You can use a passive antenna combiner and switch to a 2U rack. You can also switch your power cables to usb with myvolts ripcord. That way if you can’t find power you can also use usb battery banks to power both your receivers and mixer. If you have to pad your mics you should adjust your gain on the receiver.
Thank you bro. Those are all great ideas and we do have a way to accomplish it. We're stuck with the three rack version though because the MG06 and 2 mic transmitters doesn't really fit in the 2 rack version with the power conditioner and the 2 mic receivers. This rack is also dual a purpose and originally designed for live sound purposes with four mics. When I deal with bands I actually remove that power conditioner and put two more mics in the rack as it was originally designed. This PA system was actually a cool idea one day and I ran with it. I've also done some adjusting so that the power harness for the iPad and computer is more easily removable window switch between a full mic rack and the PA system configuration. Thanks for watching brother.
I could use the UA 221 for 2 receiver and only loose 3db per split. All of my systems are built to be modular and this particular one is originally a four mic rack. All of the original bNC and power cables are still there for 2 additional mics. There is a method to my madness.
how are you Mr i am from Ethiopia please well you help me please please i have qsc rmx 5050 power amplifier and Yamaha MG06X STEREO MIXER SO HOW CAN I Connect from power amp to yamaha mix please show me or send me the procedure please please
Hello my friend and thanks for watching. I would have to connect XLR out of the MG06X to XLR in channel 1 and channel 2 on RMX5050. Then Connect speaker or 1/4 TS out to the speakers accordingly. MG06X is set to mono so that both microphones 1 and 2 goes to both speakers through the amp. If the MG 06X is in stereo mode Mike one will go to the left speaker and mic tool go to the right speaker. That is the gist of my understanding for now.
I absolutely love your cable management Well Done Sir.
Thank you, Bret. Good success to you sir.
This is what I'm working with for my ceremony rig. Fast setups and breakdowns are a must!
Right on.
Hello I'm Deejay Cheeks Ccncp from Belgium, I've just saw your video where you build the PA system, you did a great job, big up bro & respect
Thanks DJ Cheeks Ccncp. Keep it rocking in Belgium.
Your attention to detail is insane. Much respect.
Thank you DayNNyteDJs. Great success to you all!!!
Super Clean Setup!!
Thanks DJ Francisco.
Nice little build
Thanks for watching my friend!!!
Thanks!
Thank you for the super thanks my friend.
You can use a passive antenna combiner and switch to a 2U rack. You can also switch your power cables to usb with myvolts ripcord. That way if you can’t find power you can also use usb battery banks to power both your receivers and mixer. If you have to pad your mics you should adjust your gain on the receiver.
Thank you bro. Those are all great ideas and we do have a way to accomplish it. We're stuck with the three rack version though because the MG06 and 2 mic transmitters doesn't really fit in the 2 rack version with the power conditioner and the 2 mic receivers. This rack is also dual a purpose and originally designed for live sound purposes with four mics.
When I deal with bands I actually remove that power conditioner and put two more mics in the rack as it was originally designed. This PA system was actually a cool idea one day and I ran with it. I've also done some adjusting so that the power harness for the iPad and computer is more easily removable window switch between a full mic rack and the PA system configuration. Thanks for watching brother.
Good stuff!
Word bro.
Thank you 🙏
Bought me 4U case and did a same configuration 👍🏻🥰
Word bro I can wait to see it!!! We're on Facebook also.
hello, why do you use UA844+SWB for 2 qlxd systems? U could use 2 items ua221
I could use the UA 221 for 2 receiver and only loose 3db per split. All of my systems are built to be modular and this particular one is originally a four mic rack. All of the original bNC and power cables are still there for 2 additional mics. There is a method to my madness.
What’s the program on the iPad are you using to get the wave forms
DJay Pro AI. I set it to auto mix to get that view but it's a full blown DJ program. Got it from the App Store.
What model is the power strip? Thanks
Monster Pro 900 but I think it's obsolete. If I had to replace it I'd select a Furman M8x2 amzn.to/3LHIL4l or Radial amzn.to/469z9aG.
how are you Mr i am from Ethiopia please well you help me please please i have qsc rmx 5050 power amplifier and Yamaha MG06X STEREO MIXER SO HOW CAN I Connect from power amp to yamaha mix please show me or send me the procedure please please
Hello my friend and thanks for watching. I would have to connect XLR out of the MG06X to XLR in channel 1 and channel 2 on RMX5050. Then Connect speaker or 1/4 TS out to the speakers accordingly. MG06X is set to mono so that both microphones 1 and 2 goes to both speakers through the amp. If the MG 06X is in stereo mode Mike one will go to the left speaker and mic tool go to the right speaker. That is the gist of my understanding for now.
Thanks!
Heggraphics, thank you very much for watching and the super thanks. Good success to you!!!