Best Slicer Settings For Cookie Cutters

[@anzelikahaberli2868]

New Cura interface change:
* Setting "Bottom Pattern Initial layer" at 1:00 is no longer under Shell, but under Top/Bottom -> "Bottom Pattern Initial Layer"

[@54wannabeangel]

I can't find it?

[@brookeh635]

I would love to see a video on how to design stamps!! Or pattern rolling pins!!

[@jonilmasepulveda]

me too! maybe patterns!

[@wendylloyd8669]

I'm having trouble with the walls splitting, or double walls as I can it. Can you help me correct this issue? Thank you so much Wendy Lloyd

[@BenjaminWolfe78]

Thanks! This helped a ton with my walls separating on my cutters.

[@roxannegil5539]

You're a life saver and not know it. Took me forever to get settings going and they been good until the inside wall was rough. Got a different filament and those codes were not working for this one. I put the same settings as yours and I can't love you enough ☺️

[@isabelmarroquin4503]

thanks so much for this video. I have had problems with my first prints and was able to print my first cutter succesfully after watching this video! thanks so much. God bless!

[@susan3156]

I really appreciate you sharing your process and settings. I’m new to 3D printing and am wanting to make my own cutters for my pottery business because paying others to make them for me is getting so costly that I may as well buy a printer. So thank you 🙏

[@mariokampmeier3639]

Thank you so much for this video. I ruined four prints with different settings, but this time my cookie cutters come out great.

[@chelseaallen3597]

I would love to see a video on how to do a beveled edge for the cutters to help with the sharp clean cut if your interested lol. Or if you would like to share what CAD program you use to design in. I love making jewelry so much that I bought my own 3D printer to create and print my own clay cutters only to find the whole design process is not so simple. This video is wonderful, it has helped my prints TREMENDOUSLY!! Thank you for all your help. Your awesome!!!

[@chupness]

I looked everywhere for a tutorial on how to do a beveled edge and couldn't find any.
So Instead, I reduce the top 3 mm of my cutting blade from 1.2 mm to .5 mm.
Gives it a nice thin cutting edge.

[@marydhanyalouisa]

@@chupness hi i tried it too at .5mm but it seems to not print that layer...it remains empty when previewing on cura :( any help would be appreciated.

[@chupness]

@@marydhanyalouisa are you printing with a .6mm nozzle? I print with a .4mm nozzle and it prints out .5 just fine for me. and Cura shows it in the preview

[@MDPDIY]

Yo estoy pensando en comprarme una también para ese mismo uso, pero veo que no hay mucha información sino para cortadores de galletas.

[@Artisan855]

It would be nice to have this updated to the latest Cura Version of 4.11. Not all of these settings show in this video.

[@MsCookiemonster1995]

LOVE this thank youuuuuu so much!!!!!

[@jonilmasepulveda]

New 5.1 Cura updated?

[@SnoringVids]

Dude!! These videos are awesome! Did you move onto another channel?

[@saimakhurram3028]

hi , i want to know whts the best settings for making 3d printed stamps with perfect finish no blobing ets no lines plus can u tell me wht is this ironing feature, thanx

[@Overly_nourished_entity]

Thanks for the tips! Any advice on getting the walls all the same thickness? I made my clay cutters 0.06mm thick but some spots are thicker than others 🤷🏻‍♀️

[@chanelhealley4905]

Good day, thanks for sharing the settings for cura, can I please have the settings as on this video it is very blury to see and to fast to change by my side

[@user-vi8fc2vt8v]

Your video was very helpful...as a newbie....however, I used these settings, then realized you are using them with PLA. I'm using PETG. I have a lot of webbing and "boogers". I am having a lot of trouble finding help. What would you suggest?? Thank you!

[@user-ql9rv7qu4p-2]

Thank you!! Can you do an edge on your cookie cutters ?

[@autisticChronicles360]

I'm trying to print some Cookie Cutters, but I keep getting a line where the widths change, which is the main breaking point of the cutter when stress is applied. Any tips on how to fix this?
Software: Ultimaker CURA 5.0 (it also happened in CURA 4.13)
Printer: FLSUN V400, was tuned to print cleanly (for the most part).
Also, I use a skirt, mainly just to ensure the lines are laying down correctly (and so I can live level to make it perfect before the mesh).

[@jacevillegas3891]

I need help. Why does my 3d printer keep moving the z axis up so high from the bed? It does it mid print and always messes it up.

[@briannapreston-alpers8130]

What version of cura is this? I’m having so many problems getting prints to load and print

[@yessicagonzalez8445]

Hi there I need some help with my ender 3d printer can you help?

[@PrismClayCo]

So I just changed my settings to these and it sped up my prints ALOT. Which I like. However about 5 minutes into the build, the nozzle lifted to about 1 cm above the bed and kept extruding. I dont know WTF happened and what I need to fix it. Help pleaaaase.

[@meganjacobs3049]

There are gaps in the walls of my cutter! How do I fix that?

[@Mags53]

Can I ask what your z offset is at?

[@selrosehogarth7588]

I have trouble with my seams especially on round cutters .Any tips?

[@wendylloyd8669]

I'm having the same issues. Did you get the settings figured out to stop this issue?

[@karenmckenzie8465]

Link for PLA?

[@dalilasamson7160]

Hello, with Cura I have Shell 4x 1.6 thickness and my cookie cutters are not very sturdy :-((

[@cookiecutterexperts5069]

interesting. And yeah, it's hard getting that perfect profile what causes no stringing, sturdy walls, and a smooth print. Each day we try to improve our profile. One day we will get it perfect then I'll put up a second video on cura, lol

[@erlydvargas2535]

Thank you ! I think my biggest issue is that I’m using silk I’m about to print with your settings let’s see

[@tanyay9863]

@@cookiecutterexperts5069 I’m getting strings and have no idea how to fix it. Would love a video on fixing that. Thank you so much for these setting reveals :)

[@chelseaw830]

@@tanyay9863 it could be an under extrusion issue. Check for clogging in your nossle, look over your extrutor

[@roxannegil5539]

If you fool around with tinkercad before cura, I have my first layer at 17 with hole. Second layer is 16, and third layer is 4. Was 5 but it does fine at 4. Only thing I mess with in cura are my dimensions as far as x,y, and z. I have my cutters at 112 in height or width depending which is longer with uniform scaling checked off. After it scales, I uncheck and have my z at 16

[@jonilmasepulveda]

Do you have an update?

[@everestpatel8307]

Do you pay for this software?

[@54wannabeangel]

Cura is free!

[@maryjuckett6357]

Can anyone help me, my pla isn't sticking to board, what am I doing wrong?

[@chupness]

either reduce or increase your bed heat in small increments . you may have to play around with it a bit to find the right setting.
Another suggestion is cover your build plate in blue painters tape. That really helps with adhesion

[@maryjuckett6357]

@@chupness Thank you, I will try this information.

[@chelseaallen3597]

your bed leveling could be off by just a mm and that's enough to pick up the initial filament layer and drag it around making a mess. I've learned this the hard way.

[@roxannegil5539]

I put hairspray, it sticks fine

[@GmKiam]

Pla+ is food safe man??

[@radioku5e362]

You are not cooking in the PLA, so yes. PLA is made from corn and/or sugarcane starch. PLA itself is food safe, however, once printed it has many voids (fear of bacterial growth) on the surface which would make it not food safe if the material you are cutting is not to be cooked (cooking would kill bacteria). These should be washed in lukewarm water with an antibacterial soap. Additionally I keep mine in the freezer to make sure no bacteria can grow between uses. The PLA is not what you have to worry about. It is the print nozzle you need to worry about. Brass can have lead in it as part of the alloy, so stainless steel is a must, and the OP is using stainless steel.