If I remember there were some screws inside the back of the frame on the sides around the light panel when you open the front door. But don’t quote me cause it was 3 years ago.
I know this is an old video but here goes. The inner door diagram and instructions will get moldy and splotch over time. I would either clear tape over them and cut away ao it looks clean or clear it. It will eventually erode if not protected. Scotch guard maybe?
I don’t really remember. I think if I recall there was some semi hidden screws on the inside edge along the Coke logo. Sorry it’s a few years. I do recall it was pretty easy.
It has been a long time, but I believe there is some screws along the inside edge of the light frame. There might be a seal or something you have to pull back to expose the screw heads.
You are awesome to reply and so fast brother !!!! I so appreciate that… I’m a few adjustments away to vending in my kitchen from identical machine I used to visit daily at the Apco station On the corner by the home I grew up in …. Prying it out looks like it is the way but your advice will save headache and prying damage I lknew couldn’t be right … thank you so very much from Camano Island Wa, Jimmy Buffett lifestyle here as often as humanly possible 😉
I have one, and there is a wire hanging down that looks like a bulb goes in it. Do you jave an idea of where that goes? What is the starter for the florescent bulb, and how do you get to the lights on the right side of the door?
I’m not sure about the wire hanging and I never had to mess with the lights on the door. I just bought a new flourscent bulb and a new Regent Fluorescent Starter for the main logo light and that got mine working. Sorry wish I could help more.
You may have to pry open the old lock with a screw driver and replace the entire lock. You can buy replacement lock mechanisms for it. when I bought my machine it had no lock at all and I found the replacement on ebay for for about $30.00.
@@recordball Thanks. I actually found the button that turns on the light and discovered the bulb actually works. I'm not learning how to set the coin mechanism.
Did you figure out how to open up the billboard on the top (the piece with the huge coca-cola logo on front)?
If I remember there were some screws inside the back of the frame on the sides around the light panel when you open the front door. But don’t quote me cause it was 3 years ago.
I know this is an old video but here goes. The inner door diagram and instructions will get moldy and splotch over time. I would either clear tape over them and cut away ao it looks clean or clear it. It will eventually erode if not protected. Scotch guard maybe?
How much do these go for? I have a V-90 in pretty great working condition. Thanks, great work!
I sold it for $1200 but that was like over a year ago. I would imagine now it could be almost double that the way things are going these days.
How did you replace the bulb for the coke sign I have one exactly like that one but the bulb went out
I don’t really remember. I think if I recall there was some semi hidden screws on the inside edge along the Coke logo. Sorry it’s a few years. I do recall it was pretty easy.
Can you tell me how you accessed the fluorescent bulb and starter … my coke sign exactly as yours doesn’t want to just pry out .. any advice for me???
It has been a long time, but I believe there is some screws along the inside edge of the light frame. There might be a seal or something you have to pull back to expose the screw heads.
You are awesome to reply and so fast brother !!!! I so appreciate that… I’m a few adjustments away to vending in my kitchen from identical machine I used to visit daily at the Apco station On the corner by the home I grew up in …. Prying it out looks like it is the way but your advice will save headache and prying damage I lknew couldn’t be right … thank you so very much from Camano Island Wa, Jimmy Buffett lifestyle here as often as humanly possible 😉
I have one, and there is a wire hanging down that looks like a bulb goes in it. Do you jave an idea of where that goes? What is the starter for the florescent bulb, and how do you get to the lights on the right side of the door?
I’m not sure about the wire hanging and I never had to mess with the lights on the door. I just bought a new flourscent bulb and a new Regent Fluorescent Starter for the main logo light and that got mine working. Sorry wish I could help more.
@@recordball thanks. The regent florescent starter really helps. Now I know a little more of what I am looking at.
I have a vendo HA56-B can’t unlock it any suggestions?
I have the H-63F, the one that takes cans.
I have a vendo HA56 - B can’t unlock it
Any suggestions?
You may have to pry open the old lock with a screw driver and replace the entire lock. You can buy replacement lock mechanisms for it. when I bought my machine it had no lock at all and I found the replacement on ebay for for about $30.00.
Very Nice! How did you access the light bulb for the sign?
I forget to be honest. I think there was 2 screws on the side behind the plastic panel if I recall??
@@recordball Thanks. I actually found the button that turns on the light and discovered the bulb actually works. I'm not learning how to set the coin mechanism.
is time for sale?
Sold!