I was about to say "How I wish I knew what screw goes where.". Only parts I dare cleaning are the feet dog, the bobbin case, and the wheel. Less than 10 screws to worry about.
That’s such a good sound. I used to fall asleep to the sound of mom sewing on the Pfaff 360. I don’t think mine came with the gray base plate. Interesting.
Thank you for the comments! Yes, the sound of a well tuned sewing machine is hard to beat. How nice to have a memory of your mother attached to the sound of a Pfaff. Thanks for sharing!
I use painters masking tape for marking the areas I want/ need to keep track of and yoghurt cups for the various accouterments that go with each machine
Myself, I replace the screws back into the holes they came out of as soon as possible. Just threaded in a few turns. Or stuck into the assembly they belong to, where they belong.
Thank you! This was great and helpful as I'm a sewing machine newbie and I just inherited a Pfaff 360. I do have a question if you are willing. At 16:33, just before you've put the needle plate back on, I see that there is an empty screw hole, just to the right of the feed dog plate, toward the front of the machine. On mine, there's a screw in that hole but I can't figure out why, or what it does. I took the screw out during cleaning and dutifully returned it to original location, but it isn't holding anything and seeing yours without the screw makes me wonder what it's for!
Lol. Ya I forgot to return that screw until after filming. I figured out that I had an extra screw later in the day and installed it. Not sure that I remember what it was for but probably good to have it installed. Good luck with your machine. Thanks for watching!
You did a great job cleaning her up and reassembling! What a nice find! Do you or your wife have any videos on the multi-machine wall hanging above your work area? That's so cool!
Thank you so much! I really appreciate the positive feedback. It was a really lucky thrift store find indeed :) Thank you also for asking about my wall hanging. Unfortunately, I did not record making it. When I started this channel I needed a backdrop and Stacey convinced me to try my hand at applique instead of buying a piece of art for the wall. I just kind of made it up as I went along. I cut out the machines on our Cricut machine and basically made a 7 foot table runner out of it. I am not a very confident sewer, but I am really lucky to have such a supportive wife that patiently teaches me along the way :) Thanks for the comment and thank you for watching!
@@NeverTooMany2023 Wow! I am even more impressed now that I know the wall hanging is an "original." It's really special! I'd love to see some close-ups and hear more about it in a future video if you're inclined, and if you ever decide to make a "kit" of the just the machines, I'd be first in line to buy it. Seriously. Hey, could even fund your next thrift find. :-)
Thank you for making the video! I bought a sewing table and they gave me this machine too, so useful to find out how to clean and fix it. I am having some trouble with the dials still - they're not turning and are very stiff. Is there a way to fix these?
Thanks you so much! The dials get stiff because the old lubricants get gummy. If you can (carefully) remove them, or get to the backside of them, you can clean the mechanisms and apply sewing machine oil to them. Gently work them back and forth until they free up. Careful because the knobs break and are hard to find.
I have the same machine but the problem is that it only sews in a zigzag, and I am looking for the straight line or is the problem. Please answer? THANKS
It sounds like your knob that controls the zig zag width is gummed up or broken. If you remove the lid you should be able to see the mechanism trying to switch between straight and zigzag. It might just need cleaned and oiled.
Quick question - does the sewing hook on your machine spin freely? On all the machines I've encountered the hook is locked in place and can only be moved by turning the flywheel. However on my newly acquired Pfaff 362, I can spin it freely by hand at the bobbin area. I have a problem that I'm trying to resolved and think that this maybe the cause. Unfortunately I don't have another machine to compare. Thanks
Thanks for the question. To my knowledge, all hooks should be locked in place unless you are turning the main gears. The bobbin case, as well, should be locked in place. If either the hook assembly or the bobbin case in spinning freely, your machine will not operate properly. I would take apart the hook assembly and re-install correctly. Hopefully it was just put together wrong and you do not have anything broken. Good luck!
There is a service manual for a Pfaff 360 (which is what I have) on a page I can't mention by name. It starts with Ar and ends with chive. You can get a PDF there. Just do an internet search for Pfaff 360 service manual and it should come up. I didn't see one for the 362, but they aren't that much different. Good luck!
Your timing belt has come adrift, I'm sorry to say. That said, it's a pretty easy job to put it back on. The trick is to put it back on so it's in time correctly.
@@theprojectproject01 It turned out to be that the finger was not engaging properly with the sewing hook. All is good now. Made the adjustment and gave it a .7mm gap. Thanks
Burning smells from a sewing machine can vary from built-up dust on the motor brushes to failing electrical components in the power supply system and/or the wiring itself. I would make sure to isolate the origin of the burning smell before using.
Thanks for the questions. As far as your needle hitting the bobbin case...this being a zigzag machine, I would make sure your needle position lever is not stuck or sticking in the wrong position. After that I would look at the timing of your hook assembly to make sure your needle and hook are interacting properly. As far as your foot pedal goes...not sure if your pedal has carbon stacks or if it is electronically controlled, but either way I would take the cover off and isolate where the sparks are coming from. Sparks are caused by current jumping from one source to another. If that other source is carbon build-up, then you can clean and re-assemble. Hope this helps. Thanks for watching.
Sehr gutes Video. Ich habe selber eine 362. Bei guter Pflege halten die alten Pfaff Nähmaschinen ewig.
Alles Gute und viel Spaß weiterhin mit der 360.
Danke mein Freund! Danke fürs zuschauen!
That was really fun to watch. There's no sound quite like a vintage machine purring along.
Thank you so much! It was really fun to make as well. What an amazing machine :) It purrs indeed. Thanks for watching and following along with us!
Glad you are able to fix those older machines up and running. Thanks you for the video
Thank you so much! So many machines...So little time :) Thanks for watching
Sai molto bravo
Thank you so much. Thank you for watching!
Wow it’s a brand new sewing machine. My mom as the exact same one :) and she loves it !
Thank you so much! It really did clean up nicely :) We can't wait to start using it. Thanks for watching!
Great video, I enjoyed watching it, I have a similar 362 which is a fantastic machine to use.
Thank you so much! I am glad that you enjoyed it. That is great that you have the same machine. I am sure that you love it. Thanks for watching!
Anytime theres not a bunch of screws or important stuff left out, is a good job...lol
Lol. That is for sure. I always seem to have at least one screw left over :)
I was about to say "How I wish I knew what screw goes where.". Only parts I dare cleaning are the feet dog, the bobbin case, and the wheel. Less than 10 screws to worry about.
Nice job!
Thank you so much!
Very cool!
Thank you so much! Thank you for watching!
That’s such a good sound. I used to fall asleep to the sound of mom sewing on the Pfaff 360. I don’t think mine came with the gray base plate. Interesting.
Thank you for the comments! Yes, the sound of a well tuned sewing machine is hard to beat. How nice to have a memory of your mother attached to the sound of a Pfaff. Thanks for sharing!
I use painters masking tape for marking the areas I want/ need to keep track of and yoghurt cups for the various accouterments that go with each machine
That sounds like a great system. The more organized the better, I say :) Thanks for the tips and thank you for watching!
Myself, I replace the screws back into the holes they came out of as soon as possible. Just threaded in a few turns. Or stuck into the assembly they belong to, where they belong.
Cute dog.
Thanks. Ya, he's the boss :)
Thank you! This was great and helpful as I'm a sewing machine newbie and I just inherited a Pfaff 360. I do have a question if you are willing. At 16:33, just before you've put the needle plate back on, I see that there is an empty screw hole, just to the right of the feed dog plate, toward the front of the machine. On mine, there's a screw in that hole but I can't figure out why, or what it does. I took the screw out during cleaning and dutifully returned it to original location, but it isn't holding anything and seeing yours without the screw makes me wonder what it's for!
Lol. Ya I forgot to return that screw until after filming. I figured out that I had an extra screw later in the day and installed it. Not sure that I remember what it was for but probably good to have it installed. Good luck with your machine. Thanks for watching!
You did a great job cleaning her up and reassembling! What a nice find! Do you or your wife have any videos on the multi-machine wall hanging above your work area? That's so cool!
Thank you so much! I really appreciate the positive feedback. It was a really lucky thrift store find indeed :) Thank you also for asking about my wall hanging. Unfortunately, I did not record making it. When I started this channel I needed a backdrop and Stacey convinced me to try my hand at applique instead of buying a piece of art for the wall. I just kind of made it up as I went along. I cut out the machines on our Cricut machine and basically made a 7 foot table runner out of it. I am not a very confident sewer, but I am really lucky to have such a supportive wife that patiently teaches me along the way :) Thanks for the comment and thank you for watching!
@@NeverTooMany2023 Wow! I am even more impressed now that I know the wall hanging is an "original." It's really special! I'd love to see some close-ups and hear more about it in a future video if you're inclined, and if you ever decide to make a "kit" of the just the machines, I'd be first in line to buy it. Seriously. Hey, could even fund your next thrift find. :-)
That's great. Thank you so much!
Thanks for the video! I think you forgot one screw under the needle plate.
Lol...Indeed I did :) Good eye! I caught that after the fact and through the process of movie magic it went un-noticed...until now. You win :)
Thank you for making the video! I bought a sewing table and they gave me this machine too, so useful to find out how to clean and fix it. I am having some trouble with the dials still - they're not turning and are very stiff. Is there a way to fix these?
Thanks you so much! The dials get stiff because the old lubricants get gummy. If you can (carefully) remove them, or get to the backside of them, you can clean the mechanisms and apply sewing machine oil to them. Gently work them back and forth until they free up. Careful because the knobs break and are hard to find.
Great! I will try this, thanks so much! 😊
I have the same machine but the problem is that it only sews in a zigzag, and I am looking for the straight line or is the problem. Please answer? THANKS
It sounds like your knob that controls the zig zag width is gummed up or broken. If you remove the lid you should be able to see the mechanism trying to switch between straight and zigzag. It might just need cleaned and oiled.
Quick question - does the sewing hook on your machine spin freely? On all the machines I've encountered the hook is locked in place and can only be moved by turning the flywheel. However on my newly acquired Pfaff 362, I can spin it freely by hand at the bobbin area. I have a problem that I'm trying to resolved and think that this maybe the cause. Unfortunately I don't have another machine to compare. Thanks
Thanks for the question. To my knowledge, all hooks should be locked in place unless you are turning the main gears. The bobbin case, as well, should be locked in place. If either the hook assembly or the bobbin case in spinning freely, your machine will not operate properly. I would take apart the hook assembly and re-install correctly. Hopefully it was just put together wrong and you do not have anything broken. Good luck!
@@NeverTooMany2023 Thanks for the info. Now I just need a service manual and roll my sleeve up.
There is a service manual for a Pfaff 360 (which is what I have) on a page I can't mention by name. It starts with Ar and ends with chive. You can get a PDF there. Just do an internet search for Pfaff 360 service manual and it should come up. I didn't see one for the 362, but they aren't that much different. Good luck!
Your timing belt has come adrift, I'm sorry to say. That said, it's a pretty easy job to put it back on. The trick is to put it back on so it's in time correctly.
@@theprojectproject01 It turned out to be that the finger was not engaging properly with the sewing hook. All is good now. Made the adjustment and gave it a .7mm gap. Thanks
Tengo una máquina de esa las correas se dañaron y no he encontrado
Muy bien. Lo siento.
Pls, what causes burning smell in pfaff 360
Burning smells from a sewing machine can vary from built-up dust on the motor brushes to failing electrical components in the power supply system and/or the wiring itself. I would make sure to isolate the origin of the burning smell before using.
@@NeverTooMany2023 Thank you
Molim vas znate li godinu proizvodnje PFAFA 362 , jako me interesuje ???
1961 or 1962?
Hi I’ve got a Pfaff 91 and the needle hits the bobbin case also I can see slight sparking when I push foot pedal any ideas? Thanks claire
Thanks for the questions. As far as your needle hitting the bobbin case...this being a zigzag machine, I would make sure your needle position lever is not stuck or sticking in the wrong position. After that I would look at the timing of your hook assembly to make sure your needle and hook are interacting properly. As far as your foot pedal goes...not sure if your pedal has carbon stacks or if it is electronically controlled, but either way I would take the cover off and isolate where the sparks are coming from. Sparks are caused by current jumping from one source to another. If that other source is carbon build-up, then you can clean and re-assemble. Hope this helps. Thanks for watching.