What has to be considered when manufacturing the gears? 1. Is there a positional reference of the spur gears to each other? Tooth on tooth or gap on gap? 2. Is there a positional reference of the spur gears to the worm wheel?
I thought the principle behind the torsen differential is that a wheel gear cannot turn a worm gear. It looks like you're doing that here, by you turning the axle shaft (wheel gear). Maybe the worm gear doesn't have enough pitch? Maybe a little more resistance is needed somehow? But what a genius design!
There is flaw in his design. Housing for worm gears should be connected to what he calls Top Axle Slot in his 3d files. It should also be connected to big gear which in his files is called big pan gear. All of those three (housing, big pan gear and top axle slot) should rotate while "torsen locks itself"
@@rossfilbrun6525 the shafts are meant to lock up when one loses traction. Due to the backlash and tolerances in the gears, they spin in opposite direction. In a real Torsen Differential they won't be able to spin opposite directions
@@ronitpithani2661 I think this is normal in a torsen differential, when you rotate the axes in opposite directions, they rotate with an open diff, but when you lock an axis and rotate the box, it blocks, or i will be wrong. could have shown this in the video
The files for this on thingverse are wrong. the axle splines are to small and to many for the splines on the sungears also the sungears are too tall for both to be put inside the gear housing. even one at a time as is directed
You know our hearing works just fine... There is no need to cramp up the volume of the soundtrack. Something not so energetic worked just fine for this video
Very. So many video makers set out to do two things at once, entertain with "music" and educate. So one interferes with the other. It's distracting, so, detracting, so Irritating.
You can press "M" for mute. Or lower the volume. Or lower the volume in your operating system. Or turn your speakers down. Any of these are preferable to leaving negative comments on the internet on a video that is not even about the music.
@@neilbarnwell Or I could be honest and risk “offending someone” or “melting a snowflake.” By the way, there aren’t really any “safe spaces”, so thank you for engaging because communication is important and I’m sure you follow you own advice and aren’t a hypocrite like some.
Excellent.
What better way to see knowledge and understanding take shape and work than 3D printing
Way to go 👍
Thank You, I am working on a planetary differential now
Good........👍👍
Dude! That music is fucking awesome. Really made the video so much better.
MUY BUENA EXPLICACION....MUCHAS GRACIAS.👍👍👍👍👍
What has to be considered when manufacturing the gears?
1. Is there a positional reference of the spur gears to each other? Tooth on tooth or gap on gap?
2. Is there a positional reference of the spur gears to the worm wheel?
If you want a headache after this video, do not turn down the volume, and make sure to watch this video with headphones.
I thought the principle behind the torsen differential is that a wheel gear cannot turn a worm gear. It looks like you're doing that here, by you turning the axle shaft (wheel gear). Maybe the worm gear doesn't have enough pitch? Maybe a little more resistance is needed somehow? But what a genius design!
It can turn it. But not under load
I think when you spin one axle it essentially locks the differential so power still goes to the non-slipping wheel.
There is flaw in his design. Housing for worm gears should be connected to what he calls Top Axle Slot in his 3d files. It should also be connected to big gear which in his files is called big pan gear. All of those three (housing, big pan gear and top axle slot) should rotate while "torsen locks itself"
Beautiful. How long did it take you to design this?
Sideshaft has a 32 teethes, but spurgear has a 24. How am i supose to connect them?
Awesome!
Thanks!
Awesome man. Not sure what planet the downvoters are from haha.
Thank you
Down voters there's a reditor in our midst
Could you print Torsen of type C？
Quick question. Should the wheels only be able to spin opposite directions for a limited time? It looked like about 1/2 a revolution in the video
By wheels are you talking about the Shafts or the Gears?
@@ronitpithani2661 The shafts
@@rossfilbrun6525 the shafts are meant to lock up when one loses traction. Due to the backlash and tolerances in the gears, they spin in opposite direction. In a real Torsen Differential they won't be able to spin opposite directions
@@ronitpithani2661 I think this is normal in a torsen differential, when you rotate the axes in opposite directions, they rotate with an open diff, but when you lock an axis and rotate the box, it blocks, or i will be wrong. could have shown this in the video
@@franciscorodr7966 I will be sure to post a new video highlighting this thanks for the advice
If you turn just one axel and hold the case the other axel turns the opposite way or stays locked?
Yes The Torsen differential locks both axles when one axle is locked .
@@ronitpithani2661 could have shown it in the video, it would be interesting to see
@@franciscorodr7966 I will be sure to post a new video thank you for the advice
excellent video friend, where could I find the file of the model? I just need something like that for my project
Sorry for the late reply I have been busy with school
In the description, If you would like the step file or fusion 360 file I can email it to you
@@ronitpithani2661 any chance you could email me the fusion 360 file? jack.dontspam@gmail.com thanks so much if you can
@@jackhughes7041 sure I can email you
@@jackhughes7041 Hey I sent an email did you receive it.
@@ronitpithani2661 ITS BEEN 8 MONTHS DID HE GET IT I HAVE TO KNOW
Will this work in my mustang?
The files for this on thingverse are wrong. the axle splines are to small and to many for the splines on the sungears also the sungears are too tall for both to be put inside the gear housing. even one at a time as is directed
Is the music Emaralds?
I think it is "rising sun" from the youtube library
You know our hearing works just fine...
There is no need to cramp up the volume of the soundtrack.
Something not so energetic worked just fine for this video
Music has me feeling like I just witnessed the birth of the universe.
Agencia en costaRica, teléfono
Good but annoying BGM..
Very. So many video makers set out to do two things at once, entertain with "music" and educate. So one interferes with the other. It's distracting, so, detracting, so Irritating.
1червяк накрылся меняй все 6 дорого.
Damn disgusting “sound/music”
Agreed, I had no idea what to use
@@ronitpithani2661 No it´s perfect
You can press "M" for mute. Or lower the volume. Or lower the volume in your operating system. Or turn your speakers down. Any of these are preferable to leaving negative comments on the internet on a video that is not even about the music.
@@neilbarnwell Or I could be honest and risk “offending someone” or “melting a snowflake.” By the way, there aren’t really any “safe spaces”, so thank you for engaging because communication is important and I’m sure you follow you own advice and aren’t a hypocrite like some.
@@ronitpithani2661 thank you for understanding my point sir. I didn’t mean to offend. I figured you didn’t compose that piece .