I have the Lancia, love the car despite not being able to keep it in a straight line. The car is all over the place. I'll do the modifications you suggested for the steering. Amazing video. Thank you.
Making it works the way you want is the good part. Best of luck. You might want to check out this ua-cam.com/video/x_30UoxF2jM/v-deo.html, they also have a Lancia version
Instead of super glue, baking powder and re-drill try this, it made my car feel 10x straighter and more quality feel: cut soda can metal with scissors to wrap around the shoulder of that shouldered loose screw. It can only wrap around 90% to keep from interfering and make sure it is not too tall for the hole. Before you form the aluminum sheet to the screw shoulder, be sure to repeatedly roll it over with a socket to lower the lip left by the scissors. Wrap the screws smooth shouldered threadless part with the shim. Double check that it won't interfere once installed. Wrap screw and roll in your fingers until the slit cylinder shim fits perfectly in the screws hole. Install shim into hole then begin to thread the screw in through the center of it. Double check that as the screw goes in, it goes in smoothly and doesn't crush the shim around it.
Not sure what you mean. 24mm Dia is the stock size. I put in 2845 motor meaning 28mm Dia but need modification. No need to change servo if it is 3 wired
I have the Lancia, love the car despite not being able to keep it in a straight line. The car is all over the place. I'll do the modifications you suggested for the steering.
Amazing video. Thank you.
Making it works the way you want is the good part. Best of luck. You might want to check out this ua-cam.com/video/x_30UoxF2jM/v-deo.html, they also have a Lancia version
Instead of super glue, baking powder and re-drill try this, it made my car feel 10x straighter and more quality feel: cut soda can metal with scissors to wrap around the shoulder of that shouldered loose screw. It can only wrap around 90% to keep from interfering and make sure it is not too tall for the hole. Before you form the aluminum sheet to the screw shoulder, be sure to repeatedly roll it over with a socket to lower the lip left by the scissors. Wrap the screws smooth shouldered threadless part with the shim. Double check that it won't interfere once installed. Wrap screw and roll in your fingers until the slit cylinder shim fits perfectly in the screws hole. Install shim into hole then begin to thread the screw in through the center of it. Double check that as the screw goes in, it goes in smoothly and doesn't crush the shim around it.
Nice idea to use soda can as shims, thanks
Love the video where did you print the hoonitruck decals from what website
DIY
@@customtoyrevolution can I purchase a sheet frome you I don't have a printer
I love your video. Could you please attach to the video the file you created to customize the remote control car? I beg you🙏🏼🙏🏼🙏🏼
hey I have the udirc 1602PRO, is it possible to find/make decal sheets for it?
Can we make it steer a bit more ? I mean a tighter steering angle.
replace the servo saver with a longer servo horn. Aftermarket ones usually come with 3 positions
Hi i am gettimg the udci truck but i need to no what motor i csn put in it insted of the stock one i was think8ng the 20T motor what servo do i need
Not sure what you mean. 24mm Dia is the stock size. I put in 2845 motor meaning 28mm Dia but need modification. No need to change servo if it is 3 wired
Do you have to change the spur gear and whats the pinions and spur t
Only change pinion from wltoys 27T 0.7mod
Thank you@@customtoyrevolution
Did yours stop going backwards?
mine works fine with the upgraded electronics
Car int fiber upgrade link and servo upgrade
yes?
Wow I just realized how poorly I typed. Do you have a link for the parts you upgraded?
where did you get your wheels from
Amazon. You can also get them from AliExpress or eBay
Are there better tires than the stock? I have the brushless 1601 pro and 1604 pro and they ate the stock tires... thoughts
Were did u get ur shocks from
From Aliexpress 2 yrs ago. I shorten them, originally for Wltoys A959. You should be able to something that fits