I think maybe you should try and tackle learning how to make a base map for it. If anyone can do it, it would be you with your motto "if someone else can do it why can't i" but man sick car I've followed every single video ever since the start of the type R build and you are without a doubt doing stuff no other "car UA-camr" is doing. You're in you're own league man keep it up
You can use the metal part in the wiper blades to be able to pass the wires easily from the engine bay to the inside. Since it's flat it will go easily
Sometimes insread of using two sided tape, we will use velcro to mount stuff that might need to br removed. Its stong enough to hold my radar detector on my R1 @170+mph and its cleaner than wire ties
PLEASE READ DEVIN - Haltechs website has a section to download base maps for your car to start from, I'd highly suggest giving that a go and work up from there.
Prolly too late but there’s a 3d printed mount online that’s cheap that puts it in the stock location, mount the wb1 to the back of it route the plug and play box into the shifter cable area. Mine came out clean no cutting
Don't know why it was said that the 8 ecu is bad. When flash with tephramod, they are very capable. Obviously, a haltech is better, but the stock ecu isn't bad as stated.
Side note, I'd say get a pro fab hood dump setup on the Type R (if you must do a hood dump, which is highly ill-advised UGH). The current one is blasphemous, i.e. bummy!!!
I understand the thrill of a hood exit especially on a car like that. I think what would fit the whole feel of the build better would be a super clean fender exit. You could use a bypass valve that opens the fender exit for WOT and make the car more daily able and not have fumes in the cabin while cruising
@joemaggio6806 I'm not a fan of fender exits neither but yeah, a vavle system sounds legit! I never been a fan of anything other than an actual exhaust system for ANY type of setup. Hood and fender exits are just plain bummy and looks lazy imho. I've seen some cool exits in drag spec cars but still not a fan whatsoever!
@@rj5485 I totally get it. It takes a certain car to be able to rock anything but a plain old exhaust. Seems like the man has made up his mind on this setup though. Maybe he'll see this and go with the cutout/valve since he built that whole nice exhaust that's headed for the bin haha
Should I get the haltech 1500 or 2500 for my evo 8? I'm just trying to hit 500hp chillin. Also, what else should I order with it to make sure my tuner has everything to make my car run flawless?
@@paulkersey6283 do you mean to say a base lancer won’t be available in junkyards in washington? because devin himself has found one every time he needed to get pieces that are compatible from a base lancer lol
oof rip my ears on the grinder.. I found a strip of velcro vs double sided tape was better incase it has to keep coming off vs a new peice of tape everytime
The we want finally a front-bumper button.
Altho it looks good without it too
Yes!! 💯
He’s built a really nice “OEM +” Evo (his own words). It looks like he was in an accident and didn’t replace the front bumper.
We need it!!!!!!!!!
Haltech Ecu set up looks clean AF 🔥🔥🔥🔥🔥🔥
I think maybe you should try and tackle learning how to make a base map for it. If anyone can do it, it would be you with your motto "if someone else can do it why can't i" but man sick car I've followed every single video ever since the start of the type R build and you are without a doubt doing stuff no other "car UA-camr" is doing. You're in you're own league man keep it up
Mat armstrong just enter the chat 😂
They have base maps for the 8 and 9 already. He would just need to set up a few sensor settings which doesn’t take long to figure out.
Good to see our Aussie made Haltech being used.
They do make a 52mm multifunctional gauge as well to replace the AEM wideband.
aka GaugeArt rebranded as Haltech, Innovative and Link
That ecu setup came out so clean
Haltech CAN Gauge. I have one in my 9, and it's great. I replaced all my gauges, and I have it mounted in the ashtray with a DI Fab 3D-printed holder.
Devin you should look at getting a can check gauge for the Evo! 👌😊
New ecu setup look Minty fresh!
Front bumper and tune let’s go!
You can use the metal part in the wiper blades to be able to pass the wires easily from the engine bay to the inside. Since it's flat it will go easily
i love having 2 videos to watch in a down, missed the one from yesterday
You've gotten really good at some of that fab stuff.
Been waiting for the front bumper to go
That set up is looking good Devin!
For the love of all that is holy, when the hell is the front bumper going on, I can’t bare the tension any more
Picking up a evo 9 with the elite 2500, never had a haltech or open sourced before I’m excited
Needs the front bumper to complete this awesome build and to complete the overall picture of the car.
Lets go.... yeah!! 💪👍👌💥💢💯 You should have left a little plastic on the lower right to mount the plate.
There's another rear crash bar that gives you more protection and more bracing on the lower part of the diffuser. I have it on my evo 8.
Looks amazing that mate.
He makes look easy. Looks good
Sometimes insread of using two sided tape, we will use velcro to mount stuff that might need to br removed. Its stong enough to hold my radar detector on my R1 @170+mph and its cleaner than wire ties
Not sure if anyone else watched this with headphones but the last 30 seconds of the video the sound was doing some funky cutting in and out
Hey Devin can you do a refresh of whats done to your bike in one of the coming videos? Looks clean af
finally... what you should've done from the start!
PLEASE READ DEVIN - Haltechs website has a section to download base maps for your car to start from, I'd highly suggest giving that a go and work up from there.
Damn I wish I had the brain for this. Nice job
Prolly too late but there’s a 3d printed mount online that’s cheap that puts it in the stock location, mount the wb1 to the back of it route the plug and play box into the shifter cable area. Mine came out clean no cutting
Buy an oscillating tool, it's amazing for plastic, and 10x less dangerous.
Long time no fast car and we need a sendddddd
Hey Devin. What camera do you use for most your footage. im looking to upgrade from the iphone 13 pro max. thanks brother!
You should get the haltech canbus gauge.
Don't know why it was said that the 8 ecu is bad. When flash with tephramod, they are very capable. Obviously, a haltech is better, but the stock ecu isn't bad as stated.
love the build. Curious why is the door for your cabin air filter cut out behind the glove box?
top man. eu colocaria uma FUELTCH UMA FT 600 ai nesse EVO ia ficar show
Does the Evo have spats, aka factory mud guards (NOT FLAPS - EWWW)?
Great video , informational
At 3:07, my man is driving an Evo and gives the Subaru (✌️) wave... lol guess we now know where Devin's heart lies jkjk lol 🤣
I saw a mustang
@@nhelcarreon574yeah, the person in the white mustang didn't give Devin the Subaru wave, Devin gave the peace sign to him lol
@@xxaintweapairxx😂😂
Curious if the ECU could have been tucked under passenger seat
You would have to extend the wiring harness
It would look nice power coated
Now we just wait for the toooooooooner
why not put the haltech dash in the glove box?
as you have developed, I won't be surprised if you have a rolling country road and map the car yourself.
Hay Devin would like to know your thoughts on the supposed new Lancer Evo 11
What are you waiting on to get the front end together
Side note, I'd say get a pro fab hood dump setup on the Type R (if you must do a hood dump, which is highly ill-advised UGH). The current one is blasphemous, i.e. bummy!!!
I understand the thrill of a hood exit especially on a car like that. I think what would fit the whole feel of the build better would be a super clean fender exit. You could use a bypass valve that opens the fender exit for WOT and make the car more daily able and not have fumes in the cabin while cruising
@joemaggio6806 I'm not a fan of fender exits neither but yeah, a vavle system sounds legit! I never been a fan of anything other than an actual exhaust system for ANY type of setup. Hood and fender exits are just plain bummy and looks lazy imho. I've seen some cool exits in drag spec cars but still not a fan whatsoever!
@@rj5485 I totally get it. It takes a certain car to be able to rock anything but a plain old exhaust. Seems like the man has made up his mind on this setup though. Maybe he'll see this and go with the cutout/valve since he built that whole nice exhaust that's headed for the bin haha
What’s up with the hood vent ? It’s driving me crazy
Devin please give the EVO 4 a little bit of air in the Tyres 🥺
💛 🖤 are 🔥🔥
Should I get the haltech 1500 or 2500 for my evo 8? I'm just trying to hit 500hp chillin. Also, what else should I order with it to make sure my tuner has everything to make my car run flawless?
Let’s see Devin learns how to toonnnnnn
snap i was just thinking that plate needs to be black
❤
Awsome
Nice 🙂
Very nice...
What are the dimensions of the plate
Bro command strips would work wonders in your life instead of double sided tape and zip ties!
Bout to ship my evo X to you and have you build it 😩
whats up with audio? last 3 episodes my right ear was not rly pleased ....
You need to turn your brightness in your videos up more devin
Very nice,😎😎😎👍👍👍
get a lancer glovebox from the junkyard so you can cut one up without feeling too guilty
@@paulkersey6283 he tore the trunk interior and sunroof out of a base lander what do you mean lol
@@paulkersey6283 do you mean to say a base lancer won’t be available in junkyards in washington? because devin himself has found one every time he needed to get pieces that are compatible from a base lancer lol
@@paulkersey6283 and i’m saying lancer… not a lancer evo, i drive one, i know how common they are 😂😂
Adam LZ is looking for a cheap ish Subaru
You need a shop cat.
Why this radio....Amazing build but these radio uff
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
oof rip my ears on the grinder.. I found a strip of velcro vs double sided tape was better incase it has to keep coming off vs a new peice of tape everytime
This car needs the front bumper lol
sorry could not watch you cut that dash
Why in the world do you say the word Cure like that? 🤢😂
UU
Read mi mind 😂
The Evo is slowly losing its OEMness
"Smoke him"