Hi, I think many would be interested in a basic E85 1.8t video, coldstart fkstt fnsmm adjustment... ignition... another question why enrich by bts rather than LAMFA? bts is better tune? thank you
Hi there! I just bought ME7.5 from 2002 BAM version and want to adapt it in my older 2000 AJQ. I need to write a new map with immo off + disabling the VVT. I wonder if it can be done through the OBD? Or i need to get something like ktag or other tool? Thank you in advance
Hi guys, i need help. I have mounted an hybrid turbo for my golf mk4 1.8t. I have stage 2+ for 2.75 maf oem and k03s. Now i have connected a k04 maf and the car wont even stand on ralenti. Could you help me or tell me what to change in winols? Thanks in advance
How edgy is this program? I have a stock b7 with me7.5 and I'm a bit afraid of serial injections and ic.For a start I would like to get around 180hp(163hp serial) from the map, decat + p & b
Hi, ich habe ein a4 8h B6 Cabrio BFB 1.8T. Welche Hardware würdest du empfehlen um das Steuergerät auslesen und danach wieder einspielen zu können? Taugen die Geräte auf eBay was?
bonjour Jai actuellement un fichier éthanol sur mon 1.8t 180chv ary si je change les valeur comme indiqué pour avoir le stage 1 + mais valeur seront pas bon pour l éthanol ?
excellent video very informative and was very helpful with my jetta MKIV GLi . Case apart by any chance do you know how you can do something similar on an AGU ? (bosch m3.8.3 , ECU CODE 06A906018CJ/CG , I never found a functional OLS to modify this ecu ,nor tutorials with information about it so I could never take full advantage of the mods I have installed on my A3 (turbo K04 001, inlet , intake , downipipe ,4bar FRP ) . as extra info I have a .bin of my ecu and mpps can write it without problem ( just can't read it )
@@vmconcepts-official I did tested TunerPro (bin and xdf from neftmoto) and values are almost the same as You showing in every map/variable Then did all of the increaments +, checked values Then Me7Sum IN.bin > OUT.bin corrected X errors, At the end Mecheck OUT.bin Got 0 errors, can that file be written to ECU, or I will brick that piece again. Hahah Can I be sure, that making my way through stock map + fitted xdf will be okay? I am not changing the ECU, so immobilizer will not be touched.
@@vmconcepts-official Thank You for the reply, I already done that to a file through cmd I did used open source ME7 Then Me7Sum IN.bin > OUT.bin corrected X errors, At the end Mecheck OUT.bin Got 0 errors That's it?
I dont see the damos file in the description:( Do you have a link? I have a 2002 turbo s beetle (180ps stock 10psi) and i cant find any info on tunes for it and id love to be able to... i used a ktag to pull the programming... However none of the 1.8t damos seem to match mine as most turbo beetles aren't the turbo S model with AWP engine and 180ps. My ecu data in winols: 261207266 1C0906032 / software: 360982 Thank you man for posting this, its awesome, subscribed for sure!!!
Thank you so much! Great video. Just one question, is this valid for 1.8t BEX engine?
all me7.5 are similar.
Hi, I think many would be interested in a basic E85 1.8t video, coldstart fkstt fnsmm adjustment... ignition... another question why enrich by bts rather than LAMFA? bts is better tune? thank you
can you calculate only on the throttle, without maf?
Hey , weißt du den Suchbefehl oder den Namen für die n75 map ? Ich habe es vergessen 😅😢
nicht mal ein Abo, aber Fragen stellen.
Hi there! I just bought ME7.5 from 2002 BAM version and want to adapt it in my older 2000 AJQ. I need to write a new map with immo off + disabling the VVT. I wonder if it can be done through the OBD? Or i need to get something like ktag or other tool? Thank you in advance
ktag yes
Kess does not read eeprom data....
Hi guys, i need help. I have mounted an hybrid turbo for my golf mk4 1.8t. I have stage 2+ for 2.75 maf oem and k03s. Now i have connected a k04 maf and the car wont even stand on ralenti. Could you help me or tell me what to change in winols? Thanks in advance
Where did you get that damos from, i am looking to do stg1 and pops on my 1.8t me7.5 but i don't have those german text on left ?
support only for channel members now.
Gibt es bei den me7.5/m1.5.5 Steuergeräten kein VE / Einspritzzeiten Kennfeld?
Bin mich da am durchklicken. finde aber alles außer das lol
How edgy is this program? I have a stock b7 with me7.5 and I'm a bit afraid of serial injections and ic.For a start I would like to get around 180hp(163hp serial) from the map, decat + p & b
Hi, ich habe ein a4 8h B6 Cabrio BFB 1.8T. Welche Hardware würdest du empfehlen um das Steuergerät auslesen und danach wieder einspielen zu können? Taugen die Geräte auf eBay was?
bei den meisten vag fahrzeugen funktioniert mpps problemlos. am besten ist natürlich kess.
@@vmconcepts-official Kann man das MPPS von eBay Bedenkenlos nehmen?
@@Edik777 ja hatte bis jetzt bei älteren fahrzeugen keine probleme mit.
@@vmconcepts-official Super, Danke dir!
bonjour Jai actuellement un fichier éthanol sur mon 1.8t 180chv ary si je change les valeur comme indiqué pour avoir le stage 1 + mais valeur seront pas bon pour l éthanol ?
il faut changer la valeur de l'éthanol
Hello,.please what have you done with kfldh? Thanks!
hi this values calculated before in excel
@@vmconcepts-official any idea which kind of formula.you used? Thanks.
Where can we get the mappack?
Pls Make Stage1+ For 1,8t with K04.001 Turbo Upgrade 😃
yes
do u know how to do map switching on this me7.5?
hi, I need advice from kfldhbn about where you got the values for this map and what should I enter there?
hi, i also don't understand. copy/paste? some decreased others increased?
@@jean-jean4782 but I don't know where he copied those values from
I did not touch the negative value but the rest I selected and adjusted according to these values
calculated in excel, copy&paste
excellent video very informative and was very helpful with my jetta MKIV GLi .
Case apart by any chance do you know how you can do something similar on an AGU ? (bosch m3.8.3 , ECU CODE 06A906018CJ/CG , I never found a functional OLS to modify this ecu ,nor tutorials with information about it so I could never take full advantage of the mods I have installed on my A3 (turbo K04 001, inlet , intake , downipipe ,4bar FRP ) .
as extra info I have a .bin of my ecu and mpps can write it without problem ( just can't read it )
yes its possible. need change DLPN,KFZWOPT,KFZWMN,
DKLDSPN. And works only open exhaust system.
@@vmconcepts-official nice! , do you have any Ols or KP file (winols 2.4) for these ECUs that you can share with me ?
@@Residentxevil2 its m3.82??
@@vmconcepts-official M3.8.3 suport OBD write flash .
ECU codes 06A 906018CJ ir 06A 906018CG
@@Residentxevil2 i have damos for m3.8
I have .bin file, and WinOLS, but I cannot find anything of those values. Im sure, that I need something more, kp? Map pack? Where do I get that from?
yes damos of map pack
@@vmconcepts-official
I did tested TunerPro (bin and xdf from neftmoto) and values are almost the same as You showing in every map/variable
Then did all of the increaments +, checked values
Then Me7Sum IN.bin > OUT.bin
corrected X errors,
At the end Mecheck OUT.bin
Got 0 errors, can that file be written to ECU, or I will brick that piece again. Hahah
Can I be sure, that making my way through stock map + fitted xdf will be okay?
I am not changing the ECU, so immobilizer will not be touched.
@@driftmate4871 make Checksum correction before flashing
@@vmconcepts-official Thank You for the reply, I already done that to a file through cmd
I did used open source ME7
Then Me7Sum IN.bin > OUT.bin
corrected X errors,
At the end Mecheck OUT.bin
Got 0 errors
That's it?
@@driftmate4871 make this better with winols.
What is clamdb pls ?
I dont see the damos file in the description:( Do you have a link? I have a 2002 turbo s beetle (180ps stock 10psi) and i cant find any info on tunes for it and id love to be able to... i used a ktag to pull the programming... However none of the 1.8t damos seem to match mine as most turbo beetles aren't the turbo S model with AWP engine and 180ps.
My ecu data in winols: 261207266 1C0906032 / software: 360982
Thank you man for posting this, its awesome, subscribed for sure!!!
sorry can't do here all damos files for all engines
clamdb ->0 ? (Fehlerklasse: Momentbgrenzung Sollmoment) What does this do ?
Did you find out?
It is to disable fault code related to "torque limitation desired torque", so ecu wont show MIL to you. It is bandaid to real problem.
When done correctly, then you wouldn't need touch any of them CLA*** fault code classes :)
Kann ich das auch bei m5.92 Passat 1.8t machen?
kannst die selben werte nicht verwenden und brauchst das passende damos/mappack
Hey man How can I give my Files in Win OLS units to the Hex Datas, like with Damos and Can i Download them for Me7.5 and such files
Gold membership
Mercii ❤️❤️
Sprichst du deutsch? Und ist der Kanal noch aktuell?
ja ich spreche auch deutsch. und ja der kanal ist aktuell
hi hast du zufällig n xdf oder kp Mappack für 4B0906018K ME7.5 ANB Motor (512mb)
mfg
nur für gold mitglieder. 1 damos for free wenn wir es in unserer datenbank haben
where can i get Winols
google "winols 4.26 buy"
Hi, wo bekommt man das damos file her? :)
ich suche raus
@@vmconcepts-official super danke
Works on ME 7.5.5 too?
no
Is this file 512kb or 1mb?@@vmconcepts-official
Today did Stage 1 based on Your video and Boost increased from 0.7bar to
yes the videos are for start in winols. sorry i can't make here full remap and show all changes.
Sorry today noticed that it isnt Knocks sensors, it is just Ignition Intervention maps are wrong it just can't work :)
@@Fabio_E30 oookey :)
Can anyone help with 8E0909518AS file, I can't find KFMLDMX?
send me your file.
for 1ML906032 0001 ?
I dont see kfmdmx
you have other ecu? 512kb or 1mb?
in the video it is kfmLdmx, i think this is correct
@@radoslavivanov9353 yes
@@vmconcepts-official 1mb
Pls the same with K04 .001 Turbo.
better remap on dyno.
HEY mate, how can i reescale my 2.75" MAF to 3" MAF S3? Cheers
why this maf?
Hello friend, very good video, do you have any data for this file? 06A906032HP SW 360647
yes have map pack for this ecu. you can contact me. my email can find in last video description.
hello friend, can you send me DAMOS, thanks?
Nice, bro can you send me your xdf file for me 7.5?
sorry i dont use tunerpro
@@vmconcepts-official Okay, i have two questions. What you do in kfldhbn and in kfmirl i have to add 18% from 4000 to max?
@@garret1337 please do same values like me on video
Which ECU number do you need? I have XDF's
@@allyouaskfor 06A906032BJ
PLS create map for ECO tuning
???
@@vmconcepts-official Eco sorry😂
@@FLXRIAN92 ok :)
Legendary info!
thx mate
Can you pls put DAMOS file for it? Like in yours new vidio for 2.0 TFSI. 🙏🙏🙏
Damos File Link in Description.
@@Insane98 hey Denis sure i need one can you pls send me a DAMOS file.How can I contact you?
Yes sure my ECU number is 8E0906018B. How can i contact you
...
the car runs fine without problems. you can try your values.
do not have to be exactly like in the video
wjajjalol
10.3 afr would be richer than 12.2, not leaner. Unless I'm just misunderstanding what you're trying to say.