Squaredrop Camper - POD MOD
Вставка
- Опубліковано 14 лип 2024
- This video is about redesigning the attachment method for installing my one of a kind removable camper pod onto my utility trailer. The original design utilized two quarter-inch steel cables that wrapped around the trailer frame and used turn buckles to tighten. This style allowed small movement of the pod forward and back and became undesirable. I think this new design will work great, what do you think??
Enjoy!
Living Our American Dream info:
Contact us here:
livingouramericandream@yahoo.com
Support us here:
www.paypal.me/lvngouramerican...
Tintable Raptor Liner
amzn.to/3seFwu7
Amazon Storefront:
www.amazon.com/shop/livingour...
Check out our other media site:
TikTok: @livingouramericandream
Watch all the cabin videos:
• Off-Grid Cabin Build - Розваги
Awesome design. I hate commenting on videos, everyone has an opinion and I don’t want to be that guy. Take my words with a grain of sand, I’ve really enjoyed this build series. I love that you got your Nerd On and did the calculations. I am not an engineere, but I work with them every day. Everyday they teach me the math and what it looks like on paper and I teach them practical application in field setting and we build some pretty cool stuff. So, here’s me being the arm chair opinionator. My two suggestions, use bolts on the camper side nut flange. The structural grade screws are only rated in a static application. Over time the vibrations and flex may weaken the screw interface. Using a bolt through the full 2x6, and securing it with locking hardware will give you a much stronger and more reliable attachment, even if the hole wollers out over time. Also, the hardware going into the 2x6 needs to be rated for pressure treated wood or the chemicals will corrode the hardware. Secondly, instead of 4 bolts on the trailer side through the pocket, if you used one larger bolt that would allow some slop in in the square tube when slightly loosened, you wouldn’t have to be as precise on the initial placement of the camper during installation. Thank you for sharing and excellent execution of paper ideas to functional reality.
Appreciate the feedback and thanks for watching the series!
In my shop, I call that "NUCLEAR HARDNING"!!! It means simplistic overkill! I tend to nuclear harden all of my projects. 👍👍👍
Great build. Thank you for posting
Yes i like your improvement over the cable connection. 😊 Good job on the camping pod. It even looks more secure with the brackets and bolts.
Awesome design & thank you for sharing. One of my sons is a machinists & I'm amazed at the strength of metal fasteners & structures. Growing up my Dad was an awesome fabricator but wasn't book educated so I was taught to over build everything myself, good thing gas was cheap & we didn't have to worry about the weight of something back then.
Great job! That should quiet the critics of your earlier method. Well done. 👍🏻
My concern would be flex. It’s going to be so rigid now any flex is going to split out your skids. I think a better way might be to bolt on to the sides some eyes then use turn buckles or some really short ratchet straps to attach it
4 turn buckles, one on each corner would have worked perfectly. A little less twicking to line things up. Awesome job on the trailer build
In the previous video you didn't want to worry about lineup being so precise, this looks pretty precise. I made a box for my pickup truck I used 4 turn buckles at an angle to stop the side to side but still had the flexibility of not being precise for my hookup.
I worried a bit about how tough these would be to line up but it’s easier than I thought.
Nice upgrade and a great way to protect your investment.
Excellent Job and Design!!!!!
Great job. Your wife and you make some great videos
Thank you!
looks like it is very well designed to me
Cool idea. 👍🏻
My pod sits on three 2x6 treated skids. I just used six 5/8 carriage bolts to bolt through the skids from inside and into the trailer frame. Simple. Never moves a bit and is easy to remove when I need the trailer for utility purposes.
Sweet! What size is your pod? Do you have pictures or videos of it?
That will definitely hold better than the cable system you had. The only thing I think I would have done differently would be to run the 7/8" bolt completely through the 4x6 and put the nut plate on the inside so you would capture the entire 4x6 and the load force would be pulling the nut plate tighter instead of it trying to pull the plate off of the 4x6. I highly doubt it would come apart the way you have it but I am prone to over build things.
Ficou top demais 👏
I’ve been watching your vids and you’ve inspired me to build something like this. I’m in southern ok and northern tx where summertime temps get hot hot!!! Have you thought about installing an AC and if so what ideas have you thought of? That seems to be the hardest part of my rough outline so far. I can’t decide on installing a regular window unit or a 12v system that I could power with batteries and solar in a situation where I didn’t have shore power…what to do what to do….🤷♂️🤷♂️
I have thought about it and seen a few ideas. I think my first idea would be an opening in the front where I would install the smallest window AC I could find. That location allows the unit to hang over the tongue and also puts it in a decent spot for airflow.
With your setup, its always going to be a pain to line up those bolts.
This arrangement works extremely well. It’s hard to put into words how well it works. 😏
Nice work! Do you have videos of the build s2f ? Thanks
Yeah, well, not full build videos but progress videos. Check out our channel home page and there’s a playlist
much like every engineer, you have over engineered something that was very simple fix. You could have picked up a lever synch and hooked it to a small loop on the skid and hooked it to the square 2x4 bracket holder on the trailer. And if you did it at a slight angle to the front and opposite angle on the rear, the sliding issue is solved and no more crawling on your back to secure it.
Thank you for your positive words kind sir.
That's a great design, though it seems like overkill. But I overbuild things so they don't bend or break. The only concern I have is alignment. Will you put stop blocks in so the pod always lines up, or is it easy to shift a quarter inch with a tubafore or something?
If I had a utility trailer, I'd build a pod for it similar to yours. Since I don't, I want to build a composite squaredrop trailer from scratch.
My question would be how hard is it going to be to line these bolt holes up the next time you place the pod back on the trailer after removing it. I don’t think strength will be any problem at all. Always thought the cable had room for improvement but it seemed to work. Good job if the line up is no problem. Would enjoy knowing the results
Great question, I just loaded the pod back on the trailer today and they lined up easier than I expected. Check out our TikTok page to see that video now or it will be coming soon to UA-cam too. Thanks for watching!
You stated the big bolt was a grade 5. Maybe my old eyes are off, but I believe 6 hash marks denotes a grade 8.
You’re the first one to catch my typo in the video! You are correct, these are grade 8. A little more brittle but bend less before breaking. Proof strength is way more than needed and I wanted the stiffness.
Good catch by those old eyes 👍🏻
@@LivingOurAmericanDream Yeah, I think I would have gone with eight's as well. That design is a very good example of simplistic perfection. The pod is not going anywhere.
As you get older you will start thinking "why didn't I just leave it mounted permanently on the trailer "? That's too heavy and you can purchase another utility trailer . My back thanks me all the time ! 🙃🤣👍