If you have to format hard drive but no backup, you can use 4DDiG to recover all your data bit.ly/45626na 🎉🎉🎉Get Christmas gift from 4DDiG here: bit.ly/3Tn1NBv
@@ZeUS-nr1qt Non initialized disk IS usually a hardware failure and can't do much unless you are a very technical person who can desolder eprom using hot gun and get the revelant chips online.
@@slickityragnarthegreat Actually the backup should only contain data e.g game data(save game), key code, reg. code, personal data, etc. Others (programs. games etc) can usually be redownloaded. I have dl thousands of movies and series over the years but i don't even watch 1/10 of them and the same also for the game i've download, I play only a few. In the end it just taking up spaces. Recently I delete tons of movie! Why? Because I found the movie I kept was only 480p or 720p while even youtube quality is better the mine. same as game quality where last time we play seem fine but now we find it patchy and crude.
literally everyone says: - this is the disk is giving an error, but the disk is not even showing, so how can i type for example "d:/r/d" if D doesnt even exists? It says 'invalid parameter - /d
*chkdsk* is designed to check and repair issues on already formatted and initialized disks. For an uninitialized disk, you need to initialize and format it first using tools like Disk Management in Windows or diskpart command before running chkdsk.
How do you know if there's now drive letter populated or if it was an old C drive and you already have a new c drive....these videos never seem to duplicate the actual problem entirely
So sorry for that! 😭 You can also check on disk manager, there will be a RAW drive if you don't assign the letter to Drive, you click on it, it will show you which Disk the RAW drive is located.
Warning to those who follow these steps, step 2 will format the whole drive. I found this out to late. My disc would have been saved if i did not follow these steps, now most of my data is lost.
I'm so sorry to hear that! Formatting hard drive is the last method that we can solve this problem. But it will erase all data from it, please make sure to back up all important data. If you unfortunately lose data, you can also try 4DDiG Data Recovery😭😭
The CLOWN also doesn't address that most unallocated drives in Disk management does NOT have an assigned Letter, and you can NOT add one! Pretty much a Clown show here!
@@selmonb921 Yep that's what I just commented about. How did he pick F: if in everyone's case it just shows Disk 2..etc? Mine is an old C: Drive M.2 I wanted to reuse and Ihave it in an external enclosure plugged in and getting this error. If I put C: drive since it was an old one I'd end up errasing my current C drive!
my drive isn't showing up in the this PC section. I tried to clean it and that worked but making partition it fails. and in the create and format hard disk partitions it says unknown not initialized when I try to initialize it says Request Failed Due to a Fatal Device Hardware Error
Excellent video Tenorshare! I follwed the instructions but it says "Diskpart has encountered an error: device is not ready". Any advice would be much appriciated...
"Something like this happened to my SSD. The SSD is not showing up on this PC or in the BIOS, but when I check in Device Manager, it shows up as an 'Unknown disk, uninitialized'. And when I try to initialize the SSD, it says 'A device which does not exist was specified'. Does anyone know how to fix this ?
Thanks for the video In my case, when i right (convert gpt) the message came : Diskpart has encountered an error :the request could not be performed because of an I/O device error See the system event log for mor information. 😢
Hi! You could try to format this volume(drive) on My PC. Right clicking it, select format, and choose the File System and Quick Format. Make sure to back up the data early if for any chance you can open the drive.
@@ka-batangangler5248 im looking everywhere to fix this dude I have no idea what to do. If I try to initialize it just says either fatal hardware error or Cyclic redundancy check error i have no idea what to do
DiskPart has encountered an error: The request failed due to a fatal device hardware error. See the System Event Log for more information. This msg coming i don't want to open the Hard Drive and its 1tb i don't want to throw also. any suggestion? and i am tired, i have lost 3Tb harddisk just because these problems.
i have 2TB external hard drive then all of the sudden my laptop cant detetct my hard drive and when i check it in disk management it shows not initialized, and when i try to initialize it the CRC error shows up., any idea on how to solve this problem.
@Tenorshare4DDiGDataRecovery I am still facing "The request failed due to fatal device Hardware error " please suggest not even External drive not showing on my computers
I had the same issue after 5 years since i bought my pc. just remove hard drive, unscrew bolts that are fixing small circuit board from back of hard drive and clean all pins and contacts where pins land. i've used an eraser and ears cotton stick and some alchool. After restart hard drive appeared again with all info's that were there
this is the error i get when using convert gpt = DiskPart has encountered an error: A device which does not exist was specified. See the System Event Log for more information.
Hi! You can try this method: To fix it, you can try to run the troubleshooter to fix hardware issues or directly uninstall the storage controller. Here, I’ll show you how to run troubleshooter. Step 1. Type Troubleshooter or Troubleshooting in the search box and select it from the list. Step 2. Under the Hardware and Sound link, click Configure a device. Step 3. Click Advanced and tick Apply repair automatically in the new window. Step 4. Click Next to start the pending operation and repair the issues it finds.
when i try to convert to gpt DISKPART> convert gpt DiskPart has encountered an error: Data error (cyclic redundancy check). See the System Event Log for more information. the disk is not initialized and not having a letter
@@iamdshiva1388 bro i get the solution actually ur hard disk is corrupted or dead so u need to buy a new hard disk coz we cant fix corrupter hard disks right??? trust me this is the only solution
Great tutorial couldn’t get chdsk to work though as it just says request could not be performed due to an I/O device error. I know eventually I’ll just go around in circles as I’m always sent here for something that won’t work
Un-plug your DVD drive and use those cables to plug in your HDD or SDD. Your PC should be able to actually read the hard drive. Once you do that. All this bull shit actually means something. 🤞🏾 Trust me on this one.
Hi! The drive is a part of the disk, for example, Disk 0 can be separated by C Drive and D Drive, even more you can also create a E drive for the rest of space in Disk 0, if there is an unallocated space. (My C drive is in Disk 1 though) I suppose Drive F is the removable disk, so you may recognize Drive F by checking whether the Drive F space is same as Disk 1 or 2 or 3 blablabla. And furthermore, inside the each Disk bar, there should be some letters.😃
Hi! 1. you can try run a command prompt in admin mode, and diskpart again. 2. Remove Write Protection on the Hard Disk Open up your start menu and click "Run" Type regedit in the box. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies Click the "WriteProtect" key and change the value to 0. 3. Or you can check 4DDiG Partition Manager to easily master the disks: bit.ly/3QUsnRw
If you have to format hard drive but no backup, you can use 4DDiG to recover all your data bit.ly/45626na
🎉🎉🎉Get Christmas gift from 4DDiG here: bit.ly/3Tn1NBv
my had a stopage of can help please
How can you use chkdsk on a non initialized disk, Genius?
Random commands, ....bro did you find any solution?
@@ZeUS-nr1qt Non initialized disk IS usually a hardware failure and can't do much unless you are a very technical person who can desolder eprom using hot gun and get the revelant chips online.
@@Leong-m5f trust me videos like this are waste of time..
,anyway i solved my problem and i bought a new one that's it.
@@Leong-m5fdamn. So it's over for me? 700+ gigs of games just down the drain?? Good thing I made backups of my save files at the very least.
@@slickityragnarthegreat Actually the backup should only contain data e.g game data(save game), key code, reg. code, personal data, etc. Others (programs. games etc) can usually be redownloaded. I have dl thousands of movies and series over the years but i don't even watch 1/10 of them and the same also for the game i've download, I play only a few. In the end it just taking up spaces. Recently I delete tons of movie! Why? Because I found the movie I kept was only 480p or 720p while even youtube quality is better the mine. same as game quality where last time we play seem fine but now we find it patchy and crude.
literally everyone says:
- this is the disk is giving an error, but the disk is not even showing, so how can i type for example "d:/r/d" if D doesnt even exists?
It says 'invalid parameter - /d
Bro how did you fix it then , help plzz
Frrr
thats very stupid that he is not covering this common sense issue
如果你的是外置固态硬盘可以试试我的
拔下了电脑主机原有的固态硬盘，开机BIOS能正确找到它，手能感受到它风扇正常转动，就关机，更换正常的固态硬盘测试过它的外置硬盘盒，无反应，就更换新的外置固态硬盘盒。
我的更换后就好了，初步推测是原插口供电不足或已经损坏，因为我尝试过另外两个1T和2T的硬盘，1T的正常，2T需要更换插口。
I'm getting this error.
DISKPART> convert gpt
DiskPart has encountered an error: Incorrect function.
See the System Event Log for more information.
Did you fix it
@@Elijah_12543 nope, I couldn't even retrieve data
metoo... somebody help me pls :(((
*chkdsk* is designed to check and repair issues on already formatted and initialized disks. For an uninitialized disk, you need to initialize and format it first using tools like Disk Management in Windows or diskpart command before running chkdsk.
👍👍👍Nice!
how to tell me
How do you know if there's now drive letter populated or if it was an old C drive and you already have a new c drive....these videos never seem to duplicate the actual problem entirely
So sorry for that! 😭 You can also check on disk manager, there will be a RAW drive if you don't assign the letter to Drive, you click on it, it will show you which Disk the RAW drive is located.
Warning to those who follow these steps, step 2 will format the whole drive. I found this out to late. My disc would have been saved if i did not follow these steps, now most of my data is lost.
I'm so sorry to hear that! Formatting hard drive is the last method that we can solve this problem. But it will erase all data from it, please make sure to back up all important data. If you unfortunately lose data, you can also try 4DDiG Data Recovery😭😭
The CLOWN also doesn't address that most unallocated drives in Disk management does NOT have an assigned Letter, and you can NOT add one! Pretty much a Clown show here!
@@selmonb921 Yep that's what I just commented about. How did he pick F: if in everyone's case it just shows Disk 2..etc? Mine is an old C: Drive M.2 I wanted to reuse and Ihave it in an external enclosure plugged in and getting this error. If I put C: drive since it was an old one I'd end up errasing my current C drive!
1st step resulted in formatting disk, I had a bit locker on on it,, lost data....
1:30
It says " diskpart has encountered an error: the request failed due to a fatal device hardware error.
downvote for not warning us that it will format the DIsk
0:33 I followed you but it said "cannot open volume for direct access" what does that mean?
did u fix it?
@Jmbs289 yet, I felt it would be a waste of time to fix it so I threw it away.🤓👍
Just perfect! You saved my day. Thanks.
Great to hear
You can't use check disk if the disc is unknown because if the disc is unknown it doesn't have a drive letter
I have a question ❓ . If i install new window then it fixed ?
Hi! I think it should work, but installing the new window may cause all data loss, if no backup. So we consider it the last method.
how did you know that drive f is the one that caused the error??? disk 1 is the one that is not accessible...
Error, The request failed due to a fatal device hardware error. So again no solution.
Hi Bro, I got this error after convert gpt " The request failed due to a fatal device hardware error" what shouls i do?
did you fix it, I am facing the same error
I have the same problem 😢
@musabalsalmani9779 are you resolved this issue i am also facing same issue
@@MrBalu711 No I didnt get the solution .
I had to scrap the hard disk
DiskPart has encountered an error: Incorrect function.
See the System Event Log for more information
Yo mine is same problem....when I try to do it says incorrect function
Did you find any way?
DiskPart has encountered an error: A device which does not exist was specified.
See the System Event Log for more information.
how
my drive isn't showing up in the this PC section. I tried to clean it and that worked but making partition it fails. and in the create and format hard disk partitions it says unknown not initialized when I try to initialize it says Request Failed Due to a Fatal Device Hardware Error
Hi! sorry for that. You may get help from this tutorial: ua-cam.com/video/a9juc5hZ8wI/v-deo.html
Excellent video Tenorshare! I follwed the instructions but it says "Diskpart has encountered an error: device is not ready". Any advice would be much appriciated...
@RAIDEROFTHELASTARCH Every one facing same issue, any one has correct solution...?
thanks man you were a great help : )
"Something like this happened to my SSD. The SSD is not showing up on this PC or in the BIOS, but when I check in Device Manager, it shows up as an 'Unknown disk, uninitialized'. And when I try to initialize the SSD, it says 'A device which does not exist was specified'.
Does anyone know how to fix this ?
After typing clean, it says no disk selected
Thanks for the video
In my case, when i right (convert gpt) the message came :
Diskpart has encountered an error :the request could not be performed because of an I/O device error
See the system event log for mor information. 😢
Thankyou very much is work ,is my hardisk comeback ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
u are my hero man, thank u
Thankyou for helpme fixing my problemm
It says "cannot open volume for direct access"
same bro
SAME HERE
Hi! You could try to format this volume(drive) on My PC. Right clicking it, select format, and choose the File System and Quick Format. Make sure to back up the data early if for any chance you can open the drive.
When converting to gpt disk it says virtual disk service error
Got problem while convert gpt with external hdd, it said errer access denied. Cleaning or other thing is fine
Hi sorry for that! You may get help from this video about how to solve HHD Access Denied: ua-cam.com/video/XyquR1GMmgY/v-deo.html
i tried convert gpt using method 2, it says "data error (cyclic redundancy check)". this this mean my ssd is broken and can't be use anymore?
no reply eh, the guy posted no idea with this problem
i have same problem CDC
@@ka-batangangler5248 im looking everywhere to fix this dude I have no idea what to do. If I try to initialize it just says either fatal hardware error or Cyclic redundancy check error i have no idea what to do
When convert gpt it says diskpart has encountered an error: a device which does not exist was specified. See the system event log for more information
Hei bro how you fixed this I am facing same errror
Thank you so much ♥️
How do you know the letter F, D , etc
😃
Thanku. Its working. 2nd method i used.
DiskPart has encountered an error: The request failed due to a fatal device hardware error.
See the System Event Log for more information.
This msg coming
i don't want to open the Hard Drive and its 1tb i don't want to throw also. any suggestion? and i am tired, i have lost 3Tb harddisk just because these problems.
Hello! You may find the answers from this video: ua-cam.com/video/a9juc5hZ8wI/v-deo.html
i have 2TB external hard drive then all of the sudden my laptop cant detetct my hard drive and when i check it in disk management it shows not initialized, and when i try to initialize it the CRC error shows up., any idea on how to solve this problem.
what is a b in a mini skirt?
Not showing external hard disk in Mycomputers how to recover this, you 2 steps process not working
2nd method worked, thank you!
Diskpart has encountered an error: The request failed due to a fatal device hardware error. See the System Event Log for more information
@Tenorshare4DDiGDataRecovery I am still facing "The request failed due to fatal device Hardware error " please suggest not even External drive not showing on my computers
hi, did you resolve this ??
so is this an error or does it mean your hard drive is failing?
Hi! It means the system incorrectly recognizes that the hard drive is lost or deleted, though mostly the hard drive is intact.
I had the same issue after 5 years since i bought my pc. just remove hard drive, unscrew bolts that are fixing small circuit board from back of hard drive and clean all pins and contacts where pins land. i've used an eraser and ears cotton stick and some alchool. After restart hard drive appeared again with all info's that were there
can i clean w/o alcohol?
what type of alcohol please I really need what is on this drive
Won’t let me type when I run disk part.
There is only one disk showing in list disk
this is the error i get when using convert gpt = DiskPart has encountered an error: A device which does not exist was specified.
See the System Event Log for more information.
When convert gpt it says diskpart has encountered an error: the device is not ready.see the system event log for more information.
Hi! You can try this method:
To fix it, you can try to run the troubleshooter to fix hardware issues or directly uninstall the storage controller. Here, I’ll show you how to run troubleshooter.
Step 1. Type Troubleshooter or Troubleshooting in the search box and select it from the list.
Step 2. Under the Hardware and Sound link, click Configure a device.
Step 3. Click Advanced and tick Apply repair automatically in the new window.
Step 4. Click Next to start the pending operation and repair the issues it finds.
Please share the details step by step please
Step 2 not find my windows 11 os
This same problem
'" The system cannot find the drive specified " HELP
when i try to convert to gpt
DISKPART> convert gpt
DiskPart has encountered an error: Data error (cyclic redundancy check).
See the System Event Log for more information.
the disk is not initialized and not having a letter
DiskPart has encountered an error: The parameter is incorrect.
See the System Event Log for more information.
Just right click on the drive and initialize. And go ahead to create a new volume
Question: What if the "convert gpt" command is unsuccessful?
i need help when i do the command "chkdsk f:/r/f " its shows -"Cannot open volume for direct access." plzz help
What happened I am facing same issue
@@iamdshiva1388 bro i get the solution actually ur hard disk is corrupted or dead so u need to buy a new hard disk coz we cant fix corrupter hard disks right??? trust me this is the only solution
how to find unknown drive? D or E ?
Thanks 🙏🏼
error Not Initialized no letter and partitions, any to try?
Did you find way to fix?
Great tutorial couldn’t get chdsk to work though as it just says request could not be performed due to an I/O device error. I know eventually I’ll just go around in circles as I’m always sent here for something that won’t work
Un-plug your DVD drive and use those cables to plug in your HDD or SDD. Your PC should be able to actually read the hard drive.
Once you do that. All this bull shit actually means something. 🤞🏾
Trust me on this one.
How about if the disk size display 0 0 0
Hi, it maybe a RAW drive. You can format the drive in NTFS or FAT32 or exFAT, and see if the drive turns to normal status
Thank you
Idk if i did anything, but i restarted my pc and than i was able to initialice it 🤷♂️
(( My Error Drive Is F ))
How do you know the letter ?
Hi! The drive is a part of the disk, for example, Disk 0 can be separated by C Drive and D Drive, even more you can also create a E drive for the rest of space in Disk 0, if there is an unallocated space. (My C drive is in Disk 1 though) I suppose Drive F is the removable disk, so you may recognize Drive F by checking whether the Drive F space is same as Disk 1 or 2 or 3 blablabla. And furthermore, inside the each Disk bar, there should be some letters.😃
@@Tenorshare4DDiGDataRecovery 🌹🌹🌹
this helps me alot
thanks bro 💓💓
😆
i dont want to format i have sensitive data that needs retreiving!. this tutorial is a waste
Doesnt work for me
i hope you never see your parents
When creating partition it says
Diskpart has encountered an error
Hi!
1. you can try run a command prompt in admin mode, and diskpart again.
2. Remove Write Protection on the Hard Disk
Open up your start menu and click "Run"
Type regedit in the box.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies
Click the "WriteProtect" key and change the value to 0.
3. Or you can check 4DDiG Partition Manager to easily master the disks: bit.ly/3QUsnRw
Says there is no volume
It may be because of the error of the disk, you can try this disk connecting to a different PC. Or you can initialize the disk😃
not working
Thanks
had 2 rewind it like 100 times u go too fast ..thats what she said
Fucking glorified add
Thank you
thanks
❤
TUrn off the music!!
I will turn down the music next time😭
What sw
😆
this video is bogus
Deu certo dmssss
Fake video
WTF noooo, horrible advise, DO NOT format your HDD
Formatting HHD will erase all your data !😭
Useless
Not work