Jim did the survey on my 1985 Grady White Seafarer 22 a few years ago. He was very thorough and fun to talk with. I had already purchased the boat, but in order to get it insured, the insurance company needed a marine survey. I had done a lot of work on the boat after I purchased it, and before Jim surveyed it. He offered me some very good advice about wiring, and he pointed out some delamination of the front deck that I had not found on my own. I live in CT, not far from where Jim lives, and he is a legend in this part of the world.
I'd love for you to keep making these survey videos and cover the entire sailboat. This is very good information that every sailor should know. I've not come across another channel doing this yet. I think you are on to something.
Another very interesting look at the nuts and bolts (and valves) of sailboats. Fascinating stuff. I never gave a second thought about sailing until I got sucked into the Captain Q vortex. One thing to remember about any personal project involving a used anything...It is very important to actually use the thing for its intended purpose. In this case...don't wait until your boat is perfect before using it. The projects will never end and eventually, if all you do is work on it, your new love will become just another chore. I learned this the hard way from working on project vehicles. Also...try focus on one project at a time. Completing a small chore provides a lot more satisfaction than starting, and not finishing, a bunch of chores. Once it's safe and reliable, get some fun out of it. The smiles are the fuel that will keep you motivated.
Randy, this is a very good series. Jim is quite competent. I really appreciate your effort. I encourage you to continue this type of content. Include all systems eventually. Bravo
Surveyor saved me thousands on my boat. Had agreed to a sales price pending survey, post survey renegotiated over 15K less to fix issues with boat. Survey is worth every penny!
You were right - this one is also a tour de force! Everyone who’s considering buying a boat needs to watch this. It’s too easy to fall in love with your dream boat, only to find out later that it’s rotting from the inside out. On the bright side, when a competent surveyor gives it the thumbs-up, you are on your way to all the the exciting times you hoped for, and hopefully none of the hidden nightmares. So my question is, Randy, did you get a surveyor to go through your boat like this before you wrote the check? Either way, I’m enjoying this series immensely. Many thanks!
Jim, very well explained. All good to know for us looking for a boat. Gives us a guide to narrow down the search before we hire the surveyor for "the one".
Knowledge is awesome! I would like to hear about screwed down teak decks and can damage can be foretold without ripping out the headliner? Leaking toe rails too! We see a lot of weepagae around bun holes on deck and if being teak is screwed down, does that mean your screwed. This series is bad ass Randy!
Thank you for this informative instructional video ... from what I have learned is for a boat to be fully inspected it would need to be lifted out of water ... only then can a proper survey be done ... so much to consider in order to fully get a clear picture on the condition of a boat ... so important ... but the right thing to do ... 😊😊😊
Great thing about getting a quality surveyor is that you are going to know everything that the boat is going to need right away and in the next few years. They've been doing it and have seen the progression of a issue. Starts out a small crack and ends up without proper care being a nightmare for someone
This is good information for the new buyers. It's easy to get into a never ending project without this knowledge and if you are up for a "project" then this is a great way to start your tick list. Great stuff Randay...
I like this new evolution of your channel. Even more informative than before. Great work. Thanks for your effort. (I do still like the boat reviews- this new direction is just a bonus) I likely will be buying a great lakes sailor within the next couple of years.
Just love the channel!!!! Where is Captain Q? Learning so much I will probably get kicked out of the next boat yard I visit for pointing at stuff....LOL
As someone who would like to get a sailboat later on in life, I will definitely be referring to these videos when I begin the search!! Awesome series Editing to add because I almost forgot... Jim is a well of knowledge. Very knowledgeable and nice to see him on the channel
I'm been out of the design engineering for decades. (Now a consultant @ a much higher level) HOWEVER, before I would design an idea, I would sit down with the maintenance person / department and just ask question. Best day or 2 always..... Every question I would have developed with out the interviews they answered with a reason(s) way. Just a word to the wise. If you or your company wants to develope a new design, sailboat, motorboat,ship, polymorane, airplane, jet, space etc... sit down with these guys and just listen for days .. weeks if possible .. it will save you or maybe the life of your company.
Couldn’t agree more. If you caught our visit with Walter Schulz, founder of Shannon yachts, he spent over a decade maintaining boats and then went on to design many of the details on his boats to be easily maintained (e.g. removing all tanks could be done with basic tools). I always feel wiser listening to the wisdom and expertise from these experts
@@YachtHunters lol it is not that common that things are functional and simple... it's hard work to find the correct solution. Keep up the great work. Some day soon I will put my wife in a dementia home but until then I will live and image the possibilities OF SAILING . THANK YOU.
Randy, Enjoying this series! It looks like you and Jim have been looking only at fiberglass boats. How different would the process be for a wooden-hulled boat? Does that require a different kind of surveyor?
Where you found that de-lamination with no water intrusion is it OK to fill that with resin after you let it dry for a while? Keep the good stuff coming Randall.
Hi, thanks Randal for such a terrific video and also for introducing us to Jim! Very insightful and extremely helpful for someone such as myself, who is actively looking for a cruising vessel to live on but only has limited knowledge. I stumbled across this site and am so glad that I did - I am now a subscriber 🙂
Fantastic series! A point about winged keels and grounding. I had a 30' Hunter with a winged keel. Sadly she broke her mooring during a hurricane and was beached. I live on the Bay of Fundy with its 29' tides and when she beached on he port side the port wing about 10 - 12" dug into the sand and gravel and wheat the tide came in and tried to lift her, the winged keel secured itself like an anchor and the lifting forces were so great that she broke her back. We only discovered the break when we lifted her with a transit lift and water was leaking out of the keel and when the yardman pushed on the keel, it swung big a pendulum. Had we craned her onto a trailer we would not have discovered the keel had failed. The boat was a total write-off.
Thank You, Randall And Jim! The thing that I like about surveyors is that they are compelled to only tell the truth. Presented with no bias. I found Alan Vaitses book at a yard sale and you could tell that it hadn't even been read... maybe a little dry for most readers. But after going through it a few times, I realized that it had information that you couldn't find written down Anywhere else. That book was about the basics, without any complications like electronics, battery killers (inverters), or other modern gimmicks (tailgates come to mind). These surveyors have Forgotten more of their knowledge than the rest of us will ever know. But this is supposed to be the "find a sleeper channel". Part one had a comment about "ok, so we spent the whole video looking at shafts!". Let's move on, lets get to the meat and potatoes! Happily, this video expands beyond the mundane and into the fascinating world of Ballast. Maybe this is a little much after all. And I have noticed that some yacht brokers sweat bullets around surveyors. So let's move on already, if you could just do a video on rudder bearings and quadrants please first? Thank You
Thanks Marty! Now I want to find a copy of that book to see what else I can pick up to advance my position on the educational learning curve. We plan go over the rest of the boat step by step… seems like you have your own stash of good tips to share from your experience. Always great to have you pop in with some tips
@@YachtHunters This is part of Jim's Legacy. However many of these he can afford to do will definitely be appreciated. Personally, I often need to think about what I see before I know what to do about it. Walter touched on this briefly. I'm (We're?) super into learning because once we're off soundings we know that anything can go south at any time, and how we rig our own boats really could mean life or death. The more we learn, the more sense everything makes, and we realize the boat isn't a bunch of stuff thrown together a la carte. It's a machine that depends on everything working together. Sorry I don't have any tips today ok maybe one, Plastic thru hulls at the waterline or above (like a shower sump line) exposed to light can break off when you aren't looking, if they're more than a few years old. The outside flange comes off as a ring, the barb or threaded part falls off inside. You can guess the rest. Thank You Randall
Jim is really informative. I’m curious when it comes to new/newer boats, what does jim think in terms of how manufacturing has improved? Is there a company who has paid attention to the quality of their builds?
Great videos. Question for Jim, at 16:55 of the video there is red paint missing all around the hole. Is this a sign of bad maintenance of the hull paint and possible source of moisture damage to the hull. Thanks.
Is that a steel hull? Because if it is then why is the thru hull bronze? But that thru hull has no outside flange, unless it's a "countersunk" flush flange. But what about the visible seam, around the hole on the outside, that looks like the "spigot only" part of a modified thru hull, screwed into hull plating from the inside? That's probably not a flush flange. Translation: What is it? It just looks spooky. Thanks.
So informative and such important topics related to monies spent on ones recreational investment. Thank you Ran-Day for your efforts and keep up the action..
Question for Jim... Will surveyors open floor boards and closed compartments? If not, how do we get around this for a proper inspection? Example mast step plates and chain plate coverings.
Too bad this kind of video wasn't available when I bought my first sailboat in the 80's. It turned out okay but that was dumb luck.. A segment on how to pick a reputable, competent surveyor would be helpful. Thanks for the video.
You’re such fun. Made me laugh a few times. Very smart too. I have learned a lot from your videos. Thank you. Generally boats mean $ signs LOL. In Australia we rarely see boats on the hard as we don’t have the good winters as such. So we have to dive to find out about Prop Rudder and Keel.
hahaha great to hear! What great fortune to be able to sail all year-round.... just make sure you don't forget to dive once i awhile otherwise you'll get a big sealife beard on your hull :)
@@YachtHunters we are certainly blessed to be able to sail all year round. The boats come out once a year for anti foul etc and have regular divers as we race all year. Wednesday afternoons. Friday Twilights. Saturdays in summer and Sundays in winter as well as a heap of annual regattas. Channels like yours certainly take my learning to the next level. So appreciative. Note to self - must buy a plastic mallet. 🔨
Ha thirty years in the Marine industry and I know that almost every rudder older than 10 years is wet!! Fortunately I'm in the freshwater market were the fail rate goes way down.
I always drilled holes in the bottom of my rudder at the end of every season. Some water would come out and the "on the hard" time allowed it to dry out. I just plug the holes every spring with thickened epoxy. I suspect water was coming in through the top of the rudder.
Ran-dayy, I have a question. When looking for a quality surveyor what license or qualification or schooling is the best and or what should we ask for when shopping for a quality surveyor? Im sure a boat sales company will have their own beloved surveyor which is perhaps as picky as needed
In my experience with balsa cored boats and centerboard trunks etc. is: eight coats of epoxy paint on the inside and outside are required to keep water out!!!! Water is a universal solvent and can turn a solid fiberglass hull into a flacid erectile dysfunctional trash heap! 8 COATS starting with barrier coat/primer, 4 coats, then 4 top coat layers! any questions?
I would like to get a cape dory 27 or 28 but can't make my mind which one. ie diesel vs outboard in a well. Mostly coastal cruising. Thoughts? Pro/Cons of both appreciated.
Can Jim address some concerns on aluminum hulls and keels? I know the market favors fiberglass, however I think Norwegian and Antarctic sailing is safer with aluminum even though it costs much more.
Actually my son in law just did the nwp in 47’ FG sloop ..with no issues relating to integrity the build. Apparently all the other passage makers they encountered were in aluminum or steel . He had no issues. His story will be published by National Geographic in book and film. Look for it this summer
Brand new subscriber and wannabe boat owner. These inspection videos are wonderful ...here's my stupid question: how are these inspections done if the boat is in the water?
Happens all the time. All depends on how long the water has just been sitting there. Unfortunately there's no X-ray nor MRI way to look inside to know exact condition.
Good idea to invite surveyor expertise !.Could you include following topic : mast stability?! what to look for ,difference of fixed on deck , hull ,tabernacle ?
I couldn't understand why it makes any difference which nut goes on first, so i Googled it. It makes sense! Look at the threads on a propeller shaft, grooves cut into the metal. Between the crests of each thread is a V-shape whose sides are called flanks in engineering speak. When you put a nut onto a shaft, notice as it turns its way up the shaft, the nut is doing so by pushing against the outer flanks of each thread as it winds its way up towards the propeller. When the nut bottoms out against the hub of the propeller, and you tighten the nut snug with a wrench, the nut is tight because its internal threads are firmly seated against the outer flanks for as many threads as the nut covers. Proper installation begins by installing the half nut first and tightening it just snug enough to “preload” the half nut onto the shaft against the prop hub. Tight but not with all your weight on it. Then the thick nut goes onto the shaft. When it reaches the half nut, this is where the engineering magic happens. With a second wrench on the half nut to keep it from turning, you continue to tighten the thick nut against the half nut. As one applies more torque to the larger nut, which has twice as many threads and is therefore more powerful, the thick nut begins lifting (or unloading) the half nut off the outer flanks of the shaft threads. As you fully tighten the thick nut, the half nut releases its pressure on the outer thread flanks and is pushed hard against the inner thread flanks and against the prop hub. The two nuts are effectively now pushing against each other, and they will stay that way forever. The greater number of threads of the larger nut means it will always win this contest, also because the half nut has nowhere to go. The two nuts will not come off due to vibration or engine use. Ding a blade and the nuts will stay tight. Have a cutless bearing back out and you will have other things to worry about in the vibrating chaos that follows, but not about losing the propeller. That happened to me once in the Caribbean…another story. The purpose of the prop nuts is to make sure the propeller stays seated snugly against the shaft taper. In normal operation, prop nuts don’t really take much load anyway, as thrust from the engine keeps the propeller pushing onto the shaft. In reverse there may be some load on the nuts but that is temporary and nothing to worry about. So why make a big deal about these two nuts, and the order of how they are installed? Because it is the proper way to do it, and that is reason enough.
That’s the nuttiest reply we have ever had !!! But I love the engineering behind it Give the man a giant seegar ! Thank you for taking the time to research and share Do you have a link to your google discovery?🤗
Jim did the survey on my 1985 Grady White Seafarer 22 a few years ago. He was very thorough and fun to talk with. I had already purchased the boat, but in order to get it insured, the insurance company needed a marine survey. I had done a lot of work on the boat after I purchased it, and before Jim surveyed it. He offered me some very good advice about wiring, and he pointed out some delamination of the front deck that I had not found on my own. I live in CT, not far from where Jim lives, and he is a legend in this part of the world.
I'd love for you to keep making these survey videos and cover the entire sailboat. This is very good information that every sailor should know. I've not come across another channel doing this yet. I think you are on to something.
Yes, yes.
Could not agree more!! So valuable, and despite 10,000 YT sailing channels this is pretty much an untapped channel niche.
And judging his reaction, most will probably enjoy the chance at the conversation...
Guys like Jim are rare, and unfortunately a dying breed. I'm my experience, most surveyors are worth a happy meal.
Another very interesting look at the nuts and bolts (and valves) of sailboats. Fascinating stuff. I never gave a second thought about sailing until I got sucked into the Captain Q vortex.
One thing to remember about any personal project involving a used anything...It is very important to actually use the thing for its intended purpose. In this case...don't wait until your boat is perfect before using it. The projects will never end and eventually, if all you do is work on it, your new love will become just another chore. I learned this the hard way from working on project vehicles.
Also...try focus on one project at a time. Completing a small chore provides a lot more satisfaction than starting, and not finishing, a bunch of chores.
Once it's safe and reliable, get some fun out of it. The smiles are the fuel that will keep you motivated.
I don’t know about asking Jim a question. I just want to take him with me to every boat I look at! What a knowledgeable man!
I hope Jim gets more business for his time showing and explaining this information on the channel. Thanks Jim and Randy. 👍
Randy, this is a very good series. Jim is quite competent. I really appreciate your effort. I encourage you to continue this type of content. Include all systems eventually. Bravo
I can hardly wait to see a part 3!
This series is massively invaluable - a big ‘thank you’ to Jim and Randy!
Surveyor saved me thousands on my boat. Had agreed to a sales price pending survey, post survey renegotiated over 15K less to fix issues with boat. Survey is worth every penny!
Excellent… yeah a quick pays-for-itself risk reducer… great to hear 👍
You were right - this one is also a tour de force! Everyone who’s considering buying a boat needs to watch this. It’s too easy to fall in love with your dream boat, only to find out later that it’s rotting from the inside out. On the bright side, when a competent surveyor gives it the thumbs-up, you are on your way to all the the exciting times you hoped for, and hopefully none of the hidden nightmares.
So my question is, Randy, did you get a surveyor to go through your boat like this before you wrote the check?
Either way, I’m enjoying this series immensely. Many thanks!
Jim, very well explained. All good to know for us looking for a boat. Gives us a guide to narrow down the search before we hire the surveyor for "the one".
Knowledge is awesome! I would like to hear about screwed down teak decks and can damage can be foretold without ripping out the headliner? Leaking toe rails too! We see a lot of weepagae around bun holes on deck and if being teak is screwed down, does that mean your screwed.
This series is bad ass Randy!
Thanks UK… we’re excited people are enjoying it so we’ll continue on with the rest of the boat.. stay tuned and thanks for watching
Thank you for this informative instructional video ... from what I have learned is for a boat to be fully inspected it would need to be lifted out of water ... only then can a proper survey be done ... so much to consider in order to fully get a clear picture on the condition of a boat ... so important ... but the right thing to do ... 😊😊😊
"That should be a dollar sign" Gave me a good laugh on that one, thanks.
😁
Love this bottom up coverage on the sailing boat. very informative.
Thank you, Hilmar!
Great thing about getting a quality surveyor is that you are going to know everything that the boat is going to need right away and in the next few years. They've been doing it and have seen the progression of a issue. Starts out a small crack and ends up without proper care being a nightmare for someone
This is a great series 👍
Much appreciated Bryan!
Besides the good one liners, this perfectly illustrates the value of a thorough, professional survey.
This is good information for the new buyers. It's easy to get into a never ending project without this knowledge and if you are up for a "project" then this is a great way to start your tick list. Great stuff Randay...
Fabulous show. I'm retiring in a year and saving to buy an old sailboat. This series will be invaluable to me. Thank you and Blessings.
I like this new evolution of your channel. Even more informative than before. Great work. Thanks for your effort. (I do still like the boat reviews- this new direction is just a bonus) I likely will be buying a great lakes sailor within the next couple of years.
Just love the channel!!!! Where is Captain Q? Learning so much I will probably get kicked out of the next boat yard I visit for pointing at stuff....LOL
He’s busy getting sea dog through obedience school… pointing is better than using the hammer and random boats! 😂
These videos are so great and educational Randy. My best to you and the Captain!
Hey randaay - absolute winner with this format - well done mate
I love listening to Jim's vast experience, it's always very interesting...
And thanks Randay for posting Jim's contact info. ..
As someone who would like to get a sailboat later on in life, I will definitely be referring to these videos when I begin the search!! Awesome series
Editing to add because I almost forgot... Jim is a well of knowledge. Very knowledgeable and nice to see him on the channel
thanks very much! Jim will be back to cover more of the survey items for future episodes... fun stuff! thanks !
Hope we do not loose knowledge like this. Guys like this are SO undervalued...
jim will be back this spring to continue the series. he's the best!
Great to see a show like this for all us who love old boats.
Glad you liked it. Thanks!
I understand better now why having a surveyor check out a boat is a win win decision! Great lesson, well done to all. SkipRay.
This series is awesome! Thanks Jim and Ran-Day 😁
I'm been out of the design engineering for decades. (Now a consultant @ a much higher level) HOWEVER, before I would design an idea, I would sit down with the maintenance person / department and just ask question. Best day or 2 always..... Every question I would have developed with out the interviews they answered with a reason(s) way. Just a word to the wise. If you or your company wants to develope a new design, sailboat, motorboat,ship, polymorane, airplane, jet, space etc... sit down with these guys and just listen for days .. weeks if possible .. it will save you or maybe the life of your company.
Couldn’t agree more. If you caught our visit with Walter Schulz, founder of Shannon yachts, he spent over a decade maintaining boats and then went on to design many of the details on his boats to be easily maintained (e.g. removing all tanks could be done with basic tools). I always feel wiser listening to the wisdom and expertise from these experts
@@YachtHunters lol it is not that common that things are functional and simple... it's hard work to find the correct solution. Keep up the great work. Some day soon I will put my wife in a dementia home but until then I will live and image the possibilities OF SAILING . THANK YOU.
Excellent! Please more of these!!!
Amazing work! So useful to better understand possible issues! Thank you!
Glad you liked it, Bernard!
Awesome explanation! Very helpful!
I could watch this dude all day!!
I find these videos extremely helpful. Thank you Jim.
Randy, Enjoying this series! It looks like you and Jim have been looking only at fiberglass boats. How different would the process be for a wooden-hulled boat? Does that require a different kind of surveyor?
Wow! 1:33 in, and already I've learned something new. Jim could have his own channel. Seriously.
Where you found that de-lamination with no water intrusion is it OK to fill that with resin after you let it dry for a while? Keep the good stuff coming Randall.
Excellent footage Ran-Day and Jim,. Thumbs up, as I am learning to buy more confidently
Great series. This needs its own play list.
Hi, thanks Randal for such a terrific video and also for introducing us to Jim! Very insightful and extremely helpful for someone such as myself, who is actively looking for a cruising vessel to live on but only has limited knowledge. I stumbled across this site and am so glad that I did - I am now a subscriber 🙂
Welcome aboard, Steve. Glad to hear it was helpful.. there’s more on the way. Cheers!
Learning all kinds of things. Thanks
Great to hear!
Great episode. Much education. Thanks Ran-Day !
Thanks, slyvain!
Fantastic series! A point about winged keels and grounding. I had a 30' Hunter with a winged keel. Sadly she broke her mooring during a hurricane and was beached. I live on the Bay of Fundy with its 29' tides and when she beached on he port side the port wing about 10 - 12" dug into the sand and gravel and wheat the tide came in and tried to lift her, the winged keel secured itself like an anchor and the lifting forces were so great that she broke her back. We only discovered the break when we lifted her with a transit lift and water was leaking out of the keel and when the yardman pushed on the keel, it swung big a pendulum. Had we craned her onto a trailer we would not have discovered the keel had failed. The boat was a total write-off.
Interesting series Ran-day. Thank you and Jim!
Another video packed full of good info.
Glad you enjoyed it! Thanks
Question:
I’ve always wondered if sailboats primarily sailed on freshwater (Great Lakes) do better or worse when it comes to these problems.
Excellent! Can we expect a part 3, topside and interiors?
Working on it… thanks
Very informative show thanks Randal
Wow, Jim has a ton of knowledge. Lord! I wonder how someone gets started in marine survey. Are there apprentices?
Thank you very much for the education. Important, interesting and well presented.
What a great series. Thanks.
Omg been waiting for this part 2.
Thank You, Randall And Jim!
The thing that I like about surveyors is that they are compelled to only tell the truth. Presented with no bias.
I found Alan Vaitses book at a yard sale and you could tell that it hadn't even been read... maybe a little dry for most readers. But after going through it a few times, I realized that it had information that you couldn't find written down Anywhere else. That book was about the basics, without any complications like electronics, battery killers (inverters), or other modern gimmicks (tailgates come to mind). These surveyors have Forgotten more of their knowledge than the rest of us will ever know.
But this is supposed to be the "find a sleeper channel". Part one had a comment about "ok, so we spent the whole video looking at shafts!". Let's move on, lets get to the meat and potatoes! Happily, this video expands beyond the mundane and into the fascinating world of Ballast.
Maybe this is a little much after all. And I have noticed that some yacht brokers sweat bullets around surveyors. So let's move on already, if you could just do a video on rudder bearings and quadrants please first?
Thank You
Thanks Marty! Now I want to find a copy of that book to see what else I can pick up to advance my position on the educational learning curve. We plan go over the rest of the boat step by step… seems like you have your own stash of good tips to share from your experience. Always great to have you pop in with some tips
@@YachtHunters This is part of Jim's Legacy. However many of these he can afford to do will definitely be appreciated.
Personally, I often need to think about what I see before I know what to do about it. Walter touched on this briefly.
I'm (We're?) super into learning because once we're off soundings we know that anything can go south at any time, and how we rig our own boats really could mean life or death. The more we learn, the more sense everything makes, and we realize the boat isn't a bunch of stuff thrown together a la carte. It's a machine that depends on everything working together.
Sorry I don't have any tips today ok maybe one,
Plastic thru hulls at the waterline or above (like a shower sump line) exposed to light can break off when you aren't looking, if they're more than a few years old. The outside flange comes off as a ring, the barb or threaded part falls off inside. You can guess the rest.
Thank You Randall
Jim is really informative. I’m curious when it comes to new/newer boats, what does jim think in terms of how manufacturing has improved? Is there a company who has paid attention to the quality of their builds?
This was the most interesting video l have seen for a long time.
Much appreciated, CNA! Cheers
Great videos. Question for Jim, at 16:55 of the video there is red paint missing all around the hole. Is this a sign of bad maintenance of the hull paint and possible source of moisture damage to the hull. Thanks.
Is that a steel hull? Because if it is then why is the thru hull bronze? But that thru hull has no outside flange, unless it's a "countersunk" flush flange. But what about the visible seam, around the hole on the outside, that looks like the "spigot only" part of a modified thru hull, screwed into hull plating from the inside? That's probably not a flush flange.
Translation: What is it? It just looks spooky. Thanks.
So informative and such important topics related to monies spent on ones recreational investment. Thank you Ran-Day for your efforts and keep up the action..
great videos- Thanks = Mauro . . . .and Jim looks like a great perso too
Thanks for posting and sharing.
Thanks for watching!
Thanks Team Q and mighty the mighty Jim, l’ll be coming to the US to buy a cracking yacht . Love the passion and content . Beers 🍻 up lads
Great vid Randy & Jim. Thank You.
Thanks for watching!
Question for Jim... Will surveyors open floor boards and closed compartments? If not, how do we get around this for a proper inspection? Example mast step plates and chain plate coverings.
Yes of course. They open up everything.
Congrats🎉🎉🎉to my favorite UA-camrs
Thanks Rick!
Fabulous information. Please cover every part of a boat.
That’s the plan! Glad you enjoyed it 👍👍 thanks
Very informative, thank you so much!
I really enjoy this show
I hope the captain is ok? Ive re-watched all your old yacht hunting episodes. Love getting the captain Q's take on older boats.
Thank you Mark
I sure enjoy these informative lessons
Too bad this kind of video wasn't available when I bought my first sailboat in the 80's. It turned out okay but that was dumb luck.. A segment on how to pick a reputable, competent surveyor would be helpful. Thanks for the video.
Umm, can you do more of these & I'll reach out to Jim directly. Thank you!!!
Not all surveyors are the same. Jim seems great, I read some surveys that were a joke so to speak.
Another excellent lesson. Thanks
Great information, Thank you for making these video's
Glad you like them! thanks DK!
You’re such fun. Made me laugh a few times. Very smart too. I have learned a lot from your videos. Thank you. Generally boats mean $ signs LOL. In Australia we rarely see boats on the hard as we don’t have the good winters as such. So we have to dive to find out about Prop Rudder and Keel.
hahaha great to hear! What great fortune to be able to sail all year-round.... just make sure you don't forget to dive once i awhile otherwise you'll get a big sealife beard on your hull :)
@@YachtHunters we are certainly blessed to be able to sail all year round. The boats come out once a year for anti foul etc and have regular divers as we race all year. Wednesday afternoons. Friday Twilights. Saturdays in summer and Sundays in winter as well as a heap of annual regattas. Channels like yours certainly take my learning to the next level. So appreciative. Note to self - must buy a plastic mallet. 🔨
Ha thirty years in the Marine industry and I know that almost every rudder older than 10 years is wet!! Fortunately I'm in the freshwater market were the fail rate goes way down.
Randay...what did you do to the Captain Q?
Fascinating!
I always drilled holes in the bottom of my rudder at the end of every season. Some water would come out and the "on the hard" time allowed it to dry out. I just plug the holes every spring with thickened epoxy. I suspect water was coming in through the top of the rudder.
Ran-dayy, I have a question. When looking for a quality surveyor what license or qualification or schooling is the best and or what should we ask for when shopping for a quality surveyor? Im sure a boat sales company will have their own beloved surveyor which is perhaps as picky as needed
Great show!
I love this information
Great videos, thanks
In my experience with balsa cored boats and centerboard trunks etc. is: eight coats of epoxy paint on the inside and outside are required to keep water out!!!! Water is a universal solvent and can turn a solid fiberglass hull into a flacid erectile dysfunctional trash heap! 8 COATS starting with barrier coat/primer, 4 coats, then 4 top coat layers! any questions?
sounds like an insurance place to coat in epoxy...
I would like to get a cape dory 27 or 28 but can't make my mind which one. ie diesel vs outboard in a well. Mostly coastal cruising. Thoughts? Pro/Cons of both appreciated.
I used to have a Bristol 33. Nice Boat !
love the bristols.... great, long-lasting boats! cheers
Many thanks 🙏
Can Jim address some concerns on aluminum hulls and keels? I know the market favors fiberglass, however I think Norwegian and Antarctic sailing is safer with aluminum even though it costs much more.
Sure can… and if you plan on heading north having aluminum or steel is a great idea. Thanks!
Actually my son in law just did the nwp in 47’ FG sloop ..with no issues relating to integrity the build.
Apparently all the other passage makers they encountered were in aluminum or steel . He had no issues. His story will be published by National Geographic in book and film. Look for it this summer
@@YachtHunters Would you let us know when his story is released? Thank you
Brand new subscriber and wannabe boat owner. These inspection videos are wonderful ...here's my stupid question: how are these inspections done if the boat is in the water?
Can you drill a hole in the bottom of a rudder to drain the water, then just seal it back up after?
Happens all the time. All depends on how long the water has just been sitting there. Unfortunately there's no X-ray nor MRI way to look inside to know exact condition.
Excellent!
What about "blisters" on fiberglass hulls?
Im absolutely buying a moisture meter...
Interesting stuff. How did he become a surveyor?
Good question… we’ll definitely ask him!
👍 as always. BTW, what happened to Captain Q ?!?
Good idea to invite surveyor expertise !.Could you include following topic :
mast stability?! what to look for ,difference of fixed on deck , hull ,tabernacle ?
Great ideas… thank you!
I couldn't understand why it makes any difference which nut goes on first, so i Googled it. It makes sense!
Look at the threads on a propeller shaft, grooves cut into the metal. Between the crests of each thread is a V-shape whose sides are called flanks in engineering speak. When you put a nut onto a shaft, notice as it turns its way up the shaft, the nut is doing so by pushing against the outer flanks of each thread as it winds its way up towards the propeller. When the nut bottoms out against the hub of the propeller, and you tighten the nut snug with a wrench, the nut is tight because its internal threads are firmly seated against the outer flanks for as many threads as the nut covers.
Proper installation begins by installing the half nut first and tightening it just snug enough to “preload” the half nut onto the shaft against the prop hub. Tight but not with all your weight on it.
Then the thick nut goes onto the shaft. When it reaches the half nut, this is where the engineering magic happens.
With a second wrench on the half nut to keep it from turning, you continue to tighten the thick nut against the half nut. As one applies more torque to the larger nut, which has twice as many threads and is therefore more powerful, the thick nut begins lifting (or unloading) the half nut off the outer flanks of the shaft threads. As you fully tighten the thick nut, the half nut releases its pressure on the outer thread flanks and is pushed hard against the inner thread flanks and against the prop hub. The two nuts are effectively now pushing against each other, and they will stay that way forever.
The greater number of threads of the larger nut means it will always win this contest, also because the half nut has nowhere to go. The two nuts will not come off due to vibration or engine use. Ding a blade and the nuts will stay tight. Have a cutless bearing back out and you will have other things to worry about in the vibrating chaos that follows, but not about losing the propeller. That happened to me once in the Caribbean…another story.
The purpose of the prop nuts is to make sure the propeller stays seated snugly against the shaft taper. In normal operation, prop nuts don’t really take much load anyway, as thrust from the engine keeps the propeller pushing onto the shaft. In reverse there may be some load on the nuts but that is temporary and nothing to worry about.
So why make a big deal about these two nuts, and the order of how they are installed? Because it is the proper way to do it, and that is reason enough.
Fantastic homework job… you’re hired for our research department… that makes even more sense now. Well done & cheers!
That’s the nuttiest reply we have ever had !!!
But I love the engineering behind it
Give the man a giant seegar !
Thank you for taking the time to research and share
Do you have a link to your google discovery?🤗
Thank Jim for us, please
will do. thanks!!
Magic. Thanks