It's really important to make sure you have a decent working surface. Lmao Also, my camera work and video editing has improved tenfold since this video.
I don't care, I'm subscribed and watching them all from now on. I've been watching shovelhead videos from here in the shit uk where the only good thing is my old shovel. Keep shit funny coz that's where it's at... Great work in its original form.. nearly choked and spat my tea all over my screen because of you.
@@DrVlok im glad you enjoyed it! Videos are sparse at the moment. I have a lot of parts out getting work done, heads ported and polished, Triple trees getting shaves, and so on. I will get back to weekly posts once I start getting parts back.
Hey thanik you, this video will help alot, i have an old shovelhead trike that wont do anything, that wiring video you said your not going to make would help alot too lol
.Cover 'gasket 'pionts ' Condenser and gap plugs to points timing ...and you are right about the ol ladds not agreeing... Points over elec any day for me and that go's for the classic cage i drive also 😉😎 Keep up the good work .👍
Lmao! I do think it's a generational thing. There's nothing wrong with points at all. They work fine. I just prefer electronic, its a lot simpler to me.
What about old school side of road technique? Set points gap on the firing lobe, set plate in the middle or to a spot u can get the bike started, advance until you hear ping back off very slowly until ping goes away call it good.
Thanks for the comment. Dyns S is a great ignition! I prefer the Dyna 2000i because i can tune it on my laptop, but I will run a Dyna S any day of the week.
Hey brother I got one for you I got plenty of spark and plenty of fuel,coil was tested functional,battery perfect 73 shovel 4speed transmission all I got is headlight and tail light kick only and she won’t fire, she’s not sucking air I’m completely dumb founded any idea s I’m open to try anything
What kind of ignition does the bike have? James has a good point with the pushrods, that can definitely make for hard starting. I would recheck static and mechanical timing too.
So tdc compression stroke on front cylinder. Then adjust the gap on the points. Then with test light lock plate right before it lights up. Thats it ? How do you know if you need to go clockwise or counter with the plate during the test light step ?
Advance the weights to fully open (twist the middle peice) Then test with a light and pock Plate before it lights. Normally, you put the plate on so you can rotate it clockwise to set timing.
Show me a points ignition that doesn't need to be touched for hundreds of thousands of miles. Any modern electronic ignition is leaps and bounds better than points.
You know what you are talking about, rare on YT. Your channel is a hidden gem. I'll spread it around!
Much appreciated, man! I'll do my best to keep content coming.
I really liked the close up of the bench, no other channel goes into this much detail.
It's really important to make sure you have a decent working surface. Lmao
Also, my camera work and video editing has improved tenfold since this video.
I don't care, I'm subscribed and watching them all from now on. I've been watching shovelhead videos from here in the shit uk where the only good thing is my old shovel. Keep shit funny coz that's where it's at... Great work in its original form.. nearly choked and spat my tea all over my screen because of you.
@@DrVlok im glad you enjoyed it! Videos are sparse at the moment. I have a lot of parts out getting work done, heads ported and polished, Triple trees getting shaves, and so on. I will get back to weekly posts once I start getting parts back.
Good video and not many on this topic. Currently rebuilding a 70 shovel. Thanks
Thanks Mike! I'll do my best to keep them coming. It's riding season right now, videos will pick up again soon.
Thanks this is the best video I've seen on timing
Glad it helped!
Great video man. Going into my folders for reference materials 🤟🏼🔥👍🏼👌🏼
Great video man, you do a great job at explaining each move you make.
Thanks man! Much appreciated, like and subscribe, I'll keep em coming.
Not too many people teaching about this on UA-cam and I haven't met one that explains it better than you have right on brother
Much appreciated!
Better than most, pretty much right to the point which is great.
Thanks! Newer videos are definitely better! Editing and no shaky hand held video, lol.
Hey thanik you, this video will help alot, i have an old shovelhead trike that wont do anything, that wiring video you said your not going to make would help alot too lol
.Cover 'gasket 'pionts '
Condenser and gap plugs to points timing ...and you are right about the ol ladds not agreeing...
Points over elec any day for me and that go's for the classic cage i drive also 😉😎
Keep up the good work .👍
Lmao! I do think it's a generational thing. There's nothing wrong with points at all. They work fine. I just prefer electronic, its a lot simpler to me.
@@DWchopshop 😎👍
Too the point and with good instructions. Thanks
Thank you, and your welcome! Hope it helps.
Damn straight! Highly recommend.
Thank you! Much appreciated!
Very helpful
What about old school side of road technique? Set points gap on the firing lobe, set plate in the middle or to a spot u can get the bike started, advance until you hear ping back off very slowly until ping goes away call it good.
I've always had more of a do it right the first time so your not sitting on the side of the road mindset.
Wish I could see video that shows me how
78 Shovel kick and button, what do like for ignition, Dyna S? Rawhide isnt available so it appears. You make informative videos.
Thanks for the comment. Dyns S is a great ignition! I prefer the Dyna 2000i because i can tune it on my laptop, but I will run a Dyna S any day of the week.
@@DWchopshop thanks for the reply, Dyna S it is then
Hey brother I got one for you I got plenty of spark and plenty of fuel,coil was tested functional,battery perfect 73 shovel 4speed transmission all I got is headlight and tail light kick only and she won’t fire, she’s not sucking air I’m completely dumb founded any idea s I’m open to try anything
adjusted your pushrods?
What kind of ignition does the bike have? James has a good point with the pushrods, that can definitely make for hard starting. I would recheck static and mechanical timing too.
Every other video on YT says the short lobe not the long lobe.
Master cylinder rebuild please! 😁
I have next Monday off, and I do need to get that thing fixed. I'll try to knock it out. Sorry it's taking so long lol.
So tdc compression stroke on front cylinder.
Then adjust the gap on the points.
Then with test light lock plate right before it lights up.
Thats it ? How do you know if you need to go clockwise or counter with the plate during the test light step ?
Advance the weights to fully open (twist the middle peice)
Then test with a light and pock Plate before it lights.
Normally, you put the plate on so you can rotate it clockwise to set timing.
Enjoy some sockets!
Points rule... you can keep points and condenser in your pocket, nothing wrong with them whatsoever..
run electronics and bring some walking shoes lol
Show me a points ignition that doesn't need to be touched for hundreds of thousands of miles. Any modern electronic ignition is leaps and bounds better than points.
I run electronics and keep a spare set of points in the bag just incase
Everyone always says it would bore us but should sai😂I don't know wireing worth shit
I'm going to do a detailed video on chopper wiring on this sportster I'm working on, once it gets to that point! don't worry, lol.
Points are reliable. Anyone with a Shovelhead knows that electronics belongs on a Tesla.