Ford Focus P287A Diagnosis | Hard Shifts, No Reverse
Вставка
- Опубліковано 16 жов 2024
- Clutch/Fork replacement with NO SPECIAL TOOLS!
• Ford Focus Dual Clutch...
How to remove the transmission at home, in the driveway:
• Ford Focus Transmissio...
Clutch job on a lift: • Ford Focus Clutch & Fo...
Input shaft seal replacement:
• Ford Focus/Fiesta Dual...
How to tighten clutch nuts, step by step:
• How to Tighten Ford Fo...
How to make your own clutch handle for pulling/installing:
• Make Your Own Clutch P...
Transmission reinstallation at home:
• Transmission Reinstall...
Dual Clutch OEM Clutch & Fork Kit: amzn.to/47GMeIl
Clutch/Fork replacement with NO SPECIAL TOOLS!
ua-cam.com/video/EIJt9anfdSM/v-deo.htmlsi=jRDZpqr8DN9kDWeA
How to remove the transmission at home, in the driveway:
ua-cam.com/video/UBeWfEXdYLc/v-deo.htmlsi=18JzeOFt2Pv2fVTp
Clutch job on a lift: ua-cam.com/video/D-Kmh8Wj56s/v-deo.html
Input shaft seal replacement:
ua-cam.com/video/8o4pqLBt4Pg/v-deo.htmlsi=l8v1ejNLO6eRYOrI
How to tighten clutch nuts, step by step:
ua-cam.com/video/-JWakCz0pa0/v-deo.htmlsi=0JB8Tj0FsbcJSV1W
How to make your own clutch handle for pulling/installing:
ua-cam.com/video/swV2EX805zk/v-deo.htmlsi=PYaY_Nnl7QmlugQ7
Transmission reinstallation at home:
ua-cam.com/video/UQ5u7PngpjM/v-deo.htmlsi=wEfsPSjl2bEaNTJz
Dual Clutch OEM Clutch & Fork Kit: amzn.to/47GMeIl
my wife has a 2012 ford focus, and transmission just started acting up and no reverse at all now. when you take off it jerks from 1st to 2nd and just not going over 45mph, I put my Fixd scan on it, and this is the 3 trans codes that comes up. P287A, P090D, and P087A. Also some other codes that are, J1850 But engine code is U1007, and B10D7 Pats key, and U0300, P144A. But right now Im more want to know if you might know the problem with transmission, does she need another one, as a used one is expensive. We Just don't know what to do now. Any help from you would be great. Thank you.
@@blade75964 I would swap the actuators A and B top to bottom to see if the codes change to the opposite clutch to confirm actuator failure. You can also do a clutch fork test
Did someone already told you that you sound like Mr Garrison from South Park with the ''Humm ok!''😁😂🙃
@@malibuss66 hahaha
You must find drilling top and bottom and flush the Dust with brake cleaner, expect a video on that
Hey Ben, I talked to you on a different video and told you my issues with my 17 focus, limp and no reverse, and two codes, P2387 (shift fork B position) and P287B shift for calibration not learned. Well my question is, I drained my transmission. Fluid in the fluid has a lot of metallic shavings, non-ferrous guessing aluminum, Do you know what all that could be from? I got a new transmission case and I dropped the transmission today and I'm going to change that case out because I'm afraid the tab is broken off. But I'm really worried about the aluminum spirals in the fluid and I just don't know what it is
You can take pictures and post them in my discord or facebook group if you'd like.
I had issues with my actuator it was clutch B I ordered OEM and it took care of the problem. How many miles on this vehicle in the video?
Hi, glad you got it fixed. It had 60k miles
Bonjour
Il est aussi possible de le faire sur une Ford focus 2015?
yes, any focus with the DPS6 dry dual clutch
Hello, are the shift forks of Fiesta's same with Focus 2.0? Or they are diff? Can we use same shift forks on both? Thanks! Cheers!
Yea they're interchangeable. Thanks for watching!
@@BigBensCarsAndCycles nice! Thanks!
If it wasn't for the popping sound, I would have tried the brake cleaner trick, and blast that fork spline, turn once, blast again, turn once, blast, over and over, and see if it frees up, in hopes it's just excessive clutch dust buildup packed in there. What's the milage again?
Hey. 61k. But it's 6 years old
I tried doing the penetrating oil trick and the fork fell apart internally and free spins now lol
Yea, that one got left full of dust too long. 😄 How much ya wanna bet that owner creeps in rush hour traffic? @@BigBensCarsAndCycles
@@BigBensCarsAndCycles Sometimes you'll get the fork to free up, however i've found if they won't slide back and forth in your hand, theyll still bind up when driving and you get shudder. They may move ok with the spline tool but they need to move freely when you're physically moving the fork slide by hand back and forth.
If you were to rotate the gear and the forks moved in and out smoothly would you then think the clutch is OK?
Yeah I would swap actuators to see if it changes to the other clutch
Ben , I have the same code on my car so basically I need a new transmission.
Would this still stop your car from starting my focus ain't starting and has this code on..please lmk
Hello did you fix your car I'm kinda in the same boat
Hey so I did the wd40 trick to try and get the fork unstuck. But it worked a little too well and what I’m guessing to be the entire fork bolt? Unscrewed. Does this mean I’m screwed and need to rebuild my transmission , or is there anyway I can just screw this back in and be fine? I have a 2018 Focus SEL if that helps with anything.
Also if I have to replace the stuck clutch B, do I need to rebuild the entire transmission or is that just good to do while I already have it out? Thanks in advance!
@liljpg4740 hi, sounds like the fork is damaged. That happened to me when doing the wd40 trick once. Replacing the forks, clutch and slave cyl will be enough. Ford Focus & Fiesta Clutch / Fork kit amzn.to/48ppwVJ
@liljpg4740 Hi, I have the same situation, can you tell me if I change the fork it will solve the problem?
@@РостиславІгоровичФлінта I’m currently in the process of changing the forks and clutch and all that in the transmission and I should be done around Monday. So I’ll let you know then!
Is this can cause intermittent start after long parking?
Yes
Hey I have the same problem.
Did anyone get a fix to it?
What did you do?
@AndrewOkpattah if you want to join the discord I'll be happy to help 1 on 1
@@BigBensCarsAndCycles sure
I'd be glad
My Ford fucus 2016 has the same sound " cla cla cla," and i have to start the car on neutral. The reverse rear works, but when i drive the car, the first rear resolution goes up too high, and them a warning ⚠️ comes out hot transmission stop for 5 minutes
Hi, probably a seized A-Fork for the clutch
So I have to change the clutch
@@huntpointnighthd2125 yeah what codes are in it
Will the newer 17 18 tcms work on a 2014?
Yes. Just program the 14 calibration into it. Same way you would program a new Ford tcm
Link for the clutch reset tool
amzn.to/4bJL8Pl
My car is making the same noise & I have the same code
I replace full clutch today with same code. Still Remind
@@sara78130 swap actuator A with actuator B and see if thencode changes to the other clutch
I did boss same problem @@BigBensCarsAndCycles
😢
@B igBensCarsAndCycles I return with rachet 14 times. Then relse look work fine.
Mmmkay 😂😂😂😂