Nice video mate. One also plus with the GJ Tool is it not only picks the WXM but also the original profile Ultion U11, U12, U13 and U14 profiles as well as the Brisant D section. The other tool will only pick the WXM. So from a cost effective point of view I will leave it there 😉
Cheers bud 👍🏻🔑 I did say that the Nsuper only works with the WXM but I think your explanation is better 😂😂😂, another point is I think the lead time even if you order direct from them is about 2 week
Great comparison Seth, I use the nsuper and have had a lot of success but I'm investing in the GJ's version for the very reasons you've highlighted! Cheers mate!
Exactly mate, this is why the GJ tool beats thus, although the Nsuper is user friendly like you said it can’t be pulled out, also the one GJ tool covers all profiles from the earliest to the latest
No you definitely can’t bypass these, in fact most euro cylinders that are manufactured now can’t because they’ve done away with the weakness that lets us exploit them
First step is ask yourself why? Are you interested in the trade , as in you have to love locks/picking, everything about them, second is check out how much competition there is in your area, if there’s already a number of established locksmiths there you may struggle to get it off the ground, and third you must have money to invest in yourself….training, tools, vehicle and stock it all adds up quickly trust me 👍🏻🔑
Do you find loosing the tension screw to allow free movement between pins, or tighten so it clicks between pins? I'm finding setting the wire to line up with the pin tricky as not sure it's lining up properly.
I’ve loosened mine off completely so the wire makes no clicks between to allow free movement….my advice is don’t get over fixated on the lines, they are just a guide
@@marklovell9236 it might be that you’ve come across a particularly tough one, I’ve had a couple that I couldn’t open no matter what. And it doesn’t matter if it takes you 2 or 20 minutes an open is always a win in my eyes
@@FortressLocksmiths that made me feel better 😂, not so bad when you have it clamp in a vice but have you been defeated at a customers property with one of ultion range?if so How do you deal with it?
@@marklovell9236 I uploaded a video a few weeks back where I had forgot my Ultion kit and ended up having to drill it out, was very pissed off with myself
Eh up I have the n super and already have bought 2 and snapped wires ,not happy in the respect that you just can’t change the blades ,I am going to purchase the gj locks wxm one instead ,great videos👍
I came across your channel (here in Spain) in the first lock down. I've watched all your euro lock videos, we don't have many mortice locks here. I've really gotten into it as a hobby and have bought some multipick tools. I've got quite good at raking and hopefully will move on to spp. I buy second hand locks from the local Sunday market. I managed to rake my own front door but the first time I tried the tension tool fell out, hit me on the knee and went straight under the door. Luckily I had the key in my pocket. Sorry for the long comment, I won't make a habit of it. I just wanted to say thanks for the interesting,helpful, and really addictive videos.
That’s alright Kevin I don’t mind long winded comments as long as they aren’t to give me abuse! 😂 and don’t you worry I’ve got a lot more videos to upload, and I’ve seen a lot of locks in Spain some weird and wonderful stuff over there
Good stuff mate. I apsolutely love your site it's my favorite by far and love your personality its gold we would get on like a house on fire thick as theives lol i love the gj stuff i get some here and there i like the epg i have kronos but i would have liked a gj one but im not a licensed locksmiths but my father was and my grandfather was and i should have been. I love every part of it but when i was much younger and the information i new it got me into a little bit of trouble had a stay in one of her majesty hotels for quite a while. And when i grew up a bit in the head years later after been in and out of the nick. i have all the skills tools van etc. But i cant get my licence because of my police record even though i paid my debt to society its baggage and they wont play not in Australia anyway. It really dosnt worry me to much at all I've done it for many years now i do a lot in the shadows word of mouth pubs etc friends its more than enough for me
Another great review 👍 definitely a plus been able to remove the tool for plug spin. Been looking at some of GJs tools are they much cheaper direct with him than on other websites I've seen ect ? Got my training in a week or so getting nervous 🤣 but I feel I've learnt a lot from you mate already cheers 🤣
@@FortressLocksmiths finally invested in 1 as there are alot of HS locks on composite doors appearing in my area now.... you did say only time ;-) trying to get hang of it now which is hit un miss at mo
Nice video mate. One also plus with the GJ Tool is it not only picks the WXM but also the original profile Ultion U11, U12, U13 and U14 profiles as well as the Brisant D section. The other tool will only pick the WXM. So from a cost effective point of view I will leave it there 😉
Cheers bud 👍🏻🔑 I did say that the Nsuper only works with the WXM but I think your explanation is better 😂😂😂, another point is I think the lead time even if you order direct from them is about 2 week
I was about to ask this, saved me the job.
Your tools are superb, all of them!
Great comparison Seth, I use the nsuper and have had a lot of success but I'm investing in the GJ's version for the very reasons you've highlighted! Cheers mate!
It’s all about options mate, I’m getting the Nsuper cause I love new tools, but yes the GJ tool is a far superior pick when you master it
Just bought the Nsuper as back up for GJ THANKS FOR Sharing !!
Good to have a backup tool pal 👍🏻🔑
Another good informative video. Keep them coming. Thanks.
I’ll keep em coming as long as people keep watching mate
Just got the Nsuper and find it picks well anti clock but not good clockwise which is a bummer cause it don’t come out to spin it
Exactly mate, this is why the GJ tool beats thus, although the Nsuper is user friendly like you said it can’t be pulled out, also the one GJ tool covers all profiles from the earliest to the latest
Can you not bypass these thumb turns or does it only work on cheaper thumb turns?
No you definitely can’t bypass these, in fact most euro cylinders that are manufactured now can’t because they’ve done away with the weakness that lets us exploit them
What’s your advice I’ve been thinking of trying to become a locksmith what would you say should be my first steps ?
First step is ask yourself why? Are you interested in the trade , as in you have to love locks/picking, everything about them, second is check out how much competition there is in your area, if there’s already a number of established locksmiths there you may struggle to get it off the ground, and third you must have money to invest in yourself….training, tools, vehicle and stock it all adds up quickly trust me 👍🏻🔑
Do you find loosing the tension screw to allow free movement between pins, or tighten so it clicks between pins? I'm finding setting the wire to line up with the pin tricky as not sure it's lining up properly.
I’ve loosened mine off completely so the wire makes no clicks between to allow free movement….my advice is don’t get over fixated on the lines, they are just a guide
@@FortressLocksmiths thanks seth I did wonder, I've managed to pick the wxm in about 20 min but I'm guessing it'll become easier in time 👍
@@marklovell9236 it might be that you’ve come across a particularly tough one, I’ve had a couple that I couldn’t open no matter what. And it doesn’t matter if it takes you 2 or 20 minutes an open is always a win in my eyes
@@FortressLocksmiths that made me feel better 😂, not so bad when you have it clamp in a vice but have you been defeated at a customers property with one of ultion range?if so How do you deal with it?
@@marklovell9236 I uploaded a video a few weeks back where I had forgot my Ultion kit and ended up having to drill it out, was very pissed off with myself
Great video buddy, GJ all the way for me 👍🏻
Yep me too bud 💪🏻🔑
Eh up I have the n super and already have bought 2 and snapped wires ,not happy in the respect that you just can’t change the blades ,I am going to purchase the gj locks wxm one instead ,great videos👍
They are both a decent bit of kit but the Nsuper isn't the same build quality as the GJ tool
Agreed mate 👍🏻👍🏻
Hi there,
What is the name of this tool and where can I find it
Hi , it’s the Ultion pick and you’ll have to set up an account with GJ locks if you’re a trading locksmith
@@FortressLocksmiths cheers thank you. Roughly how much are they and is this far easy than learning to hand pic the ultions
@@SidFreeTheRealness the price is in the comments somewhere on here, abs they are easier once you know what you’re doing with it
@@FortressLocksmiths appreciate that thank you
Thank you👍👍
No problem, a very nice little tool 👍🏻🔑
I came across your channel (here in Spain) in the first lock down. I've watched all your euro lock videos, we don't have many mortice locks here. I've really gotten into it as a hobby and have bought some multipick tools. I've got quite good at raking and hopefully will move on to spp. I buy second hand locks from the local Sunday market. I managed to rake my own front door but the first time I tried the tension tool fell out, hit me on the knee and went straight under the door. Luckily I had the key in my pocket. Sorry for the long comment, I won't make a habit of it. I just wanted to say thanks for the interesting,helpful, and really addictive videos.
That’s alright Kevin I don’t mind long winded comments as long as they aren’t to give me abuse! 😂 and don’t you worry I’ve got a lot more videos to upload, and I’ve seen a lot of locks in Spain some weird and wonderful stuff over there
Good stuff mate. I apsolutely love your site it's my favorite by far and love your personality its gold we would get on like a house on fire thick as theives lol i love the gj stuff i get some here and there i like the epg i have kronos but i would have liked a gj one but im not a licensed locksmiths but my father was and my grandfather was and i should have been. I love every part of it but when i was much younger and the information i new it got me into a little bit of trouble had a stay in one of her majesty hotels for quite a while. And when i grew up a bit in the head years later after been in and out of the nick. i have all the skills tools van etc. But i cant get my licence because of my police record even though i paid my debt to society its baggage and they wont play not in Australia anyway. It really dosnt worry me to much at all I've done it for many years now i do a lot in the shadows word of mouth pubs etc friends its more than enough for me
Another great review 👍 definitely a plus been able to remove the tool for plug spin. Been looking at some of GJs tools are they much cheaper direct with him than on other websites I've seen ect ? Got my training in a week or so getting nervous 🤣 but I feel I've learnt a lot from you mate already cheers 🤣
I think they are about the same price pal, they just resell hus tools 🔑 and good luck with your training mate, where are you doing it?
@@FortressLocksmiths MLA mate 👍
@@fortifiedlocksmithswakefield ahhh right, well good luck then buddy
@@FortressLocksmiths cheers mate should be great. Listen and learn and best not say owt like well that's not how my man fortress does it 🤣👍
@@fortifiedlocksmithswakefield haha that’s the one pal, listen and learn and smash through it, you’ll fly it mate 💪🏻🔑
nice info review like the GJ
They are both nice, but GJ wins this one 🔑
@@FortressLocksmiths finally invested in 1 as there are alot of HS locks on composite doors appearing in my area now.... you did say only time ;-) trying to get hang of it now which is hit un miss at mo
Gj wins all day long….take care!!!!!
It does, but I like both 😂😂🔑
Buy once with gj tools
@@fireblaster9961 unless you’re a heavy handed fecker 😂😂