Hey, nice review. I have the same microscope. Do you experience the following problem: When I try to take a pictures it is working fine. When I record a video it is working fine. But after the 1st video every file after that is corrupted. If I take a picture and then preview it on the microscope it is showing blank screen (same with video), if I connect the SD card to a computer, all images before 1st video (including the 1st video) is ok, but after that all files are shown as corrupted.
Well, I need tubing. I saw a lot of different sizes on spools at “”ACE HARDWARE”” back corner. Different sizes. I may go larger tubing then reducers near plants. From there have small pump per plant. Mostly gravity fed, not much work for small pump. Now I am searching for “best code already written for water sensor and for it to trip pump on /off. Still want small different color small wire spools and buy end pieces or solder them where connected. I gotta create water proof container for Arduino/breadboard and run wiring out/sealant around wire holes.
i bought it g1200 , and used it for a month , and i regret it , the image quality is very bad , it never gives good balance between light and dark areas , the light is refleced directly to the camera when working with cicuit boards or electronics repairs , cannot see the parts clearly and the colors is not clear too , cannot tell if there is some thing dicolored or burned , and after a month or so of usage , it died , it doesnt turn on , i opened it and tested the board , i found the circuit board to be shorting on the power area next to the charger port , and its poor design seems to have failed in short time because it generates lots of heat while it doesnt have and proper cooling , its one of the worst microscopes in the market and no matter what price you pay for it , doesnt worth it never buy this model , you will end up throwing it in trash
I'm really sorry about that. I've had mine since this video and use it all the time without issue. I don't have a problem focusing it either. Sorry you got a dud. Thanks for letting people know.
Good review! As you say it looks like a nice bit of kit!
Thank you! I use it almost daily.
Hey, nice review. I have the same microscope. Do you experience the following problem: When I try to take a pictures it is working fine. When I record a video it is working fine. But after the 1st video every file after that is corrupted. If I take a picture and then preview it on the microscope it is showing blank screen (same with video), if I connect the SD card to a computer, all images before 1st video (including the 1st video) is ok, but after that all files are shown as corrupted.
Hi. Sorry I missed your comment. I actually do all my video with my screen recording software. I don't use the built in features to do it.
This is awesome. I been using naked eyes to solder SMD 😂
Me too. And I'm getting a little old for that :)
@@AnotherMaker unfortunately I can't buy this from banggood and Amazon doesn't sell this. And I don't trust wish
@@HarshDethe i can give you sellers contact details if u wish
@@ishacare176 sure can you mail me contact@projecthub.in
omfg i was just about to order this
haha well consider using my link :P Thanks for watching!
@@AnotherMaker sure thing bro
What is a realistic working distance between the lens and the object?
For reasonable soldering etc the lense could be like 4-6 inches away.
Mine came in the same box , but instead of MUSTOOL printed above the LCD screen mine has MICROSCOPE instead ??
it's a Chinese counterpart it's literally 1 to 1 exact same hardware
it's a Chinese counterpart it's literally 1 to 1 exact same hardware 😊
I’m blind and need 1! SBC components r small. Plus I am starting my 1st Arduino project soon.
It's a really handy tool. You're going to love doing Arduino stuff.
Well, I need tubing. I saw a lot of different sizes on spools at “”ACE HARDWARE”” back corner. Different sizes. I may go larger tubing then reducers near plants. From there have small pump per plant. Mostly gravity fed, not much work for small pump. Now I am searching for “best code already written for water sensor and for it to trip pump on /off.
Still want small different color small wire spools and buy end pieces or solder them where connected.
I gotta create water proof container for Arduino/breadboard and run wiring out/sealant around wire holes.
Регулируемая штука )))))
Thanks for watching.
Very bad for battery replace methods. Not good.
Yeah. I would be fine removing the battery altogether. It's really not necessary to be there. I never use it on battery.
Supper battery. Lol
I know, right! I love the one side of tape.
@@AnotherMakerif this microscope is by cheap manufacturer from china, beware of the lithium poly battery. This may be your last supper.. 🙄😁😁😁
Highly nostalgic though. I really like your work. Can u make a review of Smart LED bulb with esp wifi module?
What? Only 100x magnification? Lol it really is just a toy. :D
Who would buy a microscope like that? Omg.
someone who does smd soldering without trying to buy a microscope that cost 500 bucks
@@SCYN0 thats not a microscope then. thats magnifying glass
i bought it g1200 , and used it for a month , and i regret it , the image quality is very bad , it never gives good balance between light and dark areas , the light is refleced directly to the camera when working with cicuit boards or electronics repairs , cannot see the parts clearly and the colors is not clear too , cannot tell if there is some thing dicolored or burned ,
and after a month or so of usage , it died , it doesnt turn on , i opened it and tested the board , i found the circuit board to be shorting on the power area next to the charger port , and its poor design seems to have failed in short time because it generates lots of heat while it doesnt have and proper cooling ,
its one of the worst microscopes in the market and no matter what price you pay for it , doesnt worth it
never buy this model , you will end up throwing it in trash
I'm really sorry about that. I've had mine since this video and use it all the time without issue. I don't have a problem focusing it either. Sorry you got a dud. Thanks for letting people know.