Це відео не доступне.
Перепрошуємо.
Homemade Drill Press Machine | Simple Drill Press Table from Handle Drill
Вставка
- Опубліковано 10 лип 2019
- Today Kwando Technic will show you how to make a drill press machine. After watching this video you'll be able to make a simple drill press table.
#drillpress; #kwandotechnic; #howtomake
Superb one made by you using simple things.
Parabéns amigo essa sem dúvida foi a melhor que eu já vi Deus te abençoe sempre.
Thank you so much!
Pode crer, a melhor que vi até agora e a próxima do meu cantinho da discórdia barulhenta kkkkkkk
Вот он, самый простой вариант, лайк однозначно!!!!!
Yes, thank you!
@@KwandoTechnic
What welding machine you use thank you
@@KwandoTechnic
What welding machine you use tig welding name thank you
@@user-mq2dl9gz5e You can refer this one: bit.ly/3uha3Tl
@@KwandoTechnic
But it high quality hard using thank you
This is one of the simplist, yet, Best, {seemingly,} most durable, designs I have seen for a DIY drill press.
The design is so Simplistic in it's design that it is actually a thing of beauty.
That being said, however, I do foresee two potential flaws. Well, perhaps flaws might be too negative of a word. Maybe diffuculties or imperfections. I think one of the isssues I am seeing could actually just boil down to a maintanence consideration, a frequent - and possibly even a very very frequent Maintanence issue.
The first, and probably more serious issue I believe I would have to consider before builing or replicating your, albeit ingenious DIY design, is Precision. The Outer 'Sliding' Sleeve of Steel that runs over the Main tower of Guide Channel," the Main Support "Tower" of Lead or Steel Pipe that the Drill runs horizonally on had a fair amount of play. Also there was No guide channel to prevent the Outer Sleeve from Horizontal "Corkscrew" rotation. I estimate you could get anywhere from 3/8 to 5/8 play parallel from the guide Main "tower Pipe at the tip of the drill bit, meaning Vertical play. And, because of the "Possibility" of Corkscrew rotation, theoretically the Tip of the Drill Bit could Leave the Work 'Support Table Altogether.
The second, and Far less serious iissue, something that cpild potentially become more of an annoyance than a "Problem, per se, iis the fact that the active motion of the Press Mechanism utilizes an outer Sleeve ttravelling anlong a Stationary "Tower" Steel Pipe, rather than a Geared system, worm and wheel for example. {Granted a gearong system would be incredible sophicated to design and a nightmare to build as a DIY project, That isn't the point I was making tho. A gearing system, in an enclosed case would get Lubricated and be protected in the housing of the unit )Most likely.) While the simplicity of your design iis beautiful, for the Slide Mechanism to function 1/2 reasonably, or even somewhat smoothly it needed, and would continue to need grease. In any environment where you are using a Drill Press, there is without a doubt going to be filings dust, most likely copious amounts of saw dust, possibly engines running kicking up debris and pumping smoke, pollitants into the air, people Sweeping up - again kicking up dust. The grease on the Upright Steel Pipe, and therefore the inside of the "Travelling Sleeve," would endlessly be collecting and trapping dust on top of dust and particles and everything in the air and whatever else blows in. Grease + Particles of Every and Any kind = Sticky messes. The longer you leave it the stickier and Messier it gets as well. You woll be forever cleaning degreasing and relubricating the Steel Pipe Tower and Travelling Sleeve, Or you'll be fighting the Stickiness and having More trouble with the Precision issues I mentioned earlier.
Don't get me wrong. It Really IS the Very Very Best DIY design I have seen as yet and I have been looking, Been Searching actually. I am not wasting $100 on Ebay for some Flimsy Puter alloy P-O-S thats going to break the first time I blink near it. I don't want some wooden guides - wood on wood, wooden handen, wooden cog guarenteed to snap the first time you exert any pressure stupid design waste of time and material like I have seen 1/2 dozen time either.
Their Was a Ball Bearing Drawer Slide design that "Looked" promising, but upon closer scrutiny it just had NO hope of any longevity.
Your Design is By far, Bar VERY far the Best So Far. I "May" tweak the design slightly to inclue a Vertical Guide and Groove Channel and/or Channel - interanal "Key" wiithin the Slider to keep the slider's Groove Lined up with the Tower Steel Pipe's Groove. If I cut the grove }"Key" pperfectly and cuut dual tapers at each end on opposite sides to give it a fractional "rocking" just at the Vear tip to help promote the start of travel, it "May" act similar to a Piston ring in an engine and take up the Slack space between the Upright Tower and The Travelling Sleeve, But Still allow for travell, with the Fractional Taper, while being Sloghtly tight-osh or Stiffish, it would prevent scorkscrew rotation, as well as prevent or at least Greatly reduuce vertical "Tipping" In - Out motion of the Drill bit tip.
I'd try that, or ..
If the "Key" design binds up, I would try getting "Bird Ammo," for a Sling shot. I'd then use my Round file to make either 2 or 3 - Probably 3 channels inside the Travelling sleeve, NOT all the way to the Tops and Bottoms tho of course. I'd stay a good 1/4 inch from the ends. The uuse my zip grinder to cut coorresponding grooves into the Upright Steel Pipe. IIt May be tricky to keep the Bird Ammo in the Sleeve. II'd Likely use some of my neodymium magnets on the outside to keep the "Bearings" inside, while I got the Slider into place, remove the Magnets - grease and ..... Wowee. It may take a bit of finicky doing, But I have done my share of doing, adjusting, adjusting, intil I got it Just Perfect.
I think with just a little Tweaking your design could be One hell of a Long term, Extremely High Quality tool that can do Professional Quality work. I'd also Dismantly the Drill and Permanently attatch the Motor in an enclosed case with a Separate Switch. If the Drill is/was Variable Sped, I'd just wire in a Variable 3,4, or 5 speed switch rather than that mess of a cord with the Ugly drill hanging off.
The upshot is,
Thank for an Excellent Design. I think it could use a Little bit of refinement to be "Finished." But I am Very impressed.
Thank You !
Xan
Thank you so much for your advise. You are really expert. I will improve and do another thing better. Regards!
@@KwandoTechnic - I Used to work in construction, "Once upon a time."
We used to get sent to do the Jobs that other people either : A).refused to even "ret" to do.
Or : B). the Jobs other people "already tried" to do but, the screwed up, so we had to come behind and "Fix."
:- ))
I was being Totally serious with every word of praise I gave you.
Your design IS ingenious.
: My "suggestions" for improvements, are just that. "Suggestions."
You have a functional design that will be more functional than, "Will do in a pinch."
Granted, it does have the accuracy and the 'repeat' for multi function - repetive work accuracy plus the binding issues, and the couple others. But still, it DOES still have the Durability and the Beauty of Simplicity.
I honestly do intend to Create a "close" facsimile" of your design with the few Modifications, I have suggested. The things like removine the Motor from either an electric or Cordless Drill and Mouting the Motor and Chuck on the Pulley apparatus so the Drill handle isn't part of the weight of the "Press" and the Weight of the "Entire Drill won't diminish or Add to the Balance Issue adding to accuaracy issues.
- Adding a Seperate "Onn/Off" switch Mounted other than "Part of the Drill" itself seems a Logical next step. - I am sure you would have Thought of that after using the Drill press a few times anyway.
------------
Thank you for your Kind reply to my Comment. It's Posters Like you who give such positive feedback to peoples comments that make it worth commenting.
:- )) I always "Try" to keep my comments to Positve "Suggestions," and Praise. Especially whe I see something like this - Something that is Such a Brilliant Simple Design. My ONLY Remark that ISN'T a High Praise, that Could be a "near catty" remark is "I wish I had though of This First !
But, even that ends up being high Praise to you.
Hi5 Man
And thanks for the Design.
i'm 2 years late but i was more impressed with it looks like he built it and welded it with a tig torch without any gas it appears... thin metal pieced together with tig torch tacks no gas...impressed
все очень просто, но круто , сделаю себе тоже , ты молоток
Thank you. You are welcome!
Hi good day,, great job bro'....@yus channel,from jolo Philippines.
Hello!
Excelente, muy bueno el trabajo; simple y efectivo.- La Pampa Argentina
Thank a lot!
I like your work! Thanks for the ideas I need to learn how to arc weld
You are welcome!
Lijepo je i poucno. Ljudski mozak je nesto sto pokrece svijet.
Thank you so much!
музыка прям умиротворяющая!!!! да и конструкция достойна лайка!
Q1q
very good idea bro some more to great design
Thanks!
Good craftsmanship. I have gone through all the comments and find one giving detailed analysis of your project and your positive Reciprocation to that. Well done.
Thank you so much!
Excellent idea, thank you
Many thanks for your support!
Can I know the length of pipe and its size
Good technique.
Thanks!
Damn, now I've got welding flash!! Thats the simplest one to make thats
been shown, starting one tomorrow. Ducks Nuts!!!!!
Supeerrrrr duppeerrr
Thank you!
شكرا جزيلا لحضرتك
Отличная идея !
Thank you so much!
Exelente trabajo amigo
Thank you so much!
Waoooo mantap kawan.. By las wates
Спасибо всё понятно и без слов !
Show de bola, muito bom!
Thank you so much!
do bemfica, viva o bemfica
Muy bueno y practico podrías dar el tipo de petr (cuadrado) que uso y el tubo que diámetro y la cedula de espesor gracias
Просто и оригинально-молодец!
Thank you so much!
Простая и заслуживающая похвалы конструкция!Браво изобретателю.Спасибо!!!)))
You are welcome!
Faltou AS MEDIDAS DAS PEÇAS E DOS PARAFUSOS
Have a nice day my friend,ive done hugging u.
Have a nice day my friend ive done hugging you
bien
Thanks!
Me gustan los videos porque son de mucha utilidad y sirven para muchos trabajos
You should do it.
Отлично зделонна спасибо
Thanks!
In the next project, I like the drill more precise. I see the drill swaying. Btw, it is very good idea. Simple and Brilliant!
Many thanks for your support!
Sería bueno tener dimensiones referenciales
Show parabéns 👏
Thanks!
Ecelente travajo 👍👏👏👏🇵🇦🇵🇦
Thank you so much!
Excellent.
Thanks!
Fabulous
Thank you!
Классно все пересмотрел этот вариант лучше понравился мне буду тоже делать и тисочки классные!!!
Thanks!
@@KwandoTechnic& yaz
Тиски классные а стойка фуфло, вся ходуном ходит, болтается, есть гораздо интереснее варианты и без сварки
Essa ficou a cara do cara. parabéns.
Thanks!
Boa inversão parabéns
Thanks!
Очень понравился станок под дрель буду делать себ
Thank you so much!
Yes bro this is simple way. Other all vedio's bit hard way to make. From India big salute
Thank you so much!
Моладест самый простой для дома будте здаровыйм спасибо большое
Keep safe, bro!
Exelente herramienta
Thank you so much!
Hola, se pasó con el soporte para taladro.
Voy a tratar de fabricar uno igual.
Saludos desde Tucumán-Argentina.
Mario Lopez.
Yes, you are welcome!
Perfect work. God bless you.
Thank you so much!
Great!
Thanks!
Bravo
Thank you!
Legal
alatnya bagus
Muito bem gostei 👍
Thank you so much!
bro please tell me witch type of welding machine you used
I use TIG welder as: bit.ly/30T55h0
very nice
Thanks!
Good
vai drill masin stnd ke napati mnuse bataogi ta hamaku gankari milega
Esta muy bueno la base del taladro 👏👏👏👏👏👏👏
felicidades y gracias por compartirnos tu proyecto, de favor podrias compartir las medidas
Please see video detail help me. Sorry about this inconvenience.
@@KwandoTechnic gracias de todos modos, le vere muy detenidamente agradezco la atencion y nunevamente te felicito
Super ,
Thanks!
As medidas das peças e bitola dos materiais são muito importante Para QUE ASSISTIR ASSIM COM O LIKE É IMPORTANTE PRA TODAS QUE POSTAM VÍDEOS, MUITOS DESEJA FÁBRICA
Show 👏👏👏👏👏👏
جيد واصل
Thank bro!
Vou até fazer um pra mim também
You should make it.
Nice video👍
Drill machine and angle grinder with a single 775 motor 😮😲!!! Please watch and comment ua-cam.com/video/7xVqFb8Qbro/v-deo.html
مبدع
el mejor
Nice Nice
МОЛОДЕЦ..НЕТ СЛОВ..САМИМ МОЖНО СДЕЛАТЬ СТАНКИ..А ТО КИТАЙСКИЕ ДЕРМО ПОКУПАЕМ..
Yes, you can buy as your work deman.
А если сварочного нету? И может можно такой с фотоувеличителя забацать?
То что нужно!
Thank you so much!
Muito simples creativo e inovativo. Bom susseso.
Thank you so much! Happy new year!
Que tipo de molas são essas e onde vc comprou , são molas usadas onde..
You can buy it at mechanic market
nice
Thanks!
ES UNA BUENA IDEA ..SOLO QUE LE QUEDO MUY DESAJUSTADO ..
Thanks!
Asen videos pero nunca sacan medidas de lo que están asiendo saludos desde el estado de mexico
Nice work,what type of filler rod your using?
Which welding machine you use brother
I used TIG welder as: bit.ly/30T55h0
ماشاء الله
Parabéns! Muito bom!
Poderia por favor divulgar as medidas em centímetros de cada componente?
Sorry about this inconvenience!
100% simple and perfect
Thanks!
I want to purchase this online . Is it be available on Amazon India?
No, I don’t sell. Sorry!
На квадратной трубе люфтов меньше. Идея хорошая.
Many thanks for your opinions!
Good video, bro! Easy to make as your discuss. Like you!
supper supper
👍👍👏👏
que tipo de maquina de solda é essa?
I use TIG welder as: bit.ly/30T55h0
Які понти з нижньої пружини якщо площадка всерівно фіксується? І як для мене малуватий хід вверх.
I could have put the measurements in the video to help.
Please see it detail in video help me. Thanks!
What type of welding machine it is
You can refer this one: bit.ly/3uha3Tl
Nice build! it was great to see how you made it! You are a very smart an creative man!
👍👍👍👍
💥👏👏👏☝️
show!!!!! como e o nome dessa máquina de solda
I use TIG welder as: bit.ly/30T55h0
Mantap 👍👍👍👍
Quanto custa o suporte para furadeira
I don't sell. Sorry!
Como chama esta solda que voce uso?
TIG welder, You can refer this one: bit.ly/3zRuNUY
Que máquina de solda vc está usando aí pra fazer essa soldagem amigo.
You should refer this model: bit.ly/30T55h0
@@KwandoTechnic 0p0
Tig
Hello I'm making a drill stand it's approximately 2" tall and I'm having trouble figuring out how to come together with measurements to make my stands arms work
Beautiful job very creative will you share the plans please
Hello, wich wilding machine you use it? I like it
please see my welder more detail at here: bit.ly/30T55h0
@@KwandoTechnic lol ppl always interested and curious your welding machine..but i guess it was the torch that ppl are interested in 😊😊
liked
Thanks!
HELL YEAH!!!!
Almost watched the whole video but the music was putting me to sleep
I already fixed it.
ಸೂಪರ್ ಸಾರ್
Ye mashin milegi khya
Идея и правда хорошая и трудится человек, но люфт на люфте, если не заморачиваться о точности сверления, то да, а так требует доработки.