Really accurate!! Useful also in case of maintenance! Looking at the costs...I think buying a new brand Kabolite 336 GC will cost nearly the same than upgrading (unfortunately) ...but in the end you will have 2 excavators (for sure a plus) !
@@RCConstructionHobby maybe you are right...Kabolite 336 GC is not so powerful (only 3kg forearm, 4kg bucket) ...your suggested upgrade hope maybe better !
its really really wonderful build good job bud excellent work👍 but i see you put plastic servo you must put it metal gear servo because the pressure needs to the high pressure the plastic is useless anyway i hope 2see wheel loader hydraulic from huina himself we needs hydraulic no more electric its wonderful video pal thx✋
@@RCConstructionHobby yeah dude that what's up try use servo 4 earth mover 870k micro servo 3kg 4.8v this servo on earth mover 870k already when you buy it her he metal gear and very strong
Sorry I dont have a video of it. I cut the door out and put a 3d printed design that I created in place. Tools I used was a Drexel tool and a metal cutting blade.
Hello! Could you please explain what the difference is between to the original arm and the magom arm? It it longer and can lift higher? Is it worth the extra money? Greetings
Yes the main boom is about the same length. But the stick is longer and will lift higher to get into the tamiya trucks better. I think its worth it for the extra height.
Thanks for the new video, best wishes to all Americans and congratulations to the new president. 🥂 Stay healthy my friend and greets from Berlin Germany !! 😷 👍
Hello. I'm new to your channel. I'm just getting into rc excavators which I've got the huina 1593. Will this hydraulic kit fit the 1593. Also do you know where I can buy metal tracks for it as looked all places I could think of with no luck. Many thanks
The block is ok. I find that it does not hold the cylinders 100% in position. There is some sagging when the valves are closed. I think that the chinese stuff might be stronger at holding pressure
@@RCConstructionHobby suffer from the same problem by the sound of it, not a Magom block though. I presumed its down to a leaky cylinder ? although it works fine.
I have had leaking cylinders as well. It was not a good start with this kit. I dont know if they make there own cylinders and block or just get Chinese and ship it as a kit. They told me they tested everything yet I had 3 leaking cylinders. And a chattering servo for the main cylinders.
I'm loving it so far. If you were to use metal servos do you have to use a specific size (guessing the mounts would have to match the servo block....right)
Hi, what maximum battery can I install for the Huina 580 excavator? I would like 5000mha, but that it would fit into the excavator instead of the original battery
You have to modify the inside to fit a 5000mah. I fit a 5000mah and have hydraulics but has to be a shorty battery not a long 5000mah as it is to long.
Thnx for the video. Your pronouncing "chamfer" wrong. To simplify it, say "sham, fer", that's still spelt shamfer, but is the correct terminology for chamfer, I'm English, we invented grammer lol..
well ya since the 4200xl is on sale right now sure go for the 4200xl. but if you want to build something yourself or if you want something smaller then the Huina hydraulic might be a better option. then again you can get the new Kabolite for about $1700 or the EC160. So many choices its up to you to decide what works for you. This is just one option.
Wow, I have been waiting for a video like this. I hope you explain and show every step of the conversion. Looking forward to this man!
Yes every step in detail. Hope it helps.
Excellent huina 580 conversation
😊👍 Excellent video my friend, Very informative!
I watched from front to back, along with at least 15 seconds of every commercial.😂👍👍
Thank you. Glad you enjoyed it
Really accurate!!
Useful also in case of maintenance!
Looking at the costs...I think buying a new brand Kabolite 336 GC will cost nearly the same than upgrading (unfortunately) ...but in the end you will have 2 excavators (for sure a plus) !
To be honest the 336gc is not that great. I like the huina 580 conversion way better. If anything get the volvo ec160 from double e.
@@RCConstructionHobby maybe you are right...Kabolite 336 GC is not so powerful (only 3kg forearm, 4kg bucket) ...your suggested upgrade hope maybe better !
Woww... spettacolare...bel video ... ciao dall'Italia
Thank you
@@RCConstructionHobby grazie a te del bel video ...mi è venuta voglia di acquistare uno scavatore RC ... ciao Grande
fantastic! it is a great machine to play with.
If you warm up the hose first it will slide on the fitting really easy.
Yes that is a good tip. These were not to bad. The collar.thst goes on after was a probably harder or more annoying.
its really really wonderful build good job bud excellent work👍 but i see you put plastic servo you must put it metal gear servo because the pressure needs to the high pressure the plastic is useless anyway i hope 2see wheel loader hydraulic from huina himself we needs hydraulic no more electric
its wonderful video pal thx✋
I agree it needs better servos. These are the servos that magom supplied in the kit.
@@RCConstructionHobby yeah dude that what's up try use servo 4 earth mover 870k micro servo 3kg 4.8v this servo on earth mover 870k already when you buy it her he metal gear and very strong
Hey verry good explainend thanks 👍👍👍👍👍👍thumps up hope Magom nows from the 14mm piece
thanks for your video.
do you have one for opening the cabin door?
Sorry I dont have a video of it. I cut the door out and put a 3d printed design that I created in place. Tools I used was a Drexel tool and a metal cutting blade.
I like the simple way of your explaination ... Its is more powerfull after upgrade?
Thank you, and yes it is more powerful and accurate.
@@RCConstructionHobby cant wait to upgrade my unit
Hi again, I just like to know the closed length and open lengths of the cylinders please. Magom makes them 10mm od to 18mm od
Great question. I am not sure but if you message magom Anna will be able to tell you the exact measurements.
Hello! Could you please explain what the difference is between to the original arm and the magom arm? It it longer and can lift higher? Is it worth the extra money? Greetings
Yes the main boom is about the same length. But the stick is longer and will lift higher to get into the tamiya trucks better. I think its worth it for the extra height.
@@RCConstructionHobby ok cool. Thanks a lot
Hi I like to do this to my excavator as well but I need to know the Length of all the servos please
The servos are 9g servos. So standard micro servo size. Why does the size matter? It all fits.
Thanks for the new video, best wishes to all Americans and congratulations to the new president. 🥂 Stay healthy my friend and greets from Berlin Germany !! 😷 👍
Thank you hope you are doing well. From Canada.
I know I'm kind of off topic but does anybody know of a good site to watch newly released tv shows online ?
Can it fit at other RC excavator such as WL16800 ?
With modifications it can.
and what to do if one caterpillar does not drive because the metal is cracked and can stick together?
There are replacements available on aliexpress or wuehlbox.com
How much longer is the magom arm vs the stock arm?
About an inch and or 2. It is worth it.
So did you have to buy the magom arm kit and then then the upgrade kit for the arm ? Or did you just buy 1 kit with it all
You end to buy the arm and the hydraulic kit.
Hello. I'm new to your channel. I'm just getting into rc excavators which I've got the huina 1593. Will this hydraulic kit fit the 1593. Also do you know where I can buy metal tracks for it as looked all places I could think of with no luck. Many thanks
Hi Graham, I dont think the hydraulic kit will fit this machine but you can get tracks from aliexpress. just search up huina 580 tracks.
@@RCConstructionHobby thanks very much ill have a look and let you know how I get on
Nice✅👍
How would you rate the quality of the servo block?
The block is ok. I find that it does not hold the cylinders 100% in position. There is some sagging when the valves are closed. I think that the chinese stuff might be stronger at holding pressure
@@RCConstructionHobby suffer from the same problem by the sound of it, not a Magom block though. I presumed its down to a leaky cylinder ? although it works fine.
I have had leaking cylinders as well. It was not a good start with this kit. I dont know if they make there own cylinders and block or just get Chinese and ship it as a kit. They told me they tested everything yet I had 3 leaking cylinders. And a chattering servo for the main cylinders.
@@RCConstructionHobby Not exactly comforting at the price (MAGOM is not cheap)...should be a lot better
I'm loving it so far. If you were to use metal servos do you have to use a specific size (guessing the mounts would have to match the servo block....right)
Yes 9g servos will fit. I would think metal servos will do. That is something I want to do over the winter.
Do you know if this company ships to the US 🇺🇸
Yes I believe they do.
Thanks, subscribed
❤
احسن حفاره هوينا
Please what Is this for music?
Alone -Emmit Fenn. It is in UA-cam music.
Hi, what maximum battery can I install for the Huina 580 excavator? I would like 5000mha, but that it would fit into the excavator instead of the original battery
You have to modify the inside to fit a 5000mah. I fit a 5000mah and have hydraulics but has to be a shorty battery not a long 5000mah as it is to long.
Thnx for the video.
Your pronouncing "chamfer" wrong.
To simplify it, say "sham, fer", that's still spelt shamfer, but is the correct terminology for chamfer, I'm English, we invented grammer lol..
Lol I'm canada we say chamfer. But it's like the English say aluminium and we say aluminum.
@@RCConstructionHobby Isn't Canada the best part of the USA..
awesome but as much as this cost just buy a hydraulic one thats crazy expensive
I agree but for someone new who is unsure this is a good option to start and get their feet wet.
Wow
Nice video. But $750 in upgrades on a $500 machine? For that $1250 the 4200xl excavator might be a better choice of you can afford it all at once.
well ya since the 4200xl is on sale right now sure go for the 4200xl. but if you want to build something yourself or if you want something smaller then the Huina hydraulic might be a better option. then again you can get the new Kabolite for about $1700 or the EC160. So many choices its up to you to decide what works for you. This is just one option.
Where can you buy the 4200Xl for 1250 USD?
@@novideosnovideos544 I think that it was a black Friday promotion.