Gigabyte RTX 3080 TURBO 10G | Thermal Pads Replacement - Fix RTX 3080 Memory Temperatures for Mining
Вставка
- Опубліковано 28 вер 2021
- Gigabyte RTX 3080 TURBO
------------------------------------------------------------------------
SUBSCRIBE: / @nvph123
THANK YOU FOR VIEWING THE VIDEO. YOU NEED SUPPORT OR QUESTIONS CAN COMMENT BELOW OR SEND A MESSAGE TO THE CHANNEL! SUBSCRIBE CHANNELS TO UPDATE THE TIPS, TUTORIAL, TEST, REVIEW MACBOOK, MACOS, ANDROID, IOS, SMARTPHONE,...
#3080turbo #3080ThermalPads #3080Mining - Наука та технологія
Thank you for this video! I did it exactly as described and my card is performing much better now. To everybody who is confused about all the comments whether using 1mm or 1.5mm pads: If your card is the Gigabyte 3080 10G Turbo Edition, 1.5mm pads won‘t work - i tried it. You need 1mm pads on all locations. 1.5mm pads are too thick (on RAMs also) and you could damage your card using them. You also do not have too think about whether buying Gelid Extreme or Ultimate. Instead buy them from Arctic. They are way cheaper and probably as good as the Gelid. I bought the 10 by 10cm pad. One pad is enough for this card. And don‘t forget about the thermal paste for the GPU. Be aware that you place the pads exactly where the guy in the video does - not more not less. There are other components on the card which don‘t need the pads - that‘s important!
Thank you for your comments, what temperature do you get in hotspot? and for the Vram?
The big question is, will the card be suitable for a desktop PC when it comes to fan noise after the mod?
@@Thiesi bro rly noise is the problem for a guy whit a headset 90% of the time when the gpu is going at it???
@@gamerulrafihd55 Who would that be?
67 degrees are ok is not at all a worrying temperature, thanks a lot for the video I have a 3090 Turbo for gaming previously used for mining and the video was very useful for doing a needed maintenance (not very clean environment where it was used previously)
for core temperature, possibly front pads (on memory modules) are to thick, pushing core away from cooler, maybe try 0,5mm less
what's with all the flys crawling everywhere?
Hi, could please help me with Asus Turbo RTX 3090 thermal pad sizes front and back. I am looking for the thickness everywhere and not getting anything. Also, strangely at Asus site Turbo RTX 3090 is not mentioned, neither at support site. Kindly help please :(
Is there any way that i can make this card better? I have the exact same model.
Temps are ok, But for gaming it's so loud.
Can I change the heatsink of it? I can't find water blocks in my country for this model.
i got 3090 and god is sooo loud
I recommend trying it out phase-change material Honeywell PTM7950. It comes in as a sheet, lasts longer, performs works better than traditional pastes and there is no pump-out effect. Instead of thermal pads, I advise to apply thermal putty Upsiren UX Pro. It is also a good idea to do undervolting.
How many temperatures before install thermal pad ?
No links to the products used?
At the start of the video you showed 1.5mm pads then it says you used 1mm, which is it?
Hi guys, I switched a case, it is the same manufacturer (SilentiumPC), but full frontal intake, it is pure magic. 10 degrees down on radiator, CPU and 3080 turbo. Now I'm getting 75 deg C at 100 MH/s mining.
Hello, my friend! I'm very interested on this! I'm just going to buy 2 RTX 3090 with this Turbo Model.
How do I find this case? do you recommend me to change these pads?
Asus rtx 3090 turbo thermal pad size???
Lol that 67°C is soo good not sure why there might be any worries. The blower style fan has a purpose and that's to ramp up to high RPM (loudness isn't a factor its natural to the design) to cool down the card. It's a hotter and louder card. Keep the heatsync clean and make sure the case and fan setup allows for a positive airflow design. If this is in an aircon environment take into consideration condensation on the heatsync so keep it clean. Last thing you can do is undervolt the 825v mark to 1758mhz and it will have the card run 5-10°C cooler.
Main problem is VRAM temps, note GPU. I have 24GB version and its piece of shit. 105 C on VRAM on summer in opened case and 90% FAN speed. Crazy loud thing.
You need change only memory pads. 1,5 mm Gelid Ultimate (not Extreme) is thickness you need. 1 pcs 90x50 is all you need. 22C in room, 85% fan speed and memory temp is below 80C. Thanks and wish you happy mining.
You have turbo version too?
@@MarkThomasMorgan I talking about Turbo indeed.
Everybody suggests different model of Gelid. Your suggestion is Gelid Ultimate. @SuperSuperka suggests Gelid Extreme. Which one is the best one? I really confused. I bought Geld Extreme 1.5 mm but it doesn't work totally useless . Now I'm gonna buy ultimate model. But I ain't got hope!
@@sportspeople7811 Ultimate is high-end. Highest conductivity (15W vs 12W) from gelid thermalpads.
@@sportspeople7811 difference between them is 4 degrees max. If it doesn't work you need thicker pads
Hi bro, pls let me know which heatsink u r using n it would be great if u provide the buying link for the same..?
looks like generic heatsinks from aliexpress
If you decided to change the pads, I highly recommend you to use 1.5 mm on the RAM chips (around the GPU).
My card's temperatures were awful: 85 (GPU), 104 (memory), 106 (hot spot).
I tried 1 mm pads and the memory's temperature didn't change (104 C⁰ max), but after that I tried 1.5 mm (Iceberg Thermal DRIFTIce, tha same brand as for 1 mm) and the memory's temperature dropped down to 90 C⁰ max. With power limited mode (90%) in MSI afterburner now the temps are: 63 (GPU), 80 (memory), 82 (hot spot).
I use my card for 3d rendering and with power limited mode the card has better performance than without any limits 🤷🏼♂️
so 1.5mm on just the ram, or all around?
@@ammamar4269 I used 1.5 mm for RAM and 1 mm for others
not just 1,5mm, but Gelid extreme, not Ultimate. The clearense there is 1mm exactly. Ultimate are not soft enough, extreme - are.
Thanks for the recommendations gents. Going to change the pads on a 3090 turbo I picked up as it sounds like a leaf blower when stressed. lol.
Instead of thermal pads, I advise you to apply thermal putty Upsiren UX Pro. You won't have to worry about thickness, and the performance of this thermal putty is better than most thermal pads on the market.
And try phase-change material Honeywell PTM7950. It comes in as a sheet, lasts longer, performs works better than traditional pastes and there is no pump-out effect.
It is also a good idea to do undervolting.
서멀패드 몇mm짜리 사용하신건가요??
Everyone suggests a different model of Gelid. Someone says Gelid Ultimate is the optimal choice. Another recommends Gelid Extreme. Which one is the best? I'm really confused. I bought Geld Extreme 1.5mm but it doesn't work. Totally useless. My 3080 is still turning itself off quickly. Now I'll try the gelid ultimate model. But I ain't got hope!
1.5mm is too thick for the RAM, you need 1.0mm on a RTX 3080 10GB Turbo Rev 2 (as shown in the video)
szárnyas hangyák :D jó tiszta lehet a hely :D
Hi, I have the RTX 3090 Gigabyte Turbo edition.
In the GPU what measures should be used? 1.5mm or 1mm? I have read that some use 1.5 and others 1
And from the outside? Thanks
Did you figure out what size is best? I also have a 3090 turbo and can't find their size anywhere
hi i have too you have resolved?????
Only 1mm inside the 3090 Turbo, soft Gelid 12W (not 15W!)
Instead of thermal pads, I advise you to apply thermal putty Upsiren UX Pro. You won't have to worry about thickness, and the performance of this thermal putty is better than most thermal pads on the market.
And try phase-change material Honeywell PTM7950. It comes in as a sheet, lasts longer, performs works better than traditional pastes and there is no pump-out effect. It is also a good idea to do undervolting.
so vram/backplate is 1.5mm and the rest all 1mm
Still sounds like a jet engine?
I tried putting 1mm pads everywhere, but I guess my card has been deformed from previous too thick pads. Memory temps went off the chart after a few seconds of mining, so I had to put 1.5mm pads on the memory, the rest is 1mm. On the backplate, I also have 1.5mm pads. Tried to screw it back as tight as I possibly could. Works great so far.
the clearence is 1mm there. with 1mm pads you have risk of not touching. 1,5mm Gelid Extreme (they are soft) - just perfect, while Gelid Ultimate are bad.
@@SuperSuperka Вы использовали 1.5мм Gelid Extreme только на памяти или везде? А между бэкплейтом и текстолитом тоже их? Распишите, пожалуйста, если не трудно, какие и где прокладки вы использовали. Захожу каждую неделю на этот ролик в поисках новой информации, но все пишут по разному. И если не трудно, скажите, сколько вам удалось скинуть, точнее со сколько до скольки. Спасибо.
@@ultrawidesky я хотел "видеоурок" по этой видеокарте сделать, потому как снял на видео всё что делал с ней. Но некогда монтировать. Там зазор везде 1мм и между памятью и кулером и между всеми чипами также 1мм. Кроме одного ряда микросхем которые возле выводов HDMI, DP - там 0.6мм. Я испугался что с 1мм прокладками огребу некасание. Так что поступать надо предельно просто: 1.5мм Гелид Екстрим на всю видеокарту - я не помню 2 или 3 упаковки 80х40 использовал, и одну полоску Екстрим 1мм на ряд чипов у выводов. Под бекплейт у меня не помню какие - вроде ультимат 2мм, но они там только потому что я вначале их для видеокарты покупал и они не подошли - я чуть не спалил видеоядро с Ультимат.
Мне кажетя основной смысл прокладок под бекплейт обеспечивать распределение нагрузки от бекплейта на "материнку" видеокарты, а не в отводе тепла. Температуры упали - ну это не описать словами. Дело в том что потекшие "родные" уже совсем не работали и производительность составляла смешные 55-60 (при ограничении температуры памяти в 100) ну или 65 при температуре в 110. Всё это время центрифуга мотала на 100%. После модификации вентилятор на 80-90% и температура на памяти 92-96 в зависимости от комнатной. положенные 99 мощи. В максимуме до 101 пробовал, но она иногда грохалась.
А этот чувак на видео - он скорее пример того как не надо делать.
@@SuperSuperka Огромное спасибо за столь подробное описание, обязательно посмотрю ваш видеоурок, когда он выйдет)
Instead of thermal pads, I advise you to apply thermal putty Upsiren UX Pro. You won't have to worry about thickness, and the performance of this thermal putty is better than most thermal pads on the market.
And try phase-change material Honeywell PTM7950. It comes in as a sheet, lasts longer, performs works better than traditional pastes and there is no pump-out effect. It is also a good idea to do undervolting.
1.5mm or 1mm?
что-то мне подсказывает, что температура не сильно-то и изменилась
Want to know what number of Thermal Pads are you using?
Are they all 1mm thickness? No difference between on vram and power semiconductors?
the difference is not significant. It can be shared 1mm. You should not use thinner patches
@@NVPh123 The video shows 1.5mm on the package of gelidstore pad. Which is correct 1.0mm or 1.5mm?
@@feraskarim7108 i tried 1,5 mm and my card started to throttle, then i changed them to 1mm, now my card works perfectly. Thanks for the video!
@@feraskarim7108 1.0mm is true
@@timurdzh all pads were same size or different size of pads should be used. I mean I can only use 1mm everywhere , or I have to use 1mm on vram and 1.5mm on other place.
Oh man, you should have made this video 3 months ago! I spent ages on those thermal pads. First I tried 2mm. The card worked, but I hardly closed it and of course, the temps were ridiculous. Then I tried 1.5mm, which I am using until today. Performance and temps are much much better. God knows, what I can get out of it, if I start using 1mm pads :D
the softness is much more important then thikness. 1,5mm Gelid Extreme suits well, while 1,5mm Gelid Ultimate are bad.
Can you game on this card as well? Or is it only for mining?
ofc u can
can, I have one.
Thx from Russia!
is 3090 same also? whats the thickness you used?
you ever find out if 3090 is the same?
@@nmofield Also working on the same thing, how did the 1mm work for you? 2mm and 1.5mm and my hotspot temps are way too high, 105C+.
Hi guys, I'm also having a GB 3090 Turbo 24G. Any idea on the sizes of the pads in final? I afraid to open multiple times, especially the screw threads can go worn
@@engpratheep I did 1mm everywhere except the backplate, 2mm on backplate.
@@Briggsta thanks buddy . I didn't expect a quick reply. You may be a guy like me frustrated with the card lol. Today I tried with 1.5mm and today my workmanship also not good. Very dirty with cheap gpu core thermal paste also. And I was running out of material today since I bought only few small pieces of gelid because they are costly. Anyway, tomorrow I will buy 1mm and I hope it would success.
1,5 mm thermal pads bro!
*"you sound white, boy"*
lol
Yeah, you saw correctly, there is 3080 blowers!!!
Your oc is too high, F for this gpus
Another goddamn mining rig... Such a waste of a good graphics card.
Yo tengo esa placa y está en 55 y sin el cooler al 100% como está ahí, algo mal te quedó con ese cambio de thermal