Double your chances of catching fish
Вставка
- Опубліковано 20 сер 2024
- On TaDays video we are making a DIY that will surely increase your catch rate . if you like DIYs then don't forget to subscribe because I've got alot of them and post new ones every week
if your interested in purchasing a xtool laser with a discount and help the channel click the link below
affiliates.xto...
FOR ALL PRODUCTS UDE IN VIDEOS ,,,,,,,,CLICK LINK BELOW
www.amazon.com...
For Fishin N Stuff Gear visit the Link below
HATS
DECALS
SHIRTS
www.etsy.com/s...
To save 20% off of any ,,,,,,,,,,,,Hybridlights,,,,,,,,,
Go to
hybridlight.co...
enter code below
FishinNstuff
Thanks for watching dont forget to subscribe and click the bell for notifications
For 10% off of Katfish Clothing click on the link below
www.katfishclothing.com/?ref=Fishinput
Enter Code. FISHNSTUFF at checkout for 10% off all purchases - Спорт
All you need to do to stop the acrylics from breakage is to use the smallest drill bit you have and step it up a few times till you get to the size you want to end up with. Also a bar of soap on the bit can help a lot.
You make making this stuff look so easy! Love your builds! Love your channel! Keep these builds coming!!
On soft material like Fiberglass,Plexiglass,Acrylic,etc. I always use brad point bits.They were designed for woodworking but work great on the others too.The Harbor Freight ones work the best (there's some other brands too) because they're shaped (for a lack of a better word in my knowledge base...lol) "skirt" to cut/score the outside diameter 1st before the bit itself starts to remove the material from center.This gives you a lot less to zero chipout.
They can't be as easily sharpened as a regular brad point like some other brands because of that outside "skirt".
Epoxy does bond well to wood as it is...but there is another way to make the slot for the acrylic.Use a dovetail router bit.With the V taper the dovetail bit makes that epoxy and acrylic with a couple holes and it will never work lose and fall out.
That's some great information right there I really do appreciate it
@@FishinNStuff Just passing on some things I learned over 50 yrs...haha
Hey keith! , I just wanna say that evertime I take my son out catfishing and his friends they are amazed at what all I've made to fish with . Thanks to you.. everything from dragging weights to planer boards to led nite lites.. of course I take the credit.. lol.. but I know i owe it to you... lol.. great channel brother .. you the man!!.. tight lines brother from Burlington nc...🙂😃
If you made the stuff then the credit is yours . I really appreciate you watching Sir . I'm glad your teaching your son to enjoy the outdoors
Bo them thangs turned out awesome. I learned a long time ago from an Old Timer to put duct tape (I use that crap on everything) on plexiglass to drill holes in it. Man I need a set of those boards bad. Can't wait until the next build.
Thank you I'll try that
When cutting the balssa wood after the first center cut turn the pice 180° end for end and your cut will be perfectly centered
That's a great tip that makes so much sense . Thank you very much
Nex time etch the acrylic with the paper on. That is AWESOME!
I tried it that way and with soap on it . I liked the steel method the best
Bro I am from Texas and have a country accent but I find myself captivated by ur voice and accent. Love the tips and helpful guides thank you and keep it up . 👍
Lol thank you brother I appreciate that . Country folks are all related that's why lol
Your UA-cam award looks great on your toolbox......Well Deserved..
Ol thank you Sir I appreciate that , understand it's not a bragging thing . I want to share it , because you guys are the reason I got it
Hey Keith you can also run the drill in reverse and it will help it from cracking as well that trick works well on all plastics as well .
This planer board needs led lights for night fishing! Come on what YOU waiting for!
Good one Keith, with the prices on
everything skyrocketing your videos
on everything fishing are being watched more and more!!!
Those things work so good I had to stop the video and wind in a 10 pound blue cat.
Great video,we always used a small split shot for a bobber stop.adjustable and always have them.
We always used balsa wood for making radio controlled airplanes because its light and strong.
Loved the video as always. You may have already tried them, but they do make drill bits just for acrylic.
Ima hafta get me some . Thank you brother
Better yet, you can make your own! Drilling into acrylic is best with a dull pointed bit. Not quite flat, but close. I save all my worn out bits for drilling into plexi/acrylic - they work awesome! 😎
A brad point bit might be better as it cuts differently once the brad point is fully in, more flat against the surface and less wedging which along with the heat from friction causes the acrylic to crack or break.
something i would do when drilling on plastics is drill in reverse. this way it more melts the hole than cuts it and it wont break because the bit wont grab. im not sure how effective it will be for this but it might be something you might want to try
Hey Keiff, Fricken Awesome man. Great job like always. FYI: Here is an idea. I don't know about plastics but I used to drill holes in glass. I would use putty, roll it out like a rope, make a little donut around the spot to be drilled, put turpentine into the middle of the donut. This will keep the area cool and lubed so you can drill it. You might also use a glass drill bit. Can't wait for your next video. Keep up the good work. Thanks...
That's a great idea . I wonder it it would damage the acrylic?
Hey brother , have you ever thought about spray painting the top of them bad boy with glow in the dark paint. That way you can start fishing at the daytime and keep fishing at night. If you put enough coats of the glow in the dark paint you might be able to get a few hours out of it.
That might would work , like good 👍
I used to use a small tip soldering iron to put holes in acrylic.
That's a really good idea 💡I've made holes in plastic by heating a nail
If you put a piece of tape on both sides & drill through the tape,it won't crack!
One thing you could try is running your drill bit in reverse and then drill out the hole. It works with fiberglass and keeps it from chipping and cracking.
Now THATS AWESOME 👌 👏 👍
A Tile wet saw can cut Acrylic without cracking or Chipping
Why are these videos so entertaining lol
I don't know lol
The planer board. tour out awesome!
that was a sweet board keith looks great man keep up the good work
Great job, Keith! Those boards look ...... awesome! 😅 So I'm thinking I need to hit the lottery to have all the shop toys -- and the shop space! Loved the video, thanks! 😊
You can do the samething with the 5 dollar sandblasted I made on the video I etched my windshield on
All your builds are AWESOME! :) love watching them👍
Thank you very much
Please set an alarm to chime a year from now to remind you to make a Follow-Up Video to tell us how these performed/survived? I'm kinda skeptical that the acrylic will break around those drilled holes where the threaded rod and swivel snap are attached. They look nice!
Yes Sir. If they perform any where at good as the aluminum boards they'll be great
Keith them are some awesome looking boards you might have something going for you 😉 Great video
Hello nice to see a new fishing hack video I enjoy seeing your videos happy fishing wendsday 💛🎣💪🏼👍🏼
So much talent inside one person. Not fair to us average people.
I thought you were an ALPHA man 🤔
Iv never used a plainer board before but it has to be said the do look pretty
Awsome
A wee led light and it will light up pretty cool
Just saying
👍👍👍😜🏴🦕🦄😁✌🤞
Nice looking planer board. The etching is awesome!
One thing, when drilling acrylic, why not use water as a lubricant? I think it would keep the plastic from melting on the drill bit and seizing/tearing out.
I bet your right . The dermal worked great . But I just happened to buy it for my wife a couple weeks ago luckily . It's pretty cool for 16 bucks and cordless too
Been watching you for awhile now. You got great stuff man. Love these boards. Would like to see them in action tho. See ya on the next build!
I've got access to a bunch of 1/4"Lexan scraps from work that will make AWESOME planner boards.
Yep
I gotta tip for you lol. Drill all the holes before you cut to size👌🏻
Great video Keith!
Those really are some great looking boards
What you waiting on I'm already subscriber!!. And hit the bell . Lol . great job on your video.thanks man.
Thank you Sir
I do believe that those are Awesome! Great video Keith!
Awesome man! Great stuff as usual and hello from your home state of North Carolina . Fish on bro!
Thank you Sir
I'm not an expert with that stuff but if I run my drill in reverse it melts a good hole without breaking it. I know pool noodles aren't as durable but that's what I used on mine. They are held in place by two zip ties and will be easy to change if the time comes. I've gotten two years out of em so far and they still look good. I don't leave them or my boat outside in the sun, I think that makes a difference.
I'll try that man thank you
Great job buddies. Drilling plexiglass is not fun, even if you were drilling in the middle, it could crack. Worked with it for years, and never found 100% sure fire way.
Anyway, looks good. Keep up great work.
Thank you Sir . Your right drilling it is sketchy lol
That is Awwwesome!
Looks good. I like that Etching machine
That laser is Awesome.
Man that video was “Awesome” 👍🏻
Good stuff Keith! Looks great! Keep it up!
On the back hole where you said you attached two swivels together or you could use a paperclip. Was wondering if you should reinforce the hole since is so close to the corner it might easily snap off. Maybe some kind of rubber grommet. I love the look of these but I am too chicken to use plexiglass and would probably use galvanized steel or aluminum. Not as likely to damage if you dropped one. Love the videos. Keep them coming.
Thank you Sir, I don't think it will snap off . You could move it inward a little too make it stronger . But all the pull is applied to the front clip really .
You give me inspiration 😜 cool deal !
Thank you
Would love to have one of them as a man cave sign they look great
They really do make cool signs
If you would have left the paper on that acrylic you could have done the etching on it just fine
Yes Sir your right . We tried it on the paper , with soap on it and on the steel and I liked the steel the best
Hey I say you need to put some of those on Etsy bet you make some big bucks on those catch you next time 👍
Outstanding board KIeith
I just looked at page didn't get video notifications had to click bell again.
That's how UA-cam does thank you for watching my friend
Good stuff man
I do believe snuggly is not a word
Lol
Hey Keiff used to work a lot with acrylic making aquariums etc. If you use regular drill bits then drill holes in reverse mode at half the speed. The acrylic will not stick to the drill bit and will not crack. When drilling at the edges if the acrylic is pretty thin put a small acrylic piece overlapping where you will be drilling. You can glue the acrylic using acetone ie nail polish remover. Love your channel.
That's good to know . I would have never thought of using acetone
Awesome hacking & build Buddy 🎣🤘. Would of been even nicer doing, a test run 👊. Tho you're neighbor doesn't like, you using there pool 😉. Us English people call it polycarbonate ie ( bullet glass) . Especially when you get it 1inch thick, cut it can be a problem tho. Go slow cutting, as it CAN shatter.
Lol I shoulda used the pool lol
They use that wood for r/c air craft also. You know, those fancy build from scratch that takes 11 years to build looks like the real deal crash it on the second flight 27,562 dollar r/c airplanes.
Yep I didn't even think about that , it's super light
Awesome vid... But never used it before! Maybe...jus maybe I'll have to watch ur vid on how to use it...lol
That's pretty dang cool right there. I'm gonna try it. Only I don't have a laser so it won't be as cool as yours.
I made a video about sandblasting plexiglass with a 5 dollar blaster I made . Also did my windshield on my boat
Hey friend how you doing, great ideas 👍stay connected friend 👍👍
Should've linked that dremel
Which one you want , I'll do it
Got 4 of em fabbed minus the balsa, ordered pool noodle. Im excited
And they turned out AWESOME
The pool noodle boards work great too
@@FishinNStuff used them tonight! They work awesome!
If ya use tile bits on your acrylic they won’t crack it
Totally awesome man
love it man as always
That type of acrylic is pretty brittle, hope it holds up.
I hope so
That laser is pretty awesome
Another great video. What about using a Tywrap (name brand with the metal locking clip and hard plastic, not one of the cheap knock offs) to attach instead of the metal clip?
Nice
@Fishin N Stuff you should sale some of them boards with your logo on them . Watcha weighting on. I will take two left and rights
I've hit some stickers you can put on yours lol . I'm kinda in love with the Aluminum boards I made . After I use these some we'll see how the do
Now THATS Just PURTY DANG AWESOME RIGHT THERE ,, Your Gonna Fool Around And Get Good At This If Ya Keep It Up lol 🤣🤣,,Just Kidding,, You Do A Good Job ,
AND,,,------->>>>>
I Got Two Green Submersible LED lights, And I'm Gonna DYI Two White Floating LEDs , That Should Be Sufficient I'd Think ,, It's Summertime Hot Outside Now And Heats Up Fast In The Morning , Soooo I'm Really Hopeful This Puts Me Back In Business During The Cooler Night Temps ,,We Shall Soon See
I find fishing is better at night when the temp gets really hot
can you use planer boards in rivers with a ton of current to get your bait further out to where you wouldn't normally get your bait out to from the shore? do a video about that.....
I've personally never tried it in a river . But ive used em upstream in a lake ( the river portion) and they worked fine . So I would think so
Dude love the content but it is so funny to watch the captions and it otocorect your words🤣
Lol
Should make a set of those and send them to Dieter. Just saying. Love the videos brother
Hey bro 😊 nice planerboards 👌 but I want to see them in use 😍
Awesome! That looks good bud.
AS ALWAYS GREAT STUFF! DO YOU HAVE ANY IDEAS FOR A PLANER BOARD MAST?
Ty
Hey BILLY I watched a video today I believe it was on TikTok where a gentleman took a piece of PVC about 2 inches in diameter cut about an inch thick and circles and then drill holes in the circles stuck a 3 inch screw through it put it up in the ceiling and hung is Rod Through it I know you’re fascinated with PVC pipe so you might want to check this out or do it yourself just follow my directions and it wasn’t my idea like I said I saw it on TikTok
That's cool man . I did a views sorta like that . I think it was 8 rod storage ideas
Look amazing when you doing a giveaway on some boards? Just messing around with you they awesome!
Another tip on drilling acrylic use a end mill to punch your holes at lower speed it will avoid cracking a chipping
That's awesome
hey bud, great video as usual. i wanna ask you if you could do a video or 2 on bank fishin for bass... that would be -awesome-
I'll try to do that
Dremel is a registered trademark. The tool you are using is a rotary tool. Otherwise, great video!
Yeah well you know what I meant . And it's ok I won't charge Dremal for mentioning them on my video haha
Really wish we could use more than 3 poles here and you have to get an additional license for the 3rd
Lol you think you need a license? Especially for a right. Hah
That stinks , we can only use 4 poles bank fishing . But as many as we want in a boat
you and me on Wylie. When can we make it happen?
That was Awesome !
I use road signs that have been run over
That's a really good idea 💡
Nice!
Thank you Sir. You did a really good job last week
THanks I was nervous being on panel with a coulpe big-timers @@FishinNStuff Keith how do you determine the placement fot the threaded rod?
@@BobcatOutdoors I like to quarter it which is 2 1/2" on a 10" board and keep it towards the top right under the floatation
awesome
You are the Boss you keep out doing yourself. What is your wife channel on UA-cam?
ua-cam.com/channels/VkTaMihXnTddhCu3OsFI9A.html
Thank you 😊
This hack was awesome 😎!
Fan-awesome-Tastaic
Nice i love jour hacks