they would constantly get lost/broken.
3” lay-down line is an anomaly for us on the placing/finishing end of things.
its wild to me that you guys travel without washing out.
@@danielcotton-pm6tw it’s becoming more common these days to see contractors with washout pans on site, but the majority of residential contractors prefer to pay the hour of pump time + $250 disposal fee for us to take it away, rather than dealing with the mess left on site.
With the retarders and sugars available to us for killing the concrete, I actually prefer taking it away to washout at the ready mix plant where they’ve got the nice big water hose etc…
You wash out at every job? That’s crazy to me
@@austinpalmlund5054 Same as you probably, much of the time we just splash the hopper with a touch of retarder prior to pumping down, pull a sponge (or not, if the job is only 5-10 minutes away) and roll dirty directly to the next job.
Some much variation to each specific market. Always fascinating to hear how others do things.
Brother we are CANADIAN!!!! Why you saying the temp in degrees!?!??!?
@@jackt833 my buddy from Texas was visiting the next few days after this pour. I was simply practicing up to make him feel warm and welcome 😂
@@canadianconcretepumper1979 fair enough 😭 hope u taught muddy feet what its like to have to actually control the pump into foundation walls. All they know down there is slabs
@@jackt833 sadly, we never did get out on a boom pump job together…. The schooling was definitely a little one sided (in the Texan’s favour) throughout the duration of this visit. 😁😁😁
@@canadianconcretepumper1979 love u man this channel has taught me so much… pls send the stickers to 788 oxford st w london ontario n6h 1v2. 😭😭❤️❤️❤️❤️❤️
SO THEY WONT ALLOW YOU TO PUMP MORE OR YOU CANT GET MORE THEN 20 YRDS AN HOUR THAT ABSOLUTELY SUCKS. WHEN WE WERE POURING THEY SET UP 3 TRUCKS EVERY 20-30 MINUTES AND AFTER THEY EMPTY ONE THEY WOULD BRING IN THE THIRD TRUCK THAT WAS WAITING SO WE ALWAYS HAD TWO TRUCKS AT THE TRUCK PUMP PUMPING
@@fredyounger5850 that’s what was ordered by the contractor here. There was some uncertainty as to whether or not we would be able to get two mixers at a time to the hopper, and if we did not, it’s a long run/changeout time between trucks, so they ordered on the safe side of things (which I agree with). Honestly though, these days it’s tough to get much more than that on a pour of this relatively small size (by commercial standards at least).
Knowing the actual truck spacing is way better than random spacing rodeo. At least a guy can plan ahead for circulating if needed
@@derkaderka5910 100% agree. Nothing worse than waiting in mud for 45-an hour and then having 3-4 trucks show up all at the same time. To the ready mix suppliers defence, constant traffic issues in our area make a consistent supply extremely difficult during peak traffic hours.
Should be five line
@@jamessomero3617BOOOOOOO!!!! We
don’t speak of such cruel and inhumane things around here James 😂😂😂
In New Hampshire when light weight came out we had to pull five inch around all day the same with light weight know a days they use 4 inch line or 1 1/2
@@jamessomero3617 we recently pumped a new “experimental” lightweight residential topping floor mix which required 4” line, and was still a battle to get through even at that. I don’t personally see it catching on given that most every other resi topping mix we’ve seen in our market over the past 25 years has pumped all day long no problem through 2” hose. I’m honestly surprised that the rental placing/finishing crew didn’t just walk off site that day.
We’re just spoiled with our mixes out here.
Can you add some rap music into your videos
@@6Diego1Diego9 I’ll see what I can dig up. The selections available through UA-cam are quite limited (I don’t believe Eazy-E is on their playlist) 😂
To much fines fck that 3inch off to its backing up in the lines or cylinders
@@MatthewLicciardello the funny thing is, it didn’t start doing it until we were out of the lay down system and pumping out of the boom.
@@MatthewLicciardello 3” line is the “big” hose for most of what we do. Not uncommon to have this rig plugged into a couple hundred of 2”/2.5” 😂
Mm concretes like a woman sometimes good sometimes maybe shit Hahar
Hummmm. It ante got no gas in it!!!
@@randallbernard2074 Even better, we finally got it fired up and it died after about 10 seconds of idling. Pulled on it 50 more times trying to get it re-started… before realizing we had the gas turned to off.😂😂😂
looks like union work, lol
@@williamhunter-d1i It certainly did feel like it, which is quite fitting because the full-time staff at this facility are strong union. We ourselves are not, there’s really only one pumping/placing/finishing outfit in town whom is.
Who is it@@canadianconcretepumper1979
@@robertaustin-y7j So the only unionized placing/finishing crew in town is Gastaldo Concrete (they have their own pumps as well). There’s also one local ready mix outfit which is unionized and runs a fleet of their own pumps.
It’s interesting, in the past 10-15 years a good few of the ready mix outfits have unionized. Pumping, on the other hand, has not followed that same trend.
I’m indifferent to either. They both have their pros and cons.
Prox. switch ?
@@tomtammybates1512 that’s what I was thinking at one point during the issue, but she settled right down after those 1-2 loads. We’ve done a dozen pours with this machine since and have not seen the issue resurface.
@@canadianconcretepumper1979 I would definitely keep and eye on one of those proxy switches anyway. My 2020 was doing the same thing after a year of operation. It would be super hit or miss but I finally checked the lights on the switches. Not saying it’s the mix or the switch, but definitely something to take precaution with.
@@DangleMan27 it has recently been hanging up more than usual in the correction stroke. Deformed going to dig into this further.its just so strange that pressure would only hit around 55bar when it would hang up on the changeover 🤔🤔🤔