Volvo SX Gear Oil Change
Вставка
- Опубліковано 28 сер 2024
- Here are the part numbers:
Gear oil - 75w-90 synthetic - 1141679, you need 2.2 quarts.
O-ring - 3855081 - you need 2 of these
O-ring - 3852045 - you need 1 of these
Other part numbers for the 4.3GXI-E that might be useful:
Oil filter - 3850559
Impeller - 21951348
Fuel filter - 3862228
Engine oil - SAE 10w-40 synthetic - 21681794 (quart); 21681795 (gallon) - you need 5 quarts
The best prices I have found is Marine Parts Source - www.marinepartssource.com. I'm not sponsored by them, but if they want to throw me a discount code that would be awesome.
Total cost to do the gear oil change is about $135. I order 3 quarts of gear oil, stuff is expensive.
One of the few or only videos that clearly shows how to do the maintenance without obnoxious intros etc
Thorough and clear explanation. I’ve watched this every year now. Thanks again !
Nice easy to follow video, thanks!
Helpful! Think I may tackle my own this year 🙌🏻
Naic video very very thanks sir 🙏❤
Where is the part number or part qr code for the pump lol
Thanks for making this video
What tool do I need to change prop for a Volvo pentra
Robin Roberts - for a dual prop they make a special tool since there are two different nuts. I did my buddies prop with some large pipe wrenches. My prop didn’t require a special tool.
How did you crack the lower flathead plug? Mine is wicked tight and I’m not sure the best way to approach it. Seems like the flathead design was a terrible choice.
I used the biggest flathead i could find. You could also put a wrench on the screwdriver and have someone lightly tap the handle of the screw driver while you’re turning.
I had the same problem. I luckily have a impact screw driver. When i hit with a hammer it jolts the screw lose.
I have a Volvo penta D3-140 engine. how many hours in one oil change? tq
I think it just depends. I know guys who put 200 hours a year on their engines and only change the oil once.
I do it once a year regardless of hours.
Why 2.25 qts ? Why not 2 or 2.5 ?
Just trying to be precise for those watching.
Great video any tips for getting the bottom screw off. Mine simply won't turn.
Which screw?
@@ninjapatton drain screw. Ordered a hand impact driver to try next.
@@brianmccoppin ah. Yes. That bottom one can get seized on. Soak it with penetrating oil then get an impact screw driver.
I used a big screw driver , put vice grips on it. Pressed in really hard and used the vice grips to turn the screw diver.
Why cant you just fill in the dip stick hole?
Paul McCown
1. Manual says to do it from ground up.
2. By going from the top, you could still have an air bubble or even a void in the lower gear case. By going from the ground up you ensure all parts are coated. Also, when filling from the top there is no way for the air to escape and will take forever.
Makes sense, Thanks for the video!
Does your hydrofoil help? Pros\Cons?
Daniel Somraty
It helped get me on plane faster but didn’t stop The porpising. So I added Nautilus SX trim tabs and they worked even better; so I pulled off the hydrofoil.
Can you not fill it from the hole under the cover instead of from the bottom?
You shouldn’t fill from the top. You fill from the bottom to ensure no air bubbles. Every lower unit I know of is filled from the bottom up.
I was going to ask the same question
Filled mine from the top, no drama
Crack loose the check plug
Can you add a link to the pump you got from Amazon?
www.amazon.com/Shoreline-Marine-Pump-Lower-Unit/dp/B004UOPZ9S/ref=sr_1_1?ie=UTF8&qid=1527080774&sr=8-1&keywords=lower+unit+gear+oil+pump
You can also buy this at walmart, academy or west marine
Bryan Head. I bought mine at Walmart for $8
Is there a gear oil reservoir?
wrxsti2fast25 nope.
@@ninjapatton do any of the Volvo penta have a reservoir? I got the 5.0 and I cant find it
@@wrxsti2fast25 - I really don't know. Try the forums at iboats and there are some really smart people there that might be able to help.
So that was 75 90?
Yep. Volvo Penta Gear Oil Synthetic... www.amazon.com/dp/B001VMCUKE?ref=ppx_pop_mob_ap_share
@@ninjapatton do you know if 75W90 synthetic gear oil from other manufactures is sufficient? Haven't done the maintenance yet, but I have some Valvoline synpower. Looks like the Valvoline stuff shows that it meets or exceeds the API GL5 called out in the engine manual.
Brent Radlinger - I know a lot of guys who will tell you as long as you use brand name oil you’re fine. I’m not an expert but intend to agree. My engine is starting to show it’s age so I use the Volvo stuff hoping it will give me some longevity. Go check out a site - www.bobistheoilguy.com/forums/ for some info that might help.
How much oil did you need ?
Juan Fernandez
2.2 quarts
@@lenmos1y be nice. The guy never said he was a pro like u..