Overcoming Initial Challenges with the Yaesu FT -710
Вставка
- Опубліковано 16 кві 2024
- In this video, I’ll be taking you through the first steps of installing the FT-710 drivers onto your computer and showing you how to update your new rig’s firmware.
While doing this for myself, I ran into a few problems and a google search showed that I wasn’t the only person who experienced these troubles.
There was a lot of advice and information given, but after trying just about everything and experimenting with things… I found that a lot of the suggestions were not needed to resolve the issue, some of the info was just-plain-wrong, and some of the recommendations would do more harm than good.
In this video, I’ll be providing you and demonstrating what I found that actually corrects the problems.
Link to Yaesu.com, FT-710 downloads page: tinyurl.com/4yzutfzb
Chapters:
01:59 FT-710 Downloads
03:11 Installing the drivers
04:47 Updating the Firmware
12:37 Fixing the Problems
18:07 One Stupid Problem
Thanks for viewing. Please remember to Like, Share, and Comment. And please consider subscribing to this channel.
73 de Tom, ND3N - Розваги
Wow this was a lifesaver for me! I’m new and had the FT-710 and WSTJ-X on my MacBook… but unfortunately was limited by the unavailability of Mac ham software. Muddling through the driver issues reminded me why I left PCs for Mac years ago. I still hate Windows, but your video made a huge difference in getting things to work for me. Thanks for the amazing instructions!
You’re very welcome
I should have watched this before I did all mine. LOL! Might have saved a few headaches. Got it working though. Great video! 73
Glad it helped…. Btw, I replied to your previous reply re: Art Bell
Your videos are the best!, I would love for you to look at the little Xiegu G90.
Maybe someday. I’ve got about 60 videos before I look at it…
followed your steps, downloaded display first, after the download the radio turned off, turned the radio back on and it said to insert firmware sd card and download, it downloads and then the radio turns off, turn it back on and it said to insert sd firmware card error 001. It appears the memory in the radio has been wiped and it will not take the new firmware. Do have any ideas how to fix this?
Pull the SD card out then do a reset on the rig. Once reset, insert the SD card and format it. Then try to update the firmware again.
Very usefull video. For some constructive feedback, your audio levels vary from low to high between clips, if you would make them more constant it would make your videos easier to watch.
I had noticed that. I usually have my clip on wireless mic as my prime source, but I just went with my boom mic. Unfortunately, it is very directional, so if I move just a bit, the audio will be affected. Tried to fix in post processing, and really should have re-recorded everything, but like I mentioned, I’ve been under the weather…
@@ND3N Getting audio levels right in post isn't easy, hope you feel better soon.
I do appreciate the constructive criticism, though
How are you addressing the 710 issue where it doesn't store power levels for specific modes. For example, if on DATA-U you set the power to 40W then switch to USB and set the power to 100W then switch back to DATA-U the power is still 100W. On the 991a the power level for each mode is stored.
I suspect that is because of the band stacking schema used for the rigs…. But I’m not sure. Will do some research and do a video about what I find….
"My new Yaesu FT-710" @ 0:23 🤔🤭
Oops…. To be fair, I’m still under the weather and at a glance they kind of look the same
@@ND3N I saw this at the beginning and thought it was going to be a spoof about how to fix Yaesu's buggy firmware by installing Icom firmware instead... now that would have made for a hilarious video! lol
I think I'm almost there with the Yahzoo 710. Can copy stations but they don't seem to hear me. When you went to system-sound-properties...
Are you using windows 11 or 10? I'm using 10. That may be my problem of getting a screen like the one I mentioned here. Anyway, it's been a real pain in the butt but I'm getting closer but yet to make my 1st contact. Yesterday I went for 7 hours debugging things and watching videos. Kept changing the configurations till I FINALLY GOT a green button. Got to be a better way to do this.
I’m using windows 11, but the process is the same as on Windows 10. You did say that you were successful with FT8, but not with FT4? Because FT4 is a shorter waveform, 7.5 seconds vs. ft8 at 15 seconds, timing is more critical… so make sure your time is synchronized. Also, put your meter in ALC and make sure something is showing there. You want to see a deflection of 1/3 to 1/2 of the ALC scale - below that you’re not putting out a strong signal and above it you’re signal is starting to get distorted. I’m going to fire up my 710 and will take a few screenshots of my FT4 setup (though, as mentioned before, if FT8 works then FT4 should be working.
@@ND3N Many thanks for the reply. I'm not getting any deflection of the ALC. I tried PO but still nothing. I am seeing all the calls and everything else coming into the radio and FT8. BUT I've not been able to connect to a single station. Spent most of the day reading the 701 manual and another one I got on Amazon.
It looks like everything is working but I don't detect anything outgoing which could be the reason no one has connected to me. Very frustrating!!!!