Awesome! Especially the SRV-tone. Very informative that you used the drive for the "amp" and the distortion in front. It was the perfect backing tone with a lead boost. Amazing that the neck pickup didn't get muddy with that fatness on the bridge pickup.
Hi Jimmy. I just got my NUX Cerberus the other day. It took a little bit of patience getting familiarized with the unit. I first had to update it to 5.1. But after that its been loads of fun. I actually purchased an IR from Celestion for a great Bluesbraker tone. Quite amazing. Thanks for sharing your presets and the demo.
Hi Jimmy! PLEASE, PLEASE, PLEASE Is it possible.. Can you make Van Halen preset and Nuno bettencourt presets... For download?? That would be great!! THANKS so MUCH! CHRIS!
Your clean sound is nice and bright. Are you applying EQ from somewhere? The cab sims in the Cerberus are good but lack treble for me. I could use an external mixer or possibly a brighter IR. Any tips would be appreciated. Thanks!
Your vidéo is very interesting regarding alls available on the Web !! Thanks for sharing the preset ...that's a very good idea for those you just begin with the pedal ...i suscribe the channel 👍
Hi Jimmy, great video!! Very nice you are wanting to share your presets with all of us, are there perhaps coming more presets available, I really like them!
Awesome Update Demo! Thanks Jimmy! Do you happen to know if you can control global tempo via USB? I would like to sync with my DAW if possible via USB...
I don't know, I never need that, because I always use the delay & reverb inside the recording software. I'll only using the drive, dist, cab sim, mod in the Cerberus when I'm recording.
the best demo I ever seen mate. I ordered mine already. To change shimmer reverb do we need its software or its CD to the computer usb? And is this shimmer reverb is permanent?
@Jimmyrocks, thanks for a great vid and cool presets! Two questions: 1: is it possible to control master output level? Mine is HOOOT... 2: how did You dial PVB -6 dB? Mine only goes from 0 to +6dB and I would Use some minus padding. Thanks!
Great sounds!! Just one question (maybe many others asked you...): is it possible to change the chain? I mean: if I want to put chorus and vibe (e.g.) BEFORE the OD/Distortion section, can I do that? Thanks!! _\m/
Hi, Jimmy, sorry to bother you again! I just purchased this unit. What do you think it's the best way to plug the cerberus into a pair of studio monitors?
Do you recommend use a clean preamp pedal when get sent direct to a mixing desk especially for clean sounds for more volume/equalization? If yes, where to add It in the signal chain? Thanks
@@jimmyrocks43 Hope you can do a Review with both soon, maybe using 4 cable method .. would be nice to see different flavors as the products seems to match really well.. thanks again
@@georgeirisarri4371 if you are using the IR output, put it in the effect loop. If you are only using the amp output, it is also fine to put it after the main output.
Sir, how do you control the noise then using the distortion? Because im using the same effect and also fender guitar, but the noiser is so big when it comes to recording with soundcard while i use the dist mode. Thank you
what do you connect cerberus? amp ? pc ?, reference monitor? . I bought one. I hooked it up to the marshall mg 50 amp but the sound is so very very bad
hi, thanks a lot for the video. Can you clarify if you had to level patch volumes after you made your patches? Or are they automatically leveled already so you're good to go?
So my question is. We need a software to make it those presets?? . Ex . In mod button you put chorus In control button you put tremolo ? Or is it possible to edit it on the fly without any laptop by pedal itself. Thank you ..
To me, I don't need anything to add in this unit. Everything you have heard is from the Cerberus only. No other pedals, preamp, even without any post sound editing.
Jimmyrocks great to hear that man..because im planning to buy this and we dont have amps in the venue..i was just worrying about the clean sound coz this one have no EQ..
@@lestoinkzzconcepcion2868 I use it straight into PA and believe me the clean sound is really bad, even after changing IRs. I use the 4 cables method with an AMT SS-11A preamp. It sounds a lot better.
You can still connect to your computer, download the latest firmware update. Then you can edit in software. But remember the usb port won't send any sound to your recording software.
Hello everyone! I am considering the purchase of cerberus. Does anyone use it with ableton? Is it possible to program presets change automatically via midi? Are there interruptions in the sound? And finally, can I have presets with reverb and others with shimmer? Thanks!
Awesome! Especially the SRV-tone. Very informative that you used the drive for the "amp" and the distortion in front. It was the perfect backing tone with a lead boost. Amazing that the neck pickup didn't get muddy with that fatness on the bridge pickup.
Hi Jimmy. I just got my NUX Cerberus the other day. It took a little bit of patience getting familiarized with the unit. I first had to update it to 5.1. But after that its been loads of fun. I actually purchased an IR from Celestion for a great Bluesbraker tone. Quite amazing. Thanks for sharing your presets and the demo.
Thank you for sharing both the Cerberus sound samples as well as the presets for free download. Much appreciated!
Beautiful demo and great playing. Thank you.
Thanks for your support. Appreciate it.
Thanks for the video! LOVE my Cerberus. This thing just sounds organic.
Awesome tones and playing! Congratulations!
Thanks for your support. Appreciate it.
Thanks for all, very kind of you ! Is there anyone, somewhere, who did something interesting with the shimmer reverb ?
Hi, awesome sounds! Is it possible o reactivate the download page? I'd love to try your tunes on my device
Great job man!!!
nice sounds and very nice playing!
Hi Jimmy! PLEASE, PLEASE, PLEASE
Is it possible..
Can you make Van Halen preset and Nuno bettencourt presets...
For download??
That would be great!!
THANKS so MUCH!
CHRIS!
Thanks! Going to load them in now.
That will be my pleasure.
Wow the cerberus is a surprisingly good effects/dist/od module. I think we have a sleeper here.
Your clean sound is nice and bright. Are you applying EQ from somewhere? The cab sims in the Cerberus are good but lack treble for me. I could use an external mixer or possibly a brighter IR. Any tips would be appreciated. Thanks!
I don't do any post sound editing for my UA-cam videos. Maybe just my pickups are brighter than yours.
Jimmy Lin (Guitarist from Taiwan) That’s true. I figured out how to EQ an IR and load it in. It’s pretty cool!
@@aaronshortmusic Hello Aaron! Please... How you do that?
Edgar Figueroa Open the IR in a DAW, apply EQ and then bounce it out again.
@@aaronshortmusic perfect! Thanks
Your vidéo is very interesting regarding alls available on the Web !! Thanks for sharing the preset ...that's a very good idea for those you just begin with the pedal ...i suscribe the channel 👍
Hi Jimmy, great video!! Very nice you are wanting to share your presets with all of us, are there perhaps coming more presets available, I really like them!
Nice job, thanks for sharing 👏🎸
Is there a noise gate in the Cerberus? With all this processing and gain I'd expect some noise, but not hearing it your sound.
Nope, I believe there's no any noise gate built in. The noise is very well controlled in this device.
Incredible video! But the link in the description is broken. Can you fix it please? Thanks!
drive.google.com/folderview?id=1jJw_q7CoGFy9UW52UUW-A9_cjg-jxsyj
@@jimmyrocks43 thanks so much! Cheers from Brazil!
Awesome Update Demo! Thanks Jimmy! Do you happen to know if you can control global tempo via USB? I would like to sync with my DAW if possible via USB...
I don't know, I never need that, because I always use the delay & reverb inside the recording software. I'll only using the drive, dist, cab sim, mod in the Cerberus when I'm recording.
Hi, how about adding a preamp pedal (4CM) on those presets? keep up the great work 💪
Thank U guy!
Cab sim and stereo output?
Cab sim only goes to the second output. the first output will always have no cab sim.
the best demo I ever seen mate. I ordered mine already. To change shimmer reverb do we need its software or its CD to the computer usb? And is this shimmer reverb is permanent?
@Jimmyrocks, thanks for a great vid and cool presets! Two questions: 1: is it possible to control master output level? Mine is HOOOT... 2: how did You dial PVB -6 dB? Mine only goes from 0 to +6dB and I would Use some minus padding. Thanks!
Please update to the latest firmware. And you can lower your output level.
@@jimmyrocks43 hey jimmy how u can make a Fuzz tone on the Cerberus? thks if u have any tips.
You have to use another fuzz pedals....
Great sounds!! Just one question (maybe many others asked you...): is it possible to change the chain? I mean: if I want to put chorus and vibe (e.g.) BEFORE the OD/Distortion section, can I do that? Thanks!! _\m/
Unfortunately you can't do it with this unit.
Hi, Jimmy, sorry to bother you again! I just purchased this unit. What do you think it's the best way to plug the cerberus into a pair of studio monitors?
Do you recommend use a clean preamp pedal when get sent direct to a mixing desk especially for clean sounds for more volume/equalization? If yes, where to add It in the signal chain? Thanks
Check out the new NUX OPTIMA Air. Just put it after the Cerberus, and you are good to go.
@@jimmyrocks43 thanks man, I appreciate your suggestion.
My pleasure.
@@jimmyrocks43 Hope you can do a Review with both soon, maybe using 4 cable method .. would be nice to see different flavors as the products seems to match really well.. thanks again
Hi Jimmy! Can you still control the boost function with the ctrl knob after the software update?
Yes, you can.
1.- How do you control the general volume of the cerberus? 2.- Can you assign different IRs 1A, 1B, 1C, 1D?... THANKS
1 with dist and drive levels
2 yes you can
Hi Jimmy great video!! I'd like to download the presets but the link doesn't work. Can you help me? Thanks again
drive.google.com/drive/folders/1jJw_q7CoGFy9UW52UUW-A9_cjg-jxsyj?usp=sharing
Try this!
Nice tone!! Question: can you put another pedal? For example a flanger? My English is very bad, I hope you can understand me.
Of course. You can put it in front of the Cerberus, or into Cerberus built in effect loop. No problem at all.
@@jimmyrocks43 if u wanna add another DELAY where it going to be conected? from the imput to the send and return?
@@georgeirisarri4371 if you are using the IR output, put it in the effect loop. If you are only using the amp output, it is also fine to put it after the main output.
Sir, how do you control the noise then using the distortion? Because im using the same effect and also fender guitar, but the noiser is so big when it comes to recording with soundcard while i use the dist mode. Thank you
I use noiseless single coils. That's why it is quiet.
Great video! Thank for the IR & Presets .. are experiencing any issues with new 5.1 firmware ?? Storing IR?
So far so good! Everything I need works perfectly!
Hey jimmy thank you so much for the video
But how can i load your presets in my nux ?
Could you please help me with this ?
Thank you
drive.google.com/drive/folders/12VxT8gm6mQD6x2QQMLSGm3eAe_yUW0_0?usp=sharing
@@jimmyrocks43 Thank you!
directly to pc??? thanks
99% of my playing, I go direct without a real guitar amp.
what do you connect cerberus? amp ? pc ?,
reference monitor? .
I bought one. I hooked it up to the marshall mg 50 amp but the sound is so very very bad
hi Jimi. the link to download doesn't work.
Check it again, I've already update the link.
Can I use the Shimmer only in the software or is possible download to the hardware?
hi, thanks a lot for the video. Can you clarify if you had to level patch volumes after you made your patches? Or are they automatically leveled already so you're good to go?
Awesome!!
Thanks~
How is the OD and DI in this all-in-one unit compare to the Boss units?
Nicely done! How do I upload your patches on my cerberus?
ua-cam.com/video/Ao017KbgiBk/v-deo.html
Check this out.
@@jimmyrocks43 your patches are broken, you can not load them to cerberus, cerberus won't load them but just stay on 0/128 forever.
Hi!
I've bought a brand new Cerberus.
Do I have to update first the v3 version of the firmware or can I go straight to the v5?
You can go straight to the newest firmware without a problem.
So my question is.
We need a software to make it those presets?? .
Ex .
In mod button you put chorus
In control button you put tremolo ?
Or is it possible to edit it on the fly without any laptop by pedal itself.
Thank you ..
You can change it without the software.
@@jimmyrocks43 thank you for answering man.. so when we want to use a shimmer ? How turn that on without software ??..
You have to use the software to replace one of the reverbs to the shimmer.
@@jimmyrocks43 oh i see man.. it would be permanently change? Cause i do not use a room reverb . So i want to replace it to shimmer
Is the edit panel (right top) from NUX?
If I buy this I can use this software, right?
Of course you can. Available free download at nuxefx.com
@@jimmyrocks43 are u using the DIST before the Ovedrive?
It depends. If I need a volume boost, I will use the distortion first, then to the overdrive. If I just need gain boost, the overdrive will be first.
@@jimmyrocks43 ok thks buddy .
My pleasure.
Dear Jimmy! How can I save the original 8 IRs before I upload your 1960?
You can recall all the build in IRs in the editing software.
Hello. What is about flanger on this pedal? Can I get sounds like distortion with flanger?
No flanger sound in this unit.
So you can upload an IR for each preset? You just have to remember what amp you use in the presets.
Are there any heavier amp models available?
Thx
The IR file that I provided for this video is pretty good for heavy stuff. You can download it for free. Link in the description 😉
Is that jimmy ir 1960 sim a wav file.? Are all the IR simulation wav files?
And did you make it on your own? How is that possible?
@@jimmyrocks43 thank you very much!
No, I just rename the file. It's easier to find it.
hi! how can I save the factory IR presets before I load up your cab IRs? Thanks
You can recall any of the build in IRs in the editing software.
@@jimmyrocks43 thanks
Have you tried it in live situation straight into Pa?
do i need a preamp pedal or the cab sim will do the job when you go direct to PA..?
To me, I don't need anything to add in this unit. Everything you have heard is from the Cerberus only. No other pedals, preamp, even without any post sound editing.
Jimmyrocks great to hear that man..because im planning to buy this and we dont have amps in the venue..i was just worrying about the clean sound coz this one have no EQ..
@@lestoinkzzconcepcion2868 I use it straight into PA and believe me the clean sound is really bad, even after changing IRs. I use the 4 cables method with an AMT SS-11A preamp. It sounds a lot better.
lepetitchose oh thank you for the tip bro..then i go with the helix or headrush gigboard😂
@@lestoinkzzconcepcion2868 you're welcome!
Hi! Is the Cerberus connected directly to your soundcard?
Unfortunately it can't. The usb port is only for update & editing.
@@jimmyrocks43 how did you connect It? Thanks :)
You can still connect to your computer, download the latest firmware update. Then you can edit in software. But remember the usb port won't send any sound to your recording software.
@@jimmyrocks43 tanks, I'd like to know how did you connect It to record the sound :)
I use Roland GO mixer
Sounds really good! Can you share the presets please?
Here:
drive.google.com/drive/folders/12VxT8gm6mQD6x2QQMLSGm3eAe_yUW0_0?usp=sharing
Thanks for all, very kind of you !
@@jimmyrocks43
Hello everyone! I am considering the purchase of cerberus.
Does anyone use it with ableton?
Is it possible to program presets change automatically via midi? Are there interruptions in the sound?
And finally, can I have presets with reverb and others with shimmer?
Thanks!
MIDI implementation in these pedals is usually for switching presets via midi switches
Does it have an amp simulator??
No, IR sim only.
@@jimmyrocks43 how can you do clean tones then?
It's only pure line signal + cab sim sound.
Great¡
Dang. This better than Gt1?
Totally different devices. You be the judge.
O som que eu tô procurando!
your presets does not work, the don't load, it stays forever in 0/128.
corrupt file or something.