The pressure is cool. I wasn’t sure how you would know the pressures based on the low medium and firm but they have that guide and it makes it so easy!
I saw this on Amazon, about a month ago, and have it in my wish list. As soon as I have saved up for it and a mat, I'm getting it. You just reinforced my thoughts on the sturdiness on it. Thanks for the review.
The cord looks like it's a decent cord and appropriate for its size. Is the plug 2 or 3 prong? Does it have an auto shutoff? My biggest fear with buying heat presses from brands that I don't know a lot about is the electrical/fire safety aspect.
After watching this video, i purchased this machine and I did not have results like you did. I wanted to like it, but It’s very uneven. It is beautiful aesthetically, and has nice features. I thoroughly followed their directions and part of the vinyl stuck while other sections adhered. I had to repeat it 5-6 times to adhere enough where I could lift the application paper, which was way to sticky (HTVRONT brand HTV vinyl). I’m sending this machine back.
It sounds like uneven pressure was being applied. I have used this machine dozens of times now without any issues. It’s not for everyone and that’s ok. It does take some getting used to if you have never used a press like this before and if your design is larger it does require pressing in sections
@@CorinneBlackstone It was a relatively small decal at 9x6. I Pressed with a 60 lb pressure for 15-20 seconds. Just to rule this out, I did 8 in different sizes and pressure. They all did the same thing. To further test, I tried different brands of vinyl to rule out the vinyl brand with no luck. I read that this is a common issue on Amazon (purchased it there).
Did you let press heat for 5-10 minutes? Hows the humidity where your pressing? Did you pre press fabric to remove moisture? Teflon paper can hold moisture, the correct butcher paper solves that. Also it sounds like your using the incorrect transfer sheet. These problems arent machine related.
Always nice to hear a REAL review of off-brand products!!
You just sold me on this I'd rather have this than my Cricut because it shows the actual pressure that's awesome thank you for this video you ROCK!!!😊
It showing the pressure gives it a leg up on the cricut easy press. This seems like a really good option!
The pressure is cool. I wasn’t sure how you would know the pressures based on the low medium and firm but they have that guide and it makes it so easy!
I have the Raspberry Version, and I love it! So glad to hear you like it as well.
Oooo I saw the raspberry one. I love that color!
Thanks for your review! Wish I had this instead of my Cricut Easy Press because it shows the pressure needed. I love the gold, too!
I saw this on Amazon, about a month ago, and have it in my wish list. As soon as I have saved up for it and a mat, I'm getting it. You just reinforced my thoughts on the sturdiness on it. Thanks for the review.
They're offering a $15 off coupon right now.
@@FaydraDeon Yeah, I saw that. But not in budget right now, sadly.
@@BeccaCh Aw. Got it. I totally understand.
i have this one and really enjoy it and love their htv also
Their HTV is awesome also they are coming out with an autopress at the end of the month which will be a lot more reasonably priced than the Cricut one
I like this..especially showing pressure
Thank you! I’ve been eyeing this for a while
Where did you get the sheets for the design?
The htv? It was sent with the press I use starcraft softflex though www.143vinyl.com/softflex/?partner=196113
The cord looks like it's a decent cord and appropriate for its size. Is the plug 2 or 3 prong? Does it have an auto shutoff? My biggest fear with buying heat presses from brands that I don't know a lot about is the electrical/fire safety aspect.
The cord is good quality nice and thick. Three prong and yes it does have an auto off feature it will shut off with 15 minutes of inactivity
@@CorinneBlackstone Thank you!
Hi I just found your Channel 🙂Do you think I could use this for foiling card stock as per your tutorial? Thanks for sharing
Yes I don’t see why you couldn’t
I will be a brand new owner first-time heat press. THANK YOU😊 Can you heat press on wood letters? Please let me know
You can!
Can you use this with DTF?
Yes just be sure you are pressing down firmly
Hola! Me gustaria saber si funcionaria bien en tela de jeans, aiuudaaa🥺
Yes you can press any fabric with this
@@CorinneBlackstone thank you so much for iluminate me, definitely buying this right now
@@Doctorproductiv There is a $20 off coupon right now amzn.to/3ETQg4e
Thinking of buying the cricut explore air 2, can this also press on pillows and different materials?
Yes it can do any material that can be laid flat to press on
WOULD IT BE SUITABLE FOR SUBLIMATION THANKS
Yes sublimation does work with this
Hi,
Can I use infusible ink transfer sheets to decorate coasters with this , or would I be better with cricut easypress 3? 😊
Yes you can.
@CorinneBlackstone aww thank you for the superfast reply Corinne 💖
Hi Corinne Do you have links to your favorite HTV brand? can you get it on Amazon?
All my favorite stuff is linked in the video description. Pretty much everything I love is sold at www.143vinyl.com/home.php?partner=196113
how is HTVRont HTV Vinyl?
The couple I have tried are nice. I have no real complaints with it
Its become my go to vinyl it is right up there with Siser same with their glitter vinyl weeds like a dream
After watching this video, i purchased this machine and I did not have results like you did. I wanted to like it, but It’s very uneven. It is beautiful aesthetically, and has nice features. I thoroughly followed their directions and part of the vinyl stuck while other sections adhered. I had to repeat it 5-6 times to adhere enough where I could lift the application paper, which was way to sticky (HTVRONT brand HTV vinyl). I’m sending this machine back.
It sounds like uneven pressure was being applied. I have used this machine dozens of times now without any issues. It’s not for everyone and that’s ok. It does take some getting used to if you have never used a press like this before and if your design is larger it does require pressing in sections
@@CorinneBlackstone It was a relatively small decal at 9x6. I Pressed with a 60 lb pressure for 15-20 seconds. Just to rule this out, I did 8 in different sizes and pressure. They all did the same thing. To further test, I tried different brands of vinyl to rule out the vinyl brand with no luck. I read that this is a common issue on Amazon (purchased it there).
Did you let press heat for 5-10 minutes? Hows the humidity where your pressing? Did you pre press fabric to remove moisture? Teflon paper can hold moisture, the correct butcher paper solves that. Also it sounds like your using the incorrect transfer sheet. These problems arent machine related.
You are great
Thank you so much ❤️
nice video