MY RACEOPT T3M 2020

A short rundown of the T3M 2020 chassis after the last SERCCC Summer Series, RC4, and the last run by Sebastian of the chassis as presented. Quick guide of what was added from standard and the input from not just Seb, but also Jordan Cullis, Grant Soerono, Blair Cradick, and earlier, Michael Clarke. All good input with very good results for Seb. Included option parts: Pitlane Hobbies front top plate, 2mm version. R3 Pro on chassis steering. Pitlane Hobbies Carbon top bumper brace.

[@charlesyoung8600]

Just what I was thinking, that wolverine is the hellcat and the baybee who had a love child.

[@ThePeter710]

can you put set ups on petitrc also please

[@thalesnunes3339]

Can you tell me your impressions of this car in race?

[@RABHobbiesParkdale]

Hi, All chassis are different in the way they feel in the hands of different drivers. I like this chassis and will continue to drive it. More fo for the RAS shocks that are standard. Always playing with different setup ideas to see what it does.

[@faridhakimisalim7016]

Hye mate, where can I get the spring loaded battery holder for SNRC?

[@RABHobbiesParkdale]

Direct from SNRC only. The option battery holder we have is the PITLANE carbon locking version only.

[@rcaddictgarage]

👍

[@matthewlee3787]

You have a spider on your shoulder... 15:13

[@RABHobbiesParkdale]

I found out later in the day and freaked out. Stripped down and checked all clothing. 🥺😳😦

[@0102murphy]

Is there any downside about the car?

[@RABHobbiesParkdale]

@@0102murphy No overdramatized issues but being a pre-built chassis. It is very much recommended that the chassis be stripped down and rebuilt. The shocks need to be built with Associated Green Slime (AE1105) and re-oiled as is the diff. The best weight for the diff is 3000cst, shocks filled with your choice of CST oil.
Superglue the edges of the chassis and you're ready. The majority of complaints have been the shocks more than anything else. I do recommend that these be rebuilt.
One last checklist item is top decks. When you secure these in place, check tweak as the length of both front and rear top decks are .5mm too long as well as the screw holes possibly being tight on the screws when secured. Ream these out ever so lightly and file the ends of both top decks.