ERPNext is a free, self hosted, open source ERP System that is Enterprise and Production ready.

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 237

  • @posihdun7264
    @posihdun7264 Рік тому +4

    Man I stumbled on this video by mistake, but you answered so many docker questions I had. Cool beans!

  • @Atulnavadiya
    @Atulnavadiya 10 місяців тому +1

    I saw around 50 videos regarding erpnext and this is by far the best video with explanation.. thanks alot.

  • @vvaldanov
    @vvaldanov 4 роки тому +8

    Been using since 2016.. Really good.. I pay programmer to do the set up and update what I need.. Really good video Sir!

    • @jasonyang867
      @jasonyang867 3 роки тому +2

      money power works everything up !

  • @DariusOosthuizenSuper
    @DariusOosthuizenSuper 4 роки тому +6

    Thank you so much, this is such a surprise! You heard my request! Thank you so much!

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому +1

      You are so welcome!

    • @DariusOosthuizenSuper
      @DariusOosthuizenSuper 4 роки тому

      @@AwesomeOpenSource I am only trying this now after I got my NGINX Proxy Manager setup, but now I am having problems, which I hope you might help me with. I installed everything via Docker Compose as instructed, but now I do not know how to set up my Proxy for ERPNext and which IP address I should use to point to the right Docker Container and which one is the right Docker Container? Please help! I changed the port 80 to 88 and the 443 to 444 in the .env file, but I am confused now. Please advise.

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      @@DariusOosthuizenSuper If you're running a ubuntu based system, you can type the following into a command prompt (terminal) to find the IP of your docker network.
      sudo ip addr show docker0
      that last character above is a zero.
      The IP is usually 172.17.0.1.
      Use that IP and the ports you set for your host 88 and 444 in the host entry screens.
      IF you haven't checked out my latest video on Putting it all together, it may help. I have timestamps on it, and you can jump to the NGinX Proxy Manager part, though I think I walk through it on this video as well. I did have a spot where there's just black for some weird reason when I uploaded, and then the video continues for ERPNext.

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      @@DariusOosthuizenSuper I'm wrong I didn't use NGinX Proxy Manager for this one. I just created an A Record and pointed it straight at my host VPS. But the info in Putting It All Together should help.

    • @DariusOosthuizenSuper
      @DariusOosthuizenSuper 4 роки тому

      @@AwesomeOpenSource I saw the video of the "Putting it all together" and that is how I did the Proxy manager, but should it be the same IP address for ERPNext as the Proxy manager? Then, should I then create a host entry for 88 and 444 or only one of them? I think the weird "black" part of the video was exactly when you discussed that in this video. Thank you for your help. It is really appreciated.

  • @vvaldanov
    @vvaldanov 4 роки тому +3

    1 Dec 2020 - Fresh install like this - Still working really well

    • @vvaldanov
      @vvaldanov 3 роки тому

      21-3-2021 still working

    • @vvaldanov
      @vvaldanov 3 роки тому

      Is it possible to install on synology nas docker?

  • @adiekun8326
    @adiekun8326 3 роки тому +4

    I got mine up and running by following the guide. Awesome video. My problem now is when I have issues most of their fixes are to do the bench. I am searching within the comments how to do it in docker.

  • @hophamlam
    @hophamlam 3 роки тому +1

    You really helped me with Frappe framework dude, also saw your comment on Reddit!

  • @gmachaperu
    @gmachaperu 4 роки тому +6

    Awesome job Brian! Well explained and so clear. Very easy to follow! Best of luck!

  • @patricklimacher8065
    @patricklimacher8065 4 роки тому +1

    Thank you very much Biran. I really appreaciate this.

  • @dieEinfachAnderen
    @dieEinfachAnderen Місяць тому +1

    Thank you for this video!
    You answered a lot of questions I had. But there is still one question. I want to use ERPNext for my company I just founded. Do you know if I have to do some backups myself or does the docker version do it for me? I'm afraid of losing data if something crashes. I know it is some years ago you posted the video, but maybe you can tell me how I can protect myself of losing data when using ERPNext in production. Thank you!

    • @AwesomeOpenSource
      @AwesomeOpenSource  Місяць тому +1

      There may be backup functions in ERPNext, but you should always make sure you have multiple backup strategies working, and validate the backups that are made.

  • @fernando.luccas
    @fernando.luccas 4 роки тому +1

    Great Video Brian!

  • @MdMozammelHossain
    @MdMozammelHossain Рік тому +1

    thank you for tutorial.. I'm trying to deploy ERPNext docker using Portainer. but not sure I those environment variable I can put in place.

    • @AwesomeOpenSource
      @AwesomeOpenSource  Рік тому

      You can set the Environment variables in Portainer, either in the stack, in the Form fields, or I believe you can set an environment varialbe file these days, though I'm not sure how to do it.

  • @konarkpahuja5047
    @konarkpahuja5047 Рік тому +1

    Does ERPNext connect to a custom database? For instance, all my company's data is in a MySQL DB on GCP. Can I hook up ERPNext to this database so that it reads and writes data to my original database instead of the MariaDB it uses by default? Also, is the MariaDB that ERPNext uses located within the docker container it comes in or elsewhere?

    • @AwesomeOpenSource
      @AwesomeOpenSource  Рік тому

      The way I ran it, everything was in the single docker-compose file (including the DB), but you don't have to run it that way. You can run it using an external Database if you prefer. I"m not the expert on how to do that. As for your first question, if you mean can ERPNext use data in a different schema? I don't know, but I would doubt it. That would be a better question for the folks who make ERPNext though.

  • @thelahera
    @thelahera 3 роки тому +2

    Hi I have done up to 16:32 and when i visit the URL it says "redirected you too many times" and when i visit the ip it says "404 page not found". Help please

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      Seems like I hit this when I was first going through how to set it up, but I don't recall what it was exactly.

  • @wwiras9865
    @wwiras9865 4 роки тому +1

    Thanks. Love it....Keep it up the good work..

  • @ArtificialintelligenceDesign
    @ArtificialintelligenceDesign 4 роки тому +1

    Excellent work,... many thanks...

  • @syonatha4357
    @syonatha4357 2 роки тому +1

    Can you create new video as ERPNext docker installation has changed now?

  • @Hicham_SaAh
    @Hicham_SaAh 2 роки тому +1

    I could not find env-production & env-local after using ls inside frappe-docker !

    • @AwesomeOpenSource
      @AwesomeOpenSource  2 роки тому +1

      This is a fairly old video, and I'm sure this has changed since I originally made it. Their documentation should help determine where those settings may be now.

    • @Hicham_SaAh
      @Hicham_SaAh 2 роки тому

      Thank you so much, it will be a great if you update the video information by creating a new video

  • @andrewadkins8440
    @andrewadkins8440 4 роки тому +6

    Very helpful to see someone else do it. I would love to see more on this system.
    There is an issue with the video though. 24:20 the screen goes black for a bit.

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      Yeah, something happened with my editor. Sorry about that. I'll see if I can fix that.

    • @zafarnisthar
      @zafarnisthar 3 роки тому

      @@AwesomeOpenSource Truly Awesome video tutorial ! Kudos to you for spreading the knowledge. I plan to follow the video and install ERPNext on my own. Obviously, there are many things that might go wrong not to mention that I am a newbie to opensuorce philosophy. I was wondering about the missing video from 24:20 to 25:28.

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      @@zafarnisthar No missing video, just a dumb editing error. And glad you like the rest of it.

  • @khalidelgazzar
    @khalidelgazzar 2 роки тому +1

    Great video, thank you!

  • @pusico6555
    @pusico6555 2 роки тому +1

    Please if you can make the newer version it would be great. I already follow the documentation but still error. I don't know where did i do wrong

  • @Chromaticdeth19XX
    @Chromaticdeth19XX 4 роки тому

    12.1.2020 - Can confirm this still works and don't forget to modify your ufw settings in Ubuntu for ports 443 and 80.

    • @vvaldanov
      @vvaldanov 4 роки тому

      What if port 80 not working? Which port shoul I use?

  • @epictuning7293
    @epictuning7293 2 роки тому +2

    Hi Brian, have been running Erpnext with your docker install for a few months now without any hassles. The only problem im having is to update from V13.20.1. I used nano env.production then changes the erpnext and frappe version but then i get a error after pulling the requests with docker-compose up -d. Any advise you can give me on how to update the version successfully.

    • @AwesomeOpenSource
      @AwesomeOpenSource  2 роки тому

      No, sadly, I really don't know. You'll have to check over on the Frappe site and see what may need to be changed. I just put together the docker-compose from their documented compose files.

    • @epictuning7293
      @epictuning7293 2 роки тому

      Hi, Thanks i will try to search around some more on how to update.

  • @rangabharath4253
    @rangabharath4253 4 роки тому +1

    Awesome. Please make more videos on ERP next 😀👍

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому +1

      I have a friend who is more of an ERP expert, so let me get some thoughts from her on it, and maybe I can make some more videos. Can you tell me what parts you are specifically interested in?

    • @rangabharath4253
      @rangabharath4253 4 роки тому

      @@AwesomeOpenSource Hi, Thanks for the reply. I am interested in making a pharmacy management system. Can you please suggest the options like which modules can be used in ERP next to implement this.
      At present there is no pharmacy management system in ERP NEXT. So please help me in clearing my doubts about this.
      Which inbuilt modules can be used to implement this. Please make a video on this. Thank you so much 👍😀

    • @TalimSahl
      @TalimSahl 4 роки тому +1

      @@rangabharath4253 have you checked the healthcare domain of ERPNext?

    • @rangabharath4253
      @rangabharath4253 4 роки тому

      @@TalimSahl Thanks. I will check that👍

    • @barrionomia
      @barrionomia 4 роки тому

      @@rangabharath4253 Also check GNU Health, solid ERP for the Health care system. Based on Tryton which is another good ERP.

  • @facinorousgrim8883
    @facinorousgrim8883 4 роки тому +2

    Would this set up work with using an external reverse proxy that handles all my SSL? I have a VM that has nginx in it that accepts all 80 and 443 requests from separate hostnames, and depending on the hostname it then proxy redirect forwards to another VM in the network. From what I am gathering from this, traefik handles the ssl so it may conflict with my reverse proxy?

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому +1

      I haven't tried it, but no reason you shouldn't be able to proxy to the Traefik from NGinX. Only thing I can say is give it a shot. It's a free system, so you can install it to test, and see how it goes. only Cost is a little time.

    • @facinorousgrim8883
      @facinorousgrim8883 4 роки тому +1

      @@AwesomeOpenSource tried it out and I think I got it. I tried forwarding to the 80 port of the container, but it was having redirection problems so I tried changing it to the 443 (https) port of the container. That seemed to work as I was now able to load the site.
      Then I saw a plain text "404 page not found". Fancy.
      I decided to try viewing the container from the localip:port and it shows the same thing. 404 page not found.
      Hmm. I waited until the site builder container was done doing everything as well. Maybe I should wait longer?

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      @@facinorousgrim8883 As I recall it took just a bit, but you may try again after waiting for about 10 minutes.

    • @facinorousgrim8883
      @facinorousgrim8883 4 роки тому +1

      @@AwesomeOpenSource I did some googling and came across this article.
      discuss.erpnext.com/t/404-page-not-found-after-docker-installation-on-localhost/63304/7
      Someone inside had pasted a new revised compose file. I used this one changing their port they had set for traefik to my 8098. I then went to the localip:9098 and boom.. 404 still. I quickly raised my eye brow and asked myself "what about the domain?"
      So I loaded my domain, and boom erpnext loaded. Fancy. :) thanks for the guide sir

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      @@facinorousgrim8883 Glad you got it figured out, and thank you for sharing. I'm sure others will wonder how to do this as well.

  • @pusico6555
    @pusico6555 2 роки тому +1

    Can you make new tutorial? The link for frappe docker is totally different right now. And i cant find old version of frappe docker.

  • @cmdaltctr
    @cmdaltctr 3 роки тому +1

    Hi, a silly question, I'm new to docker, I followed your tutorial, it installed successfully using DO, thank you. How do I ssh into the folder for file manager say using Filezilla, for example? I input root as username, and password with pub key authentication, and specify a path: /home/frappe/frappe-bench folder. But it says authentication failure. Thanks in advance.

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      SSH into the server first, then make your way into the folder.
      ssh me@myserver.com
      Then
      cd /path/to the/ folder

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      Oh, and if you are trying to copy from your desktop to that server, once you have the right path you can do something like
      scp /path/on/local me@myserver.com:/path/to the/folder/on/server

  • @benskikchannel9508
    @benskikchannel9508 2 роки тому +1

    how to backup old server erp to the new one using docker

    • @AwesomeOpenSource
      @AwesomeOpenSource  2 роки тому

      I don't know specifically. You'd have to check the ERP Next documents, and / or ask over at their forums.

  • @rokello
    @rokello 12 днів тому +1

    I have seen this video and it is amazing. i have gone to install and i am getting errors on the installation. Could you if possible redo a video on the current version of ERPnext. Thanks in advance

    • @AwesomeOpenSource
      @AwesomeOpenSource  11 днів тому +1

      Let me see what I can do. It's been a few years, so I"m sure things have changed.

  • @ddean3732
    @ddean3732 3 роки тому

    There seems to be a dead spot at 24:30...

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      Yep, just an oversight during editing. You're not missing anything. Sorry about that.

  • @fbifido2
    @fbifido2 3 роки тому +1

    Do you know of any IT/pc-parts inventory web interface application in docker ????

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому +1

      Snipe-IT is one I've seen a lot of people talk about.

  • @xrineuchiha7786
    @xrineuchiha7786 Рік тому +1

    Will this work with out DNS? Just with public ip? Additional congig needed?

    • @AwesomeOpenSource
      @AwesomeOpenSource  Рік тому +1

      You can probably use it inside a LAN with just a private IP, but not sure how that would be setup. I'm planning an update video this summer, so I'll try to keep in mind to show how that could work.

  • @RustemHesenov
    @RustemHesenov 4 роки тому +2

    Thank you for the tutorial! All is working very well! But I have a question. How can I access source code for edit? for example, enable development mode or run bench commands?

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому +2

      When you use Docker, everything is in the container. So there should be several containers running for ERPNext. You can see them by typing “docker ps” in the terminal.
      Next you”lol need to enter the container in terminal with “docker -it exec /bin/bash”
      This will put you in the terminal of the container to run commands. You may have to install anything you want to use, like nano to edit files, etc, because those are not usually installed by default in the container. This helps keep the image as small as possible.

    • @rufatsabzaliyev4792
      @rufatsabzaliyev4792 2 роки тому +1

      Hər şey yaxşı olacaq ;)

  • @widget_wizard
    @widget_wizard 4 роки тому +1

    Can you do a review of Axelor ERP system?

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      I'll look at it, but I need to reiterate that I know nothing about ERP systems in general. I did this install as a requested video. On the use or ERP, how good or bad it may be...I'm not expert, not even a novice.

  • @ANKUR884488
    @ANKUR884488 Рік тому +1

    Please make a video by explaining these videos.
    If you want to use oodo or ERPNext for free than we can use right?
    If we download the source code of oodo or ERPNext from github then we are the sole owner of the code?
    We are having the complete leverage of modifying it and selling it to further anyone without any legal complexity?
    We only have to pay the server cost and all modules like Customer,Sales,Accounting etc. come with free of cost?
    And if we want any enhancements like features in the ERPNext a developer should have knowledge of Python and Javascript knowledge or any another knowledge also required?

    • @AwesomeOpenSource
      @AwesomeOpenSource  Рік тому

      Each project is a little different. It's important for you to read the particular open source license that the project is using, and to understand the legalities around that license type. Open Source (in it's truest form) means you can 1. access the source code, and review it for yourself. 2. Modify the source code. 3. Redistribute the source code, modified or not. There is a ton more that goes into it, but the "free" in Free and Open Source Software means "freedom", not free of cost. Maybe this will help a bit.

  • @oluochwilliam66
    @oluochwilliam66 2 роки тому +1

    Hello, is it possible to install ERPnext on a Windows Shared Hosting?

    • @AwesomeOpenSource
      @AwesomeOpenSource  2 роки тому

      Not usin gthe docker method that I show. I'm not sure about installing manually somehow, but you'd have to read their documentation on a manual install, and make sure your shared hosting can deal with any dependencies like NodeJS, PHP, etc.

  • @mr-engin3er
    @mr-engin3er 4 роки тому +1

    Can you make a tutorial for erpnext with helm and k8s.

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      Perhaps in the future. I need to learn kubernetes first.

  • @mohammedrashid1977
    @mohammedrashid1977 Рік тому +1

    Do we still have to pay 10 $ every month after installing it like this? and whats a docker?

    • @AwesomeOpenSource
      @AwesomeOpenSource  Рік тому +2

      So, technically, no, if you install the open source version and self host, you shouldn't have to pay each month, but if you can pay something it helps keep the open source option alive. As for docker, it's a containerization virtualization system. It lets you run web applications in closed off / containerized mini-VMs. It really just virtualizes the application, and not the OS and hardware. I highly recommend you watch some videos for docker, and get familiar with it before tackling something like ERPNext.

  • @denverzimunya8303
    @denverzimunya8303 3 роки тому +1

    🙏🙏🔥thank you

  • @JunaidHussain73
    @JunaidHussain73 3 роки тому +1

    How to install Erpnext on a vps server

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      That's where I installed it in the video. I used Digital Ocean VPS, but you can really do it on any VPS following the tutorial. Note, this video is getting older, so some steps may have changed, and you may want to check the Frappe ERP documentation to make sure.

  • @pysandeep
    @pysandeep 3 роки тому

    How to setup multi site in docker, I mean how can i add multiple site, like tenant1, tenant2. etc

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      I don't think you need to set it up in Docker, but in the software itself, but I'm not an expert on ERPNext, nor ERP in general. I did this install and basic setup as a request from a subscriber, but for more advanced setup you'll need to refer to their manual and guides.

  • @riandyputra5963
    @riandyputra5963 2 роки тому +1

    hey i really love seeing your videos about erpnext, but can you try install erpnext latest version to localhost windows please sir

    • @AwesomeOpenSource
      @AwesomeOpenSource  2 роки тому

      I'm looking at doing an update video in the future. Yes, this video is getting farily old now.

    • @riandyputra5963
      @riandyputra5963 2 роки тому

      @@AwesomeOpenSource i'll push notification if you try to install in windows locallhost and push to a vps

  • @gungalgeno-7077
    @gungalgeno-7077 3 роки тому +1

    Would this site be good for artists trying to show their portfolio and sell their art/merch?

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому +1

      No, I don't really think that's what ERPNext is for. You might want something more along the lines of an eCommerce site with some sort of gallery options.

    • @gungalgeno-7077
      @gungalgeno-7077 3 роки тому

      @@AwesomeOpenSource thank you, I’ll look into those. Do you have any recommendations for gallery site or a site to sell things like comics, shirts, etc..?

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      @@gungalgeno-7077 not off the top of my head, but I’ll do a little research.

  • @mohamadbader5275
    @mohamadbader5275 2 роки тому +1

    Hello , is this system by the default tables free?

    • @AwesomeOpenSource
      @AwesomeOpenSource  2 роки тому

      At the the time the video was made, ERPNext is Open Source, and thus free to use, but you'll receive limited support if any. Their pricing page says, host it yourself $0, and if you want Enterprise support / extras, contact them for pricing.

  • @redhotsun51
    @redhotsun51 3 роки тому

    24:18 - 25:29 Blackout... whats up there?

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      Just missed it in editing. Just my mistake. You missed nothing there.

  • @chournsolidet5406
    @chournsolidet5406 3 роки тому

    one of my container doesn't work, it ends up with
    Updating customizations for Address
    Updating customizations for Contact
    *** Scheduler is disabled ***

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому +1

      Hmmm. I haven't tried to start up ERPNext in a long time. Something definitely could have changed.

    • @chournsolidet5406
      @chournsolidet5406 3 роки тому

      @@AwesomeOpenSource ok sir, and can we install it on server without sitename?
      i did with docker, but I cannot access to the page after installation on dev server.

  • @AkhilSharma08
    @AkhilSharma08 3 роки тому +1

    Thanks for this video. Extremely helpful. How do I edit the source code now? And create a new build with the changes incorporated?

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому +2

      That, my friend, is a question for their Github channel. I'm definitely not the person to help with that.

  • @leonlee8758
    @leonlee8758 4 роки тому

    Hi Sir , my erpnext Could not start up: Failed to setup defaults . May i know how to fix it ?

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      Can you tell me more about what you did during setup and where you are running it?

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      @Easy Excel is that a message you are getting? Or is it stuck on a step of the wizard?

  • @Miketochy
    @Miketochy 4 роки тому +1

    Hi, thanks for this amazing video. It was very helpful. I currently have my production environment running. However, how do i switch between the development and production mode for this specific setup.

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому +2

      I think the concept is that you setup the environment twice, once for development, and once for production. You don't want to try and use the same environment for both of those. The multiple sample files are really for you to use as a template depending on which type of environment you are trying to setup.

    • @Miketochy
      @Miketochy 4 роки тому

      Thanks for your response. So I should set up the development by setting the docker to look for files in env-local .env and install?
      Afterwards when done with the development copy the files back to production, then change file location directory back?

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому +1

      Toochukwu Obasi it depends on your goal. If you are trying to add new features, or change features you should really have 2 separate installs. One for development, which is then committed back to the project and then pulled down to your production environment. If you are trying to make changes to run locally in your own production only, you can probably do so with out changing which set of environment variables you use.

  • @Reroutmd5
    @Reroutmd5 3 роки тому

    I tried many times but I am getting an "Internal Server Error" message despite all containers started successfully, please help

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      I need a bit more to work with. That's not a very helpful message.

  • @toni_canada
    @toni_canada 3 роки тому

    Nice video, thanks! If I need to setup several sites, how I configure the different ports of the container, for each site?

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      Glad you like the video Antonio, but you are definitely getting a bit over my head on this. I think ERPNext is Multi-tenant capable, but don't hold me to that. If I were to set it up, I would just setup separate containers with their own separate port mappings on each container. You can change the left side port number (the host machine port) to any port you have available, then just leave the right side port alone ( -p : when setting up the docker-compose.yml files.

  • @vinaypattankude1592
    @vinaypattankude1592 3 роки тому

    Hi I just completed the process, and but its showing ubuntu default page, should I wait for the app to install, or any troubleshooting suggestions?

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      Give it about 10 minutes, and try again, but if it still doesn't come up, check the docker logs. You can use the
      docker-compose logs
      command.

    • @vinaypattankude1592
      @vinaypattankude1592 3 роки тому

      These are the last lines where error is mentioned

  • @abhijeetpanigrahi4164
    @abhijeetpanigrahi4164 3 роки тому

    i have followed the step and was able to successfully set up ERPNext without the VPS , but was unable to open the website erp.example.com. What can i do?

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      Want to make sure you didn't use the actual domain erp.example.com. You would need to own the domain "example.com". What you would want it so have your own domain, and set that as your domain in the docker-compose file.

    • @abhijeetpanigrahi4164
      @abhijeetpanigrahi4164 3 роки тому +1

      ​@@AwesomeOpenSource yes i used erp.example.com. So can't i create the site without owning the domain ?

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      @@abhijeetpanigrahi4164 correct.

  • @northernadventurer160
    @northernadventurer160 4 роки тому

    Nice video, but you kind of skirted over nginx part. I really dont want to host on default ports for security reasons. Can you explain more what I should do after edit the treafik file please.
    Edit: not as complicated as I thought it would be. Just edit the port as you say then simply add the port number in the end of url. You don't need to mess about with nginx manager if you dont want to.

  • @DonMaverick
    @DonMaverick 4 роки тому

    Thank you so much for this. however, I noticed that when the system restarts traefik enters a restart loop. what can I do please?

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      Don X you might just stop and start the traefik container.

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      Don X also, if I am intentionally rebooting the host, I do “Docker-compose down”, then reboot the host after it’s stopped all the containers, then do “docker-compose up -d” after reboot.

    • @DonMaverick
      @DonMaverick 4 роки тому

      @@AwesomeOpenSource thank you so much for the response, you rock! will try it when I have the issue again. btw, is there a way we that benefit from you can support you?

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      Don X absolutely. First, like and subscribe it’s free for you, but makes UA-cam algorithms know I’m making good content.
      Next, I have affiliate links in my show descriptions, so if you would like to use Digital Ocean, SSDNodes, or Hover domain hosting, using my links gives you a credit and me a credit...so we both win.
      Finally, I have Patreon if you’d like to be a Patron. Link is also in the show description.
      Any of these is absolutely wonderful, but just having folks watch and get something out of what I’m doing is the best thing of all.

  • @edrive2769
    @edrive2769 4 роки тому +1

    Is it possible to install it as on premise?

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      Yes, that can be done. Same method.

    • @edrive2769
      @edrive2769 4 роки тому

      @@AwesomeOpenSource thanks :)

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      @@edrive2769 no problem. The only difference will be that you need to route traffic into your network to your server.

    • @edrive2769
      @edrive2769 4 роки тому

      @@AwesomeOpenSource actually i've just try 2 method, 1st.to install ubuntu on vbox, install docker, get frappe and run docker, afterthat im stuck, i cannot define the localhost to access the nexterp, 2nd. I try to download the production image, import it to vbox and voala i can access it on my host, using localhost:8080 address, but no clue how to access from other laptop.. FYI im not IT person, i will try to diggin more. Thx

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      @@edrive2769 from virtual box, you need to enable the network bridge in then box settings for that virtual machine in order to reach the virtual machine through your network.

  • @manojmahadadalkar643
    @manojmahadadalkar643 Рік тому +1

    Awesome video but now everything is changed and couldn't find a way for proper production installation. Can you please make a new video asap. Btw I follow all your videos and try in my local lab

    • @AwesomeOpenSource
      @AwesomeOpenSource  Рік тому

      Yep, it's pretty old at this point. Have an update planned for this summer.

    • @StevenRayVaughan
      @StevenRayVaughan Рік тому

      Where might this be? None of this method works...I've been scratching my head for 3 weeks now.@@AwesomeOpenSource

  • @KrispyKruiser
    @KrispyKruiser 3 роки тому

    Thank you for the video. Did you have to do anything special to get the LetsEncrypt SSL cert working? I can only access it through http and not https. It still says my site is Not Secure.Any help would be greatly appreciated.

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      It depends on where you are running it. If you are running it behind a firewall with closed ports, then you'll have to allow port 80 and 443 for LetsEncrypt to be able to reach your site, then to issue the certificates.

  • @engfatma549
    @engfatma549 4 роки тому

    I want to ask about the time available for me to use ERP, is it possible for the block to happen

    • @TalimSahl
      @TalimSahl 4 роки тому

      Hi , for implementation if your data is ready it takes only one month to be live.

  • @imoldovan
    @imoldovan 2 роки тому +4

    This no longer works. An update would be helpful because the documentation they have is very poor. Thank you for everything.

    • @AwesomeOpenSource
      @AwesomeOpenSource  2 роки тому +2

      It's on my list of to-do's. Not sure when I'll get to it, but it's definitey on my list.

  • @rahelmulugeta7109
    @rahelmulugeta7109 3 роки тому

    hey man when I ssh root@IP it says permission denied (Publickey) pls tell me how can i fix it.. no solutions doesn't seem to work

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      Sounds like you setup a public key on your server, and the machine you are trying to SSH in from doesn't have the proper corresponding public key. Did you setup the key pairs on your local machine, or on the server machine you are running ERPNext on?

    • @rahelmulugeta7109
      @rahelmulugeta7109 3 роки тому

      @@AwesomeOpenSource yes... i did... first i create a public key using the cmd then i copy and paste it in text feild... but no solution worked for me... i need ur help

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      @@rahelmulugeta7109 Is this on a VPS like Digital Ocean?

    • @rahelmulugeta7109
      @rahelmulugeta7109 3 роки тому

      @@AwesomeOpenSource yes ... but i created an new public key....for some reason it worked .... but I'm still facing an issue ...ERP was working...but now it doesn't... it says DNS_PROBE_FINISHED_NXDOMAIN

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      @@rahelmulugeta7109 I'm sorry friend, but I have no idea what that might be. The error indicates there's something wrong with the configuration of the domain name you have setup.

  • @rjayabharath
    @rjayabharath 4 роки тому

    Hello Thanks for the video. Do we need to pay per user for self hosting?

  • @mohamedatef8424
    @mohamedatef8424 2 роки тому

    Hello Nice Work and im learning From u :)
    i Trying to make self host to his erp by docker but i got some error and i cant understand something docker-compose.yml file that file im making or its with project cuz i dont see it in files !

    • @mohamedatef8424
      @mohamedatef8424 2 роки тому +1

      i resolve the issue docker was using wrong yml file :) thanks :D

    • @AwesomeOpenSource
      @AwesomeOpenSource  2 роки тому +1

      Glad you got it fixed.

    • @mohamedatef8424
      @mohamedatef8424 2 роки тому

      @@AwesomeOpenSource
      Thanks but i have question
      When i got it fixed and work
      Its normal
      Not have any module idk why
      There not aset, hr, accounting.. Ect

  • @JayPatel-wn7hs
    @JayPatel-wn7hs 3 роки тому

    Can we installation via Portainer?

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому +1

      In theory, you could do it through portainer, you just have a lot of Environment variables, volume mapping and port mapping to setup in the portainer ui.

    • @JayPatel-wn7hs
      @JayPatel-wn7hs 3 роки тому

      @@AwesomeOpenSource okkk...
      Because i was try as same you tutorial...
      But only one container is stopped working(site_creator)....
      And his logs say's "erp.mysite.in" site already exists.

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому +1

      Just saw this comment, sorry about that, but if it says site already exists, then you may have a container that is already running, or it may be in a stopped mode with that site name. You'll want to do the command
      docker-compose down
      Let everything stop, then make whatever change you need to make, and do the command
      docker-compose up -d
      again after that.

  • @broph3n
    @broph3n 4 роки тому

    How do you update erpnext in docker?

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому +2

      You would run the command "docker-compose down" from inside the same frappe folder. Then run the up command again and it should pull the latest version if you have "edge" listed in the .env file. If that doesn't work, however, you can remove the images from docker with the "docker rmi " command, then run the "docker-compose up -d" command again, and it will pull latest images.
      All of this depends on you having the volumes setup properly. I would not remove or update the database container if you did any of this either, as that would result in loss of data.
      The documentation also has update instructions I believe.
      Hope that helps,

    • @madhurammoorthy7490
      @madhurammoorthy7490 4 роки тому

      @@AwesomeOpenSource where do I find the frappe folder to run docker-compose down command?

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому +1

      @@madhurammoorthy7490 just run it from the same place you ran Docker-compose up command

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому +1

      @@madhurammoorthy7490 basically from where your Docker-compose.yml file is.

  • @fayezaladeem
    @fayezaladeem 4 роки тому

    ERROR: Couldn't connect to Docker daemon. You might need to install Docker:

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      If you are following my instructions you need docker. If you have docker, you may just need to log out and back in, or reboot, maybe the daemon is hung.
      You can opt to run ERPNext without docker, they have instructions on their site for running without docker as well.

  • @monishdoshi3964
    @monishdoshi3964 4 роки тому

    Nice Video.... Thanks for the easy setup.............. But i was wondering how can we restore data to a new setup

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      Copy the mapped volume folders you created on the current setup, to your new setup, and use the path to those copies to map to the container foldeers when you run the docker command to bring it up. Generally that will keep your data, and let you move it around.

    • @monishdoshi3964
      @monishdoshi3964 4 роки тому

      @@AwesomeOpenSource Thank You for your reply, but I am new to linux and erpnext.
      I have setup a new account on a server as per the video. Have downloaded the backup from erpnext cloud, I tried copying the data from winscp, but am not sure in which folder to place the backup and which command to use to restore data.
      So could you please guide me step by step?
      Would really appreciate it

    • @monishdoshi3964
      @monishdoshi3964 4 роки тому

      @@AwesomeOpenSource Thank you!!
      But am new at linux and erpnext. So could you please elaborate more with specific steps. I have downloaded the backup from erpnext cloud, have setup a new website as per the video, tried copying backup files to the server using WinSCP but wasn't sure in which folder to copy the files and which command to use to restore data.
      Would really appreciate if you could help with this.

  • @nirajsheladiya8246
    @nirajsheladiya8246 4 роки тому +1

    Sir Telegram id not found :(
    please update me

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому +1

      Just checked, and it's @MickInTx Let me know if it still doesn't work. Have had a few conversations with folks from youtube videos this week.

    • @nirajsheladiya8246
      @nirajsheladiya8246 4 роки тому

      @@AwesomeOpenSource still user not found can you just message me hii on @nirajsheladiya telegram

  • @bilalblah2865
    @bilalblah2865 2 роки тому

    can you host this on heroku free???

    • @AwesomeOpenSource
      @AwesomeOpenSource  2 роки тому

      I don't know much about heroku or their restrictions / limitations.

  • @wazy1852
    @wazy1852 3 роки тому

    Is there a way to use ERPNext entirely for free?

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      I don't guess I understand the question. It's open source, so as far as I know you can use it for free. If you want them to host it for you, or you want support, you'd have to pay...I believe.

  • @JurgenRamirez
    @JurgenRamirez 3 роки тому

    why mariadb_1 | 2021-03-05 17:55:06 16 [Warning] Access denied for user '_3cde9797d51204e4'@'172.18.0.11' (using password: YES)

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      Don't know. Could be that you haven't allowed remove connections in MAriaDB yet.

  • @Username-yv9pc
    @Username-yv9pc 2 роки тому +1

    Video outdated. ERP updated their software with new documentation

    • @AwesomeOpenSource
      @AwesomeOpenSource  2 роки тому

      Yes, this one's pretty old these days, it's always best to check the project docs for updates.

  • @waqarbhatti5230
    @waqarbhatti5230 3 роки тому

    thankyou sir

  • @seemanchallivebihar
    @seemanchallivebihar 3 роки тому

    404 error page not found

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      If you were looking for the test site I had up, I shut it down a month or so after posting the video. I only leave up my test sites for a few weeks generally. It's free to setup, so give it a try.

    • @nivlek_007
      @nivlek_007 3 роки тому

      @@AwesomeOpenSource
      Got the same error after following too.

    • @nivlek_007
      @nivlek_007 3 роки тому

      I followed you tutorial to create mine, got internal server error when I access it via the URL I assigned it on the .envelope file and 404 page not found when I add :80 to the URL.

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      @@nivlek_007 You shouldn't have to specify port 80, that's the default port when no port is specified if not using SSL. 443 is the default if using SSL and no port is specified.

  • @fakakiss
    @fakakiss 4 роки тому

    you skipped how you run the app with docker after installation ..

  • @fbmtechno
    @fbmtechno Рік тому +1

    ERP= Enterprise Resource Planning ( not entity)

    • @AwesomeOpenSource
      @AwesomeOpenSource  Рік тому

      Thank you. Yes, a few other folks pointed that out as well.

  • @rahelmulugeta7109
    @rahelmulugeta7109 3 роки тому

    Hey there dude.... pls i need your help when i try to run the docker composer it fails due to disk space... can you please send me ur email to send you the pictures... i need ur help bro ..

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      Hey, feel free to head over to discuss.opensourceisawesome.com and ping me in one of the channels. I'll be happy to help out.

  • @allanmageto7123
    @allanmageto7123 4 роки тому +2

    Hey please hide your other ip addresses next time :)

  • @brycedavey1252
    @brycedavey1252 4 роки тому

    ERPNext is a "fee"

    • @AwesomeOpenSource
      @AwesomeOpenSource  4 роки тому

      Do you mean "has a fee?" I don't understand. Can you point me to a link?

    • @brycedavey1252
      @brycedavey1252 4 роки тому +1

      @@AwesomeOpenSource sorry some how lonely sent half the message
      In the description you have a small spelling mistake at the beginning of the second paragraph. Nothing huge.
      That's for the videos BTW very useful

  • @bsedens
    @bsedens 3 роки тому +1

    It’s not ENTITY RESOURCE PLANNING.
    ERP = Enterprise Resource Planning

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому

      You're right. I just get tongue tied (a lot), but it is indeed Enterprise Resource Planning.

  • @syonatha4357
    @syonatha4357 2 роки тому +2

    Can you create new video as ERPNext docker installation has changed now?

    • @AwesomeOpenSource
      @AwesomeOpenSource  2 роки тому +1

      I will be updating it for my Building a Business on Open Source Series. Not sure when it will fall, but it is coming.

  • @midley
    @midley Рік тому +1

    Can it be installed on a linux shared hosting or vps ?

  • @marcossousa1196
    @marcossousa1196 3 роки тому

    I followed everything you did I keep getting 404 page not found error I’ve got my own domain set up the dns but its still not working any advice please

    • @AwesomeOpenSource
      @AwesomeOpenSource  3 роки тому +1

      This video is getting fairly old, so the image and requirements may have changed. I’ll check it when I get a chance. I have another video on another ERP / CRM system coming soon as well.