That's a hell of a job you did there. My 10 year old modern Starrett square is very rusty, but still dead accurate. You have inspired me to give it a makeover :)
Hahaha yeah, I have a huge bin of socks for use as rags! I never just throw them out. I’m still compelled though to use each one until it’s a grimey black crust. :) Thank you for watching!
That had to be incredibly satisfying! I have a very similar tool, identical except for the manufacturer. Mine wasn't in quite so rough shape, a little crocus cloth on the blade is as far as I took it. but now you've got me thinking... 😉😂
Nice resto. I'm gonna try to clean up an old Stanley combination square that my dad bought in the 70's. It's not in terrible shape but there's enough rust that the ruler doesn't slide and the set screw doesn't work well. It really just needs de-rusting and some polishing. Sadly I don't have access to a sandblaster so I'll just have to apply old-fashioned elbow grease.
@@RestoreThis - Wow - I'm afraid of using sandpaper and losing the fine etching of the lines and numbers. You seemed to do it with ease. I've seen people use brute force and just sand blast them clean with whatever type of material they use but I don't have that kind of equipment. May just have to experiment. Now I understand why there are so many squares missing the rulers. :)
Thank you for watching! For the ruler I used black paint and kinda globbed it on.I let it dry a little bit then wiped it gently. I stuck in the crevices and wiped off of the flat polished part.
The blasting media I’m using is the 80 grit glass bead from harbor freight. I’m sure there’s better stuff but that’s what I’ve been using since I got the blast cabinet
I'm working on the same square exceptional job! You are missing the scratch awl though mine still has the scratch awl I was a little too excited about that haha question the title says starrett copy do you know the actual brand?
Very cool! Sadly I was never able to determine the manufacturer. Not fir lack of trying though. I spent hours looking through google image search results and was never able to find a perfect match. That’s cool that yours has the scratch awl still! Thank you for watching and best of luck on your project!
I have a couple of the same squares. Mine are Union brand. Purchased by Millers Falls in the late 50s or 60s and still marketed under the Union name until Millers Falls went out of business.
Bardzo dobra robota. Ładnie wszystko wypolerowałeś i pomalowałeś. Mam pytanie, po prostu ciekawi mnie jedna rzecz, ty te rzeczy sobie zachowujesz czy sprzedajesz? Bo gdybyś zaczął sprzedawać to twoje hobby mogło by się stać źródłem Twoich dochodów, a to zwykle bywa bardzo trudne. A tu masz idealne warunki.
Witam i jak zawsze dziękuję za oglądanie! w odpowiedzi na Twoje pytanie po prostu zachowuję wszystkie te elementy, które przywracam. Zawsze mówię ludziom, ile czasu zajmie wykonanie jednego z tych elementów, musiałbym naliczyć więcej, niż ktokolwiek byłby skłonny zapłacić za jeden z tych przedmiotów! hahahah. Myślałem o zapewnieniu usługi przywracania przedmiotów innych osób, ale na razie wolę po prostu zachować to jako hobby. jeszcze raz dziękuję za nieustające wsparcie przyjaciela!
Great restoration of a simple but essential tool for every tool box.
Thank you for watching Thomas!
Wow oh wow 😮
That's a hell of a job you did there. My 10 year old modern Starrett square is very rusty, but still dead accurate. You have inspired me to give it a makeover :)
Nice job! I was especially impressed with the multiple uses of the sock!!! 😆
Hahaha yeah, I have a huge bin of socks for use as rags! I never just throw them out. I’m still compelled though to use each one until it’s a grimey black crust. :) Thank you for watching!
Nice job! I have a bunch of my Father's old tools that I hope to restore ... I am 71, so the tools I have are at least that old HAHA
Thank you for stopping by! That’s very cool Bill! Sounds like potentially some really neat items to breathe new life into!
That had to be incredibly satisfying! I have a very similar tool, identical except for the manufacturer. Mine wasn't in quite so rough shape, a little crocus cloth on the blade is as far as I took it. but now you've got me thinking... 😉😂
It was quite satisfying to clean it up and get it working again! Thank you so much for checking out my video and dropping by!
Great work.
Thank you Kelvin! I hope your having a great weekend!
Good job
Thank you for the encouragement and for watching Valmont! Have a great rest of your weekend!
Nice resto. I'm gonna try to clean up an old Stanley combination square that my dad bought in the 70's. It's not in terrible shape but there's enough rust that the ruler doesn't slide and the set screw doesn't work well. It really just needs de-rusting and some polishing. Sadly I don't have access to a sandblaster so I'll just have to apply old-fashioned elbow grease.
You don't necessarily need sandblaster. Use wire brush of different sorts instead.
Where do you get the bubble vials
How did you install the level keeper?
The replacement fit snug enough so I just gently tapped it in, then installed a plug to hold it in and keep it from moving. Thank you for watching!
There should be a spring under the screw that will keep the rule under tension during the time that adjustments are made.
Good looking out. I’ll have to find one and add it. Thank you for watching!
Saludos desde México quedo excelente
Me puedes decir q tipo ácido o q liquido usaste para quitar el óxido
Gracias
Where did you get the replacement vial?
I got a pack of them off of Amazon. Probably not the best quality, but they work and are close enough to the right size to do the job
Can you please share what grits you used when polishing the ruler... if you remember?
I started out with 200, 400, 600, 800, 1000, 1500, 2000, 2500 then finally 3000 grit. It was a lot of sanding but it was worth it!
@@RestoreThis - Wow - I'm afraid of using sandpaper and losing the fine etching of the lines and numbers. You seemed to do it with ease. I've seen people use brute force and just sand blast them clean with whatever type of material they use but I don't have that kind of equipment. May just have to experiment. Now I understand why there are so many squares missing the rulers. :)
Nice, alot of guys skimp on the ruler.. would of loved to see how you redid the black number scale on it.. Thanks for sharing!!
Thank you for watching! For the ruler I used black paint and kinda globbed it on.I let it dry a little bit then wiped it gently. I stuck in the crevices and wiped off of the flat polished part.
whys that lathe rattling around like that?
I’m working on doing the same and wondering what type of blasting compound you used? Thanks for the great video!
The blasting media I’m using is the 80 grit glass bead from harbor freight. I’m sure there’s better stuff but that’s what I’ve been using since I got the blast cabinet
Thank you so much for watching!
Very nice restoration! How accurate was it when you finished? What did you do to improve the accuracy?Thank you .
It was actually pretty accurate. Just dialing in the sliding sight and it was spot on
I'm working on the same square exceptional job! You are missing the scratch awl though mine still has the scratch awl I was a little too excited about that haha question the title says starrett copy do you know the actual brand?
Very cool! Sadly I was never able to determine the manufacturer. Not fir lack of trying though. I spent hours looking through google image search results and was never able to find a perfect match. That’s cool that yours has the scratch awl still! Thank you for watching and best of luck on your project!
I have a couple of the same squares. Mine are Union brand. Purchased by Millers Falls in the late 50s or 60s and still marketed under the Union name until Millers Falls went out of business.
Looks great! How accurate is it? It would be a shame not to use it. Well done 👍
Seems pretty accurate compared to my 6 footer and 8 footers! Thank you for stopping by!
Bardzo dobra robota. Ładnie wszystko wypolerowałeś i pomalowałeś. Mam pytanie, po prostu ciekawi mnie jedna rzecz, ty te rzeczy sobie zachowujesz czy sprzedajesz? Bo gdybyś zaczął sprzedawać to twoje hobby mogło by się stać źródłem Twoich dochodów, a to zwykle bywa bardzo trudne. A tu masz idealne warunki.
Witam i jak zawsze dziękuję za oglądanie! w odpowiedzi na Twoje pytanie po prostu zachowuję wszystkie te elementy, które przywracam. Zawsze mówię ludziom, ile czasu zajmie wykonanie jednego z tych elementów, musiałbym naliczyć więcej, niż ktokolwiek byłby skłonny zapłacić za jeden z tych przedmiotów! hahahah. Myślałem o zapewnieniu usługi przywracania przedmiotów innych osób, ale na razie wolę po prostu zachować to jako hobby. jeszcze raz dziękuję za nieustające wsparcie przyjaciela!
@@RestoreThis Dziękuję za odpowiedź. Miłego odnawiania kolejnych przedmiotów (:
Holy crap. That lathe sux.
Hahah yup! It may not be good but it sure was free :)
Nice job. That rule is mid quality at best though. Nowhere near Starrett.
I'm just happy to get it working again! Thanks for the feedback!