IKEA MICKE Corner workstation assembly

Поділитися
Вставка
  • Опубліковано 10 лис 2024

КОМЕНТАРІ • 49

  • @흰토끼모피오
    @흰토끼모피오 3 місяці тому +3

    It is now 2024. I watched your video and it helped me a lot. Thank you so much!!!😀👍

  • @ammarisrar2005
    @ammarisrar2005 2 роки тому +32

    This was more helpful than the actual directions IKEA gave with the table 😂

  • @MooodyDawe
    @MooodyDawe Рік тому +6

    Thank you so much sir. You were with us the whole way. This was a team effort. Well done us! Xx

  • @settleluna7692
    @settleluna7692 3 роки тому +5

    Thank you so much for this. It’s been so helpful to me. I’ve never built anything before & this video saved me🤣💗

    • @ggcc5764
      @ggcc5764 3 роки тому

      did u try to build it ? tell me your experience please

    • @settleluna7692
      @settleluna7692 3 роки тому +2

      @@ggcc5764 I actually did it. This video really did help & got it all done in an evening. The instructions were clear (the workstation was 2nd hand so no instructions) and my daughter is thrilled

    • @ggcc5764
      @ggcc5764 3 роки тому +1

      @@settleluna7692 Great, I will buy it next week. I think I can do it by myself. thank you for reply ^^

    • @settleluna7692
      @settleluna7692 3 роки тому +1

      @@ggcc5764 glad I could help. Hope all goes well x

  • @sare14331
    @sare14331 3 місяці тому

    ممتاز

  • @karlayanez1213
    @karlayanez1213 11 місяців тому

    Very very Helpful. Thank You!!!

  • @harindersharma4366
    @harindersharma4366 3 роки тому +1

    Thank you soooooooo much first we spent 2 hours trying to figure it out but when we saw your video within 30 minutes done thank you !

  • @parkny
    @parkny 3 місяці тому

    감사합니다. 2시간 소요했습니다😂

  • @물탄쿨피스
    @물탄쿨피스 10 місяців тому +1

    한국에서도 조립했어 고마워 멋쟁이ㅎㅎ

  • @MarMar-qk9qt
    @MarMar-qk9qt 10 місяців тому

    the screws won’t tighten and it’s loose any advice?

  • @francomtberlin2031
    @francomtberlin2031 3 роки тому +1

    Sarap mg assemble ng ikea furniture.. kaso lockdown pa..nd pa mkpasyal sa shop

  • @catsclouds9275
    @catsclouds9275 Рік тому +1

    Awesome content thanks a lot! ❤😊

  • @alainkohnu2096
    @alainkohnu2096 10 місяців тому

    Hi! Thanks for your video! I’m planning to buy this desk. Would you tel me if an iMac would fit in the corner? Mine is a 27’’ screen which is 65cm large. Thanks for your help!!

    • @lunarwvrld911
      @lunarwvrld911 9 місяців тому

      hi where do you buy this desk in the ph? is it available at the official ikea store

  • @meuyfowsaephanh
    @meuyfowsaephanh 8 місяців тому

    I've already had it built. I'm moving and it's too big for the doorframe. Any tips on disassembly? Preferably on how to separate the top section from the bottom for easy moving.

    • @Drehw
      @Drehw 6 місяців тому

      I'm facing the same problem. Can you please tell me how you moved the table through the doorframe?

  • @Jupiter-on4iq
    @Jupiter-on4iq Місяць тому

    Guys be *careful* doing this, wear appropriate shoes especially when handling the back plates. I sliced my foot open while installing them and had to get stitches because there’s a hidden metal piece in between the back boards.

  • @OfficialRoses
    @OfficialRoses 2 роки тому

    might get this, thanks for the video

  • @mariajinkytv3888
    @mariajinkytv3888 3 роки тому +1

    Galing naman po.. keep on sharing po your skills.. Keep safe

  • @kerlynpadilla9642
    @kerlynpadilla9642 2 роки тому

    thank you so much this was super helpful 🙏🙏🙏

  • @RalsYT
    @RalsYT 10 місяців тому

    stucl at step 25 i think one of the 4 boards i got is wrong beacuse one of them doesnt have a bunch of holes on each side

  • @namankhare7650
    @namankhare7650 Місяць тому

  • @mimyalicia3257
    @mimyalicia3257 2 роки тому

    Thank you so much!!

  • @Patriking.
    @Patriking. 2 роки тому

    Grazie molto utile tuo video

  • @sarahamalmixvlogtv1816
    @sarahamalmixvlogtv1816 3 роки тому +1

    gling nio nmn gumawa ng ganyan kuya bilis nio gumawa po

  • @shegolden9963
    @shegolden9963 Рік тому

    i put one piece wrong and the screw got stuck and it won’t come out what do i do helpp

  • @Rawan-gu5gk
    @Rawan-gu5gk 6 місяців тому

    Thx

  • @lunarwvrld911
    @lunarwvrld911 9 місяців тому

    Hello po! Can I ask where you can purchase this IKEA desk here in the Philippines? It's not showing up on the PH IKEA Website. Would really appreciate any reply sir.

  • @stalki05
    @stalki05 2 роки тому

    Thaaaaaanks so much !!

  • @AlicePelaez21
    @AlicePelaez21 3 роки тому +1

    galing.. naol.. #cristah tv

  • @mubarakabbas
    @mubarakabbas 3 роки тому +2

    Hi Phinoy, is it advisable to buy a 3 year old one for 3k

  • @larrymiller7128
    @larrymiller7128 Рік тому

    Salamat po

  • @jocelynemartinengoya8829
    @jocelynemartinengoya8829 2 роки тому

    Thanks

  • @therealsamasima
    @therealsamasima 2 роки тому +1

    Had to come here cuz the fucking instructions are wrong at step 10

  • @miked6523
    @miked6523 Рік тому

    Salamat

  • @jancheema6776
    @jancheema6776 3 роки тому +1

    Thk u. nj-usa