Mopar Jeep Performance Parts 2" Lift Kit for Jeep Wrangler JL
Вставка
- Опубліковано 23 лип 2024
- Mopar Jeep Performance Parts 2" Lift Kits - www.quadratec.com/p/mopar/2-l...
The Mopar Jeep Performance Parts 2" Lift Kit was designed by Jeep engineers to work perfectly with your Jeep Wrangler JL without any modifications required. When installed, the lift will allow fitment of 35" tires on standard flares and up to 37" tires using Rubicon High Top Flares. - Авто та транспорт
Rob - You do an awesome job explaining the kit features and installation. Our Mopar JPP engineering team spent a lot of time engineering and testing this kit right along with the development of the all new JL Wrangler. We passed our vehicle durability with flying colors. The new 2 1/2" Fox shocks are really great and we tuned them specifically for the 35" tire. We like the BFG KO2 35's that are C-Rated. Many folks aren't paying attention to their load rating and many 35's are actually designed for truck use and as such are D or E load rated. All the Wrangler needs is C. We are working with other tire manufactures on C rated 35's. What the C gives you is the best on road ride. E's are much stiffer and you will sacrifice ride. Another excellent set up is the 2" lift with High Top Fenders (Rubicon Fender Flares in the case of the JL). This combination allows for the installation of 37's. Big tires / Low ride - The best combo for real off-road. Check out the two vehicles we just released for the 2018 Moab Easter Jeep Safari. Google the Jeep Jeepster and Nacho Jeep. They are both set up with High Top Flares and 2" Lifts. Also great that you mentioned light aiming and alignment specs. Both important installation elements. We also have a speedo cal update that can be purchased through your dealer. Unfortunately, gone are the days of easy cal changes to vehicles - with vehicle gateway security protocol we needed to address that ourselves. We have updated calibrations for all tire and axle combos. Ask the dealer for Wrangler "Custom Cal" found in MVP. Finally, I see a question about wheels. All of the JPP wheels for Wrangler (Beadlock, Geared and Gladiator) have the proper 12mm offset. This is different than the production wheels. The 12mm offset give you the proper clearance for the tire in turns and articulation. Some folks use spacers but we wouldn't recommend it....plus the JPP wheels all look great. See you on the trails.
Thanks for the great comments Christopher! What do you do with Jeep if you don't mind us asking?
why is this 2" lift not available for the 2018 wrangler rubicon JL 2 door? its only available for the 4 door.. whats going on?
@@stustamps5416 here's information that i've been able to locate directle from MOPAR. 2018, 2-Door Jeep® Wrangler JLequipped with 2.0L engine. P/N 77072397 / 2018, 2-Door Jeep® Wrangler JL equipped with 3.6L engine. P/N 77072396
@@stustamps5416 you may want to look at the updated Mopar catalog for further help in your build.
www.mopar.com/content/dam/mopar/pdf/performance-catalogs/JeepPerformancePartsCatalog.pdf
Hello everyone.
If you allow me, I ask you a question from the old continent. I live in Spain (Europe) and I would like to know if I can install the 2 "Mopar kit on a JL sahara 2.2 multijet Diesel. You have some tests with the European models. Thank you very much and my sincere congratulations for your good work.
Thank you for your answer, in Europe it is not forbidden to climb 4x4s, only it is more difficult, because an engineer must verify that the car does not lose its safety to circulate on the road.
I think I bought this kit, and as you say a BFG of 35 ".
Thanks again the best
i ordered this kit, correct part numbers, and it raised my 2020 jeep 4 inches from stock height
Plastic bumpers? Stock and no added weight I'm assuming
Rubicon jeep or sport ?
I'm sold on this kit. Not cheap, but its complete and oem.
Nice overview!
So this doesn't require an adjustable trackbar or any other components? Great video, thanks.
No rear track bar bracket ? Or 2 inch lift does not need it and the rear axle is Centered ?
Sorry for my english
When id this lift kit going to be available for the 2018 wrangler rubicon JL 2 door? I have the 2.0 turbo.. why are they snubbing the 2 door owners?
What is 2021 gladiator suspension fit on a 2.0 2018 jeep Sahara
Hey, I got a question. So I have a jeep gladiator sport s with an ecodiesel motor and I did go ahead and installed rubicon/Mojave higher fenders. If I got with mopar 2" lift kit, would it give me enough clearance to go with 37" tires? And would I need to regear? Thanks a lot.
wich model and brand of track bar you recomend me? my jeep is a gladiator overland with diesel engine ecodiesel v6
Think mine was installed wrong as I now have a very noticeable rattle coming from my passenger rear. Any thoughts as to what it could be? 🤔
Is an adjustable track bar needed ?
I am so confused. I got a moral lift kit that's specific for ecodiesel, I installed it and realized that it only gave me 2" on my gladiator sport. While everyone else is getting 3.5"
So what happens when the shocks wear out? Buy a whole new kit?
What can I do if I damaged my rear one yesterday (I have this kit installed) however I cannot see this shock being sold separately
Should have an internal bypass version
What’s the difference 2018 jeep Sahara 2.0 turbo between a two door and four-door 2 inch Mopar lift I know the parts number is different
Hello Rob, one quick question if I may. Do you need to add a reinforcement plate on the back of a Rubicon if you decide to opt for a Mopar suspension lift kit and 35” tires? I cannot find an official answer anywhere. Thank you and keep up the good work!
Does anyone know if these springs will be able to accommodate heavy bumper/winch combo?
Yes, should be no problem. You'll probably lose 1/2" of the front lift because fo that.
Hi rob :
Would this kit fit the 2.2 diesel euro spec right hand drive ???
Thank you
They have a similar kit by mopar. I am about to install one. It costs about 2k. You have to make sure it is for ecodiesel and it's a different kit. Good luck
Why is there not track bar front and back will not be centered under the body for sure !!!
I purchased this lift from Quadratec and had my dealer install it. Quadratec shipped it right to my door, very quickly. It is fantastic! The ride is super smooth, but controlled, and the handling is nice and tight. I have it on a Rubicon with BF Goodrich KO2's, and it tracks staight and true, unlike many lifted Jeeps I've driven with 35's that like to wander all over the road, following grooves. This kit is factory engineered and it feels like it. I highly recommend it. Now I just need a programmer for the JL to reset my speedometer! @Quadratec, are there any on the way?
If your dealer installed this kit, they should have re-calibrated your Jeep for the larger tires as well. I would suggest your go back to your dealership and find out why they didn't do that when they did the install.
I’m doing the same thing and your customer service told me I could fit 37”!
You have the spring bow that everyone else is seeing with this kit in the front?
On a Rubicon with the High Top Fender Flares you can fit a 37" tire with this suspension.
RayGrove82 I want to buy this lift, but I’ve heard about the springs bowing as well. Have they come up with a solution for this yet?
I have a 2016 JKU. I have the mopar lifetime warranty. I went to the dealership where i purchased my jeep from. They told me if I bought this left kit from Mopar and had the dealership install it it will void my suspension warranty...? I found this to be a little bit of an oxymoron since it is a genuine mopar part and it would be a dealership install.... Does anyone know if this is valid information or is my dealership full of shit?
I’m purchasing a 2018 JL Sahara. Do you think I could put 37 inch tires with this two inch lift? I’m not planning on doing any off roading until I put the high line fender flares on. I’ve seen people doing it and wanted someone’s opinion. My Sahara will have a manual transmission.
brett pollard get a Rubicon bro it’s not that much more
You need a Rubicon, it has the Dana 44 axles you need to run 37s, you really will need hydraulic steering.
Great video…. I want 37” will this work on 2” lift? Dealership has it on one of there keeps
It sure works on my JL 2021 Rubicon with 37s
Has the problem with the Springs Bowing Out been fixed yet ?
Partially in the newer kits, but it's still recommended to replace those gray perches with Rockkrawler correction pads to fix bowing.
@quadratec @mopar @jeep I have a 2013 Wrangler JKUR, is there a way to get those black/plastic covers for the rear shocks?
No. Those covers are specifically made for the new Fox shocks included with the JL Kit.
Thank you for the speedy response! You guys always seem to go above and beyond in everything you do! I wish that had something similar for the Fox shocks for the JK, it doesn't seem to complete to add it after install. @quadratec
Can you mount 35s on your stock JLU Rubicon wheels with this lift and no wheel spacers?
Yes! This kit will allow the fitment of up to a 35" tire on Wranglers with standard height Sport or Sahara fenders and up to a 37" tire on a Wrangler Rubicon with the high clearance fenders.
Quadratec so just making sure unlike other versions the wheels have the right backspace on the stock wheel to not have to replace your wheels in order to run a 35 on the stock wheel with this kit on a Rubicon?
Would I need an adjustable track bar for this lift kit?
Yes, highly recommend it if you gain over 2". At least the adjusted front track bar.
How can I order the Mopar 2 " lift kit for my 2 Dr 2018 Rubicon jl ?
I agree! I am in the same boat as you are, there is not one available for the 2018 wrangler rubicon 2 door JL. whats going on?
I know the video has been out for a moment. Is this kit actually compatible with the 2.0. Mopars site still only says 3.6. But i haven’t seen anything stating what’s different
There is a different kit for 2.0 version
How about the ecodiesel?
Does it give you a 2 inch lift using heavy front and rear bumpers, a winch?
kc
This kit will give you 2" of lift over your vehicles existing ride height on the original factory suspension. If you take a measurement from the ground to the body of your Wrangler before you install the kit and after, you should see 2" of difference. (of course this is assuming that you use the same tires before and after to take the measurements)
If you've added heavier than factory bumpers and accessories which have caused your Jeep's suspension to compress, it will still compress the same amount with the new suspension.
The lift is different on different trim, but you should gain at least 2" on Rubicon and more like 3"-4" on Sport/Sahara models.
Do you need a steering stabilizer with this kit?
Not really, unless you have steering issues after install which aren't caused by improper installation
What if I need to replace one of those shocks? You said it is exclusive to this kit.
we can order you one!
Can someone explain the confusing warranty around this? Does the dealer need to instal it for warranty to hold up or can be installed somewhere else
It has to be dealer installed to maintain the warranty
Has to be done by a dealer. Or you'll loose your warranty
Million dollar question....does it void the warranty even though its through Mopar/Jeep ????
Nope it doesn't at least that's what I remember them saying when I ordered my JL
No it does not. My understanding is and this is what I am doing right now. Order it from the dealer and let the dealer install it. Any work your dealer does to your vehicle is usually warranted. In this case the lift will not void the warranty bc it was installed by the dealership themselves.
It says 2” but more like 4”...
Wtf ?? There is a diesel version of the JL :O that changes everything
Whats the final price of this kit?
Your first born
Will i be able to run 35 inch tires on my 2019 Jeep Wrangler sport?
Yes, easily. I actually put the 35's on a month before I installed the lift (not recommended) but I had no issues on road. As you've probably heard, for the JL sport its giving closer to 3 inches of lift.
How $much$ is it????
$1500 from them but if you look hard enough (www.tascaparts.com/oem-parts/mopar-suspensio-lift-77072395) you can get it for $1221 plus $60 for shipping
$1255 from BAM Warehouse + $75 shipping