I thought the install would be pretty straight forward and found your video just before I set out to do this on my own. I am so glad I took the extra few minutes to watch this as you no doubt saved me hours of heartache. This was exactly what I needed! Thank you!
Excellent video, convinced me to buy this unit and install it ourselves into a 2008 Cayman replacing the original CDR24 with the Bose package. Good attention to detail, especially about those side spring tabs. We found that plugging the FM antenna wire directly into the top antenna connector, and not using the fiber (yellow + black) connector at all yielded better FM reception. Thank you !
Great video. Wish this was up when I installed mine last year. Mine suddenly stopped turning off with the car. I found your video to review the process and never knew there was a PCCM+ set up function. I hit that and all is good again!
Thank you so much for this video! So many useful tidbits. I especially appreciated the bits about the spring tabs needing to be inside when installing the side panels, and near then end when you showed where the FM loop was - I would have never found that on my own. And that was the only thing that needed to be done with the subwoofer removed. I don't remember you showing where the optical loop goes, but I found that it is necessary for removing the old "tooki" bluetooth box in the dash... I was originally thinking it would go in the boot with the CD navigation drive, but no... nothing needs to be done up front for this install. Thank again!
Great video! Very comprehensive. One upgrade I did to my microphone installation is I ordered from Enfig Car Stereo a Porsche 997 microphone that allows the microphone, all be it with some small modifications, to be installed under the housing of the steering column instead of on top as originally instructed for the PCCM+. Ideally, Enfig could manufacture the small housing needed to clip into the factory placement on its own, but in the meantime, spending an extra $50 bucks is worth it for the factory placement upgrade. Not sure why Porsche did not figure this out in the first place.
I did the same install on my 987 (with Bose) yesterday and it all went smoothly. The CD changer has power but no longer seems to function. The only differences I noticed are that there is no where to plug the yellow digital FM cord into the car, so it hangs loose behind the unit. Also, FM reception works well like this and the FM bypass is not required either. The unit sounds great and integrates like a factory unit into the system, making it seem like a new car!
That's great feedback!! I did the bypass as I assumed the reception would be hindered by the legacy antenna booster, but maybe it wouldn't matter?! No programming was needed and although I don't have the cd changer, I believe there was an additional bypass / loopback wire that may need to be put in place behind the CD changer up in the hood.
I noticed that later as well and i went back and regenerated it fixed, BUT... then i was told that if i replaced the vid with a new one any links to it would be lost. So I just left it as a special Easter egg :)
Correction for the subwoofer removal. There is a T30 screw holding the subwoofer but it seems like whoever else removed it last time on your car didn’t screw it back. The 3 prong plastic piece on top of the subwoofer comes up if you just pull it with your hand which opens the screw/hole.
yes you are correct! I noticed that when I was reinstalling it but was to late to re-record. it should have had s small screw under the pop out grill on the woofer. I assembled it the way it should have been origionally! Good catch!
This video clarifies and expands on the install procedure described on the Rennsport website, and makes more sense of it. The install can be frustrating without instructions (by Porsche design). As you note near the end of the video, to properly remove the BOSE subwoofer on the passenger side of the console tunnel: first gently remove the small grilled air vent (on it’s middle bottom is a tab to depress and remove) this allows access to a previously hidden torx bolt that holds on the vent/grill housing. Second, remove that plastic grill housing, allowing access to a larger Torx 30 (with a washer) securing the actual subwoofer to the console. Loosen or remove that T30, and THEN pull the subwoofer toward the rear of the car to continue with head unit removal. 👍🏼
Totally agree and appreciate the additional info! Mine did not have the secure screw in place when I took it off, but i put one in when i reassembled to it would be correctly secured. Thanks again
Fantastic video! Thank you so much for posting. Now I’ll just have to see how to take apart the DVD navigation unit in the frunk to put the orange bypass loop on it. Also, did you disconnect the battery or was everything ok during the install with it still connected?
Thanks for posting this video. I have been told that the radio reception on the PCCM Plus is not as good as that provided by the original unit. Have you found that to be the case?
I think it is just as good, I believe.... that if you forget to bypass the power antenna in the passenger leg compartment it will have terrible radio reception.
Just put my order in. I’m watching all the PCCM utube videos. Can I have a back-up cam and dash cam added ? I think the dash cam is a separate independent system ?
The main screen is bnw and i didnt see options for colors, however.... i didnt explore the secret menu to much so there could be something there. with that being said, when I play MP#s from the usb all the song icons are color, so it must support color.
Just a reply, I checked and was told that the main screen is grey to match the other "grey" lighting numbers and digits on the gauges. I guess I can buy that, but I agree, its strange that the sub menus are in color. If i discover anything in the Developers menu or otherwise ill post here.
Great explanation compared to others. I've subscribed. I have a few questions: 1) Was any radio code supplied and any programming needed? I have Cayman 2006 with Bose. 2) Have you had any issues with the unit not turning off. There are some forum people with that issue? Thanks
There wasn't any codes needed to turn on and I just did a normal station channel scan and hit save ( super simple ). After a few months now with the new PCCM I would say that my only complaint is, that the radio turns on every time I start the car. So if you hold in the power button and turn it fully off, it turns back on when you restart the car the next time. I would think that it should stay off if you turn it off until you turn it on again.... interesting... Dealership says this is normal behavior. its a small complaint though
Thanks.Have you seen the volume issues some are having with Carplay function. Did you leave battery connected throughout your install? My PCCM + is backordered@@MNToolBox
I had PCCM Plus installed in my 2007 911 997 with a Bose Sound system, and I'm disappointed with the volume level, especially with CarPlay. It can't be compared to the old system. Does anyone know what might be causing this, or is it simply a fact that this PCCM Plus doesn't match the quality of the original system?
FYI - It looks like you missed 2 additional screws that hold the side mounts to the front. Each side mount has 2 screws in the side and 1 behind the faceplate. Took me a bit to find where the extra screws went. Looked back through this video that I had bookmarked and noticed it on your installation too.
Yes! I think that the previous owner had an XM radio installed and that whoever did the install left the screws off by accident. ( those darn extra parts after a job ). I did get the screws and put them on so it would be correct. Good catch!
My local Porsche Dealer says only Porsche can correctly do the installation; Is a PWIS required to activate any of th PSSM in a Boxster 987 ? And, should my local car stereo shop (. 30 years in business ) be capable of the installation ?
My dealership told me the same thing, that only they could do the install. I think it is the fastest $1,200 they could ever make. The new PCCM radio did not require any codes to turn on
Hi M, thanks for putting this up. I have the unit installed in my 997.1 by my local specialist. But noticed a slight delay / lag in response of the volume knob everytime I use Apple Carplay. It also resets the equalizer (bass/treble) by itself at random 😢. So this feels a bitch glitchy and beta. Have you noticed anything like this? Or anybody else with de 997 units?
I didn't really notice a delay in volume response but I will check again and perhaps others in the comment section might chime in. Mine turns on every time I start the car which is kind of a bummer annoyance. I am not sure if that is the same for others as well..... All in all though, it is a vast improvement!
Wish you would of shown how you removed the bose woofer panel. I know you said it's easy, but.... Can you tell me where the clips are at least. The panel must be removed or else I cannot get to the FM bypass process.
The woofer has a small grill at the top, this grill comes off and there is a screw behind it. then the woofer slides towards the back of the car. Mine had been remoded previously by the original owner so probably when the satellite radio was installed and the installer dd not put the screw back in, so my woofer just slid back and off the bracket. I realized the screw had been missing so I replaced it when I put the woofer back on, which also stopped a woofer rattle that annoyed me.
A few people asked that in the comments and I an not actually sure as I don't have a changer. One of the other comments said the changer didn't seem to function. I know there was an additional fiber loopback in the box, perhaps that needs to be installed up where the changer is ?! I would be curious to know if you find the answer!
Sorry to hear that, mine sounded substantially better, making the car so much more enjoyable to drive. Do you have an aftermarket amp or something installed?
Thanks for the great video! I have a 997 turbo that I want to upgrade. Has the bose system. Any issues with that? Yeah my local dealer wanted $2000 for install! Love how Porsche doesn't include any instructions on purpose 🙄
I thought the install would be pretty straight forward and found your video just before I set out to do this on my own. I am so glad I took the extra few minutes to watch this as you no doubt saved me hours of heartache. This was exactly what I needed! Thank you!
Love the video. It's easy to follow instructions, will do on all 15 of my Cayennes!
I miss the green spot, though!!
(Bring back the green spot)
Excellent video, convinced me to buy this unit and install it ourselves into a 2008 Cayman replacing the original CDR24 with the Bose package. Good attention to detail, especially about those side spring tabs. We found that plugging the FM antenna wire directly into the top antenna connector, and not using the fiber (yellow + black) connector at all yielded better FM reception. Thank you !
Great video. Wish this was up when I installed mine last year. Mine suddenly stopped turning off with the car. I found your video to review the process and never knew there was a PCCM+ set up function. I hit that and all is good again!
Glad it helped
Thank you so much for this video! So many useful tidbits. I especially appreciated the bits about the spring tabs needing to be inside when installing the side panels, and near then end when you showed where the FM loop was - I would have never found that on my own. And that was the only thing that needed to be done with the subwoofer removed.
I don't remember you showing where the optical loop goes, but I found that it is necessary for removing the old "tooki" bluetooth box in the dash... I was originally thinking it would go in the boot with the CD navigation drive, but no... nothing needs to be done up front for this install.
Thank again!
Thank you! Success installing on my 2006 997S. Could not have done it without your video!!!
Glad it helped, I appreciate the comment!!! Enjoy your radio!
Thanks for the great video. Can’t wait to try this on my car.
Awesome vid!!!! Miss the green spot, sad it hasn't appeared yet but hoping to see it's return soon!!!!
Best tutorial for the PCCM plus. Thank you ever so much
You're very welcome!
You are the best! Contemplating on upgrading and this video made the decision for me. Thank you so much for your efforts.
Glad I could help!
Great video! Very comprehensive. One upgrade I did to my microphone installation is I ordered from Enfig Car Stereo a Porsche 997 microphone that allows the microphone, all be it with some small modifications, to be installed under the housing of the steering column instead of on top as originally instructed for the PCCM+. Ideally, Enfig could manufacture the small housing needed to clip into the factory placement on its own, but in the meantime, spending an extra $50 bucks is worth it for the factory placement upgrade. Not sure why Porsche did not figure this out in the first place.
Is the jack 3.5MM for the PCCM plus? Think I'm going to order from Enfig
It was very helpful ! Thank you !
I hope it helps save some money
I did the same install on my 987 (with Bose) yesterday and it all went smoothly. The CD changer has power but no longer seems to function. The only differences I noticed are that there is no where to plug the yellow digital FM cord into the car, so it hangs loose behind the unit. Also, FM reception works well like this and the FM bypass is not required either. The unit sounds great and integrates like a factory unit into the system, making it seem like a new car!
was any programming needed. Thanks
That's great feedback!! I did the bypass as I assumed the reception would be hindered by the legacy antenna booster, but maybe it wouldn't matter?! No programming was needed and although I don't have the cd changer, I believe there was an additional bypass / loopback wire that may need to be put in place behind the CD changer up in the hood.
I love that you left the "Title Text Here" slide in the video 🤣🤣🤣 Seriously though, thanks for the informative video.
I noticed that later as well and i went back and regenerated it fixed, BUT... then i was told that if i replaced the vid with a new one any links to it would be lost. So I just left it as a special Easter egg :)
Correction for the subwoofer removal. There is a T30 screw holding the subwoofer but it seems like whoever else removed it last time on your car didn’t screw it back. The 3 prong plastic piece on top of the subwoofer comes up if you just pull it with your hand which opens the screw/hole.
yes you are correct! I noticed that when I was reinstalling it but was to late to re-record. it should have had s small screw under the pop out grill on the woofer. I assembled it the way it should have been origionally! Good catch!
Porsche Pasadena or Porshe South Bay, both in South Cal, may have a PCCM in stock.
I’m kinda glad for the delayed delivery; gives me more time to complete the back up cam installation on my ‘06 987
Got any thoughts on that instal ?
Would be helpful if Porsche provided starting guidance for developer mode MicVolume settings for different car configs such as cabriolet, etc.
If you have the DVD navigation you must put that loop in? My radio has no sound, I’m wondering if is because of the loop not being installed
This video clarifies and expands on the install procedure described on the Rennsport website, and makes more sense of it. The install can be frustrating without instructions (by Porsche design). As you note near the end of the video, to properly remove the BOSE subwoofer on the passenger side of the console tunnel: first gently remove the small grilled air vent (on it’s middle bottom is a tab to depress and remove) this allows access to a previously hidden torx bolt that holds on the vent/grill housing. Second, remove that plastic grill housing, allowing access to a larger Torx 30 (with a washer) securing the actual subwoofer to the console. Loosen or remove that T30, and THEN pull the subwoofer toward the rear of the car to continue with head unit removal. 👍🏼
Totally agree and appreciate the additional info! Mine did not have the secure screw in place when I took it off, but i put one in when i reassembled to it would be correctly secured. Thanks again
Fantastic video! Thank you so much for posting. Now I’ll just have to see how to take apart the DVD navigation unit in the frunk to put the orange bypass loop on it. Also, did you disconnect the battery or was everything ok during the install with it still connected?
I did not disconnect the battery, but someone may recommend it just in case.
Great video, thank you for sharing it. Did you put anything in the A-pillars? How long did it take you end to end?
The A pillars did not need to come off on the US models, to the best of my knowledge. Total time was 2 maybe 3 hours
Thanks for posting this video. I have been told that the radio reception on the PCCM Plus is not as good as that provided by the original unit. Have you found that to be the case?
I think it is just as good, I believe.... that if you forget to bypass the power antenna in the passenger leg compartment it will have terrible radio reception.
Just put my order in. I’m watching all the PCCM utube videos.
Can I have a back-up cam and dash cam added ? I think the dash cam is a separate independent system ?
My order backordered thru Suncoast Parts for my Cayman 06. Says late January on their website. Good luck
Great video!!! Love the attention to details. Is the main screen with all the icons really black and white? Is there not an option for color there?
The main screen is bnw and i didnt see options for colors, however.... i didnt explore the secret menu to much so there could be something there. with that being said, when I play MP#s from the usb all the song icons are color, so it must support color.
@@MNToolBox Cool, thanks for the info.
Just a reply, I checked and was told that the main screen is grey to match the other "grey" lighting numbers and digits on the gauges. I guess I can buy that, but I agree, its strange that the sub menus are in color. If i discover anything in the Developers menu or otherwise ill post here.
@@MNToolBox Thank you!
Great explanation compared to others. I've subscribed. I have a few questions: 1) Was any radio code supplied and any programming needed? I have Cayman 2006 with Bose. 2) Have you had any issues with the unit not turning off. There are some forum people with that issue? Thanks
There wasn't any codes needed to turn on and I just did a normal station channel scan and hit save ( super simple ). After a few months now with the new PCCM I would say that my only complaint is, that the radio turns on every time I start the car. So if you hold in the power button and turn it fully off, it turns back on when you restart the car the next time. I would think that it should stay off if you turn it off until you turn it on again.... interesting... Dealership says this is normal behavior. its a small complaint though
Thanks.Have you seen the volume issues some are having with Carplay function. Did you leave battery connected throughout your install? My PCCM + is backordered@@MNToolBox
I had PCCM Plus installed in my 2007 911 997 with a Bose Sound system, and I'm disappointed with the volume level, especially with CarPlay. It can't be compared to the old system. Does anyone know what might be causing this, or is it simply a fact that this PCCM Plus doesn't match the quality of the original system?
Great video! Question is Apple Car Play bluetooth or usb connect?
the carplay seems to be usb connect
FYI - It looks like you missed 2 additional screws that hold the side mounts to the front. Each side mount has 2 screws in the side and 1 behind the faceplate. Took me a bit to find where the extra screws went. Looked back through this video that I had bookmarked and noticed it on your installation too.
Yes! I think that the previous owner had an XM radio installed and that whoever did the install left the screws off by accident. ( those darn extra parts after a job ). I did get the screws and put them on so it would be correct. Good catch!
Great Video, Could we use the same system for 997 Gen 2 as well ?
I believe so
My local Porsche Dealer says only Porsche can correctly do the installation; Is a PWIS required to activate any of th PSSM in a Boxster 987 ?
And, should my local car stereo shop (. 30 years in business ) be capable of the installation ?
My dealership told me the same thing, that only they could do the install. I think it is the fastest $1,200 they could ever make. The new PCCM radio did not require any codes to turn on
how well does the gps work with if it's placed on top of the head unit like that?
Also interested in how the GPS module is working for you in that location.
It appears to be functioning just fine, if it acts up i would think it would be rerouted elsewhere fairly easily though.
Hi M, thanks for putting this up. I have the unit installed in my 997.1 by my local specialist. But noticed a slight delay / lag in response of the volume knob everytime I use Apple Carplay. It also resets the equalizer (bass/treble) by itself at random 😢. So this feels a bitch glitchy and beta. Have you noticed anything like this? Or anybody else with de 997 units?
I didn't really notice a delay in volume response but I will check again and perhaps others in the comment section might chime in. Mine turns on every time I start the car which is kind of a bummer annoyance. I am not sure if that is the same for others as well..... All in all though, it is a vast improvement!
Wish you would of shown how you removed the bose woofer panel. I know you said it's easy, but.... Can you tell me where the clips are at least. The panel must be removed or else I cannot get to the FM bypass process.
The woofer has a small grill at the top, this grill comes off and there is a screw behind it. then the woofer slides towards the back of the car. Mine had been remoded previously by the original owner so probably when the satellite radio was installed and the installer dd not put the screw back in, so my woofer just slid back and off the bracket. I realized the screw had been missing so I replaced it when I put the woofer back on, which also stopped a woofer rattle that annoyed me.
What happens to the factory DC changer with this installation? Will it continue to operate or can it be removed?
Make that "CD" changer...
A few people asked that in the comments and I an not actually sure as I don't have a changer. One of the other comments said the changer didn't seem to function. I know there was an additional fiber loopback in the box, perhaps that needs to be installed up where the changer is ?! I would be curious to know if you find the answer!
Does this work on the 997.2 generation?
There is a 997.2 specific version with the proper black trim
Does the factory cd changer still work?
This is a good question. I dont know about the CD changer operation, I will need to go test that when I get a chance.
13:57
Did you have the CD / DVD Changer?
I do not have a changer, it was removed before i purchased the car.
So does the reverse camera work?
I dont have a reverse camera on my car so sorry i cant answer that, maybe someone else here has one on their car that could answer that.
I do not know a single person with pccm who is able to successfully get a backup camera working. Kind of beats the point of installing a screen.
Doesn't sound great. Sound quality and volume sucks compared to the original system
Sorry to hear that, mine sounded substantially better, making the car so much more enjoyable to drive. Do you have an aftermarket amp or something installed?
Same problem with mine. Tulner volume is loud. Bt and carplay is very low volume. Looks like I'll need a new amplifier
@@MNToolBox all factory BOSE. plug and play...
@@jasonkoo5814 same exact problem. Tuner is loud. BT and car play sucks
Thanks for the great video! I have a 997 turbo that I want to upgrade. Has the bose system. Any issues with that? Yeah my local dealer wanted $2000 for install! Love how Porsche doesn't include any instructions on purpose 🙄
Thats 2000 you can now spend on gas, driving your beautiful car!!
Bastards