The DIY $100 Powder Coating System...NEVER LOOKED SO GOOD!!
Вставка
- Опубліковано 8 жов 2019
- Huge THANK YOU! to our Sponsors:
- Hornblasters (Lime = 10% OFF)
- Speed Pole (6.7Lime = 10% OFF)
- Jax Wax Car Care (LIME = 15% OFF)
- VooDoo Ride (Ryan10 = 10% Off)
- Pedal Commander (lime10 = 10% OFF)
- Ridge Wallet (Mayer = 10% Off)
- Retro Shop LLC
- South Bend Clutch
- Wehrli Fab Custom (6.7lime = FREE SHIP)
- Flo-Pro Performance Exhaust
- Rolling Big Power (RBP)
- Aux Beam
- VanTrue
_
30 Days of FREE Amazon PRIME!! : goo.gl/EzssTg
_
Links: ⛓
Detailer: amzn.to/2NZWxDB
Shampoo: amzn.to/2NZWPKH
9H Ceramic: amzn.to/2Ql5qEn
Rain X Additive: amzn.to/2xvgfg4
30'' Light Bar: amzn.to/2xnuKCM
20'' Light Bar: amzn.to/2QKvREy
Cube Lights: amzn.to/2NmIRlL
Tailgate Assist: amzn.to/2G4o8yz
Diesel Cap : amzn.to/2NALPyE
Tunes: www.alligatorperformance.com/
30 Days of FREE Amazon PRIME!! : goo.gl/EzssTg
FOAM CANNON: amzn.to/2u89qRN
GEAR WRENCHES: amzn.to/2t6FzbK
24 Pack Black Ice : amzn.to/2npbPky
___
Music: 🎶
/ capiteeon
theartistunion.com/dyallas
/ lakeyinspired
/ joakimkarud
__
Social Media: 📺
Instagram: Ryan2546
Snapchat: Ryan2546
Twitter: Ryan2546
___
The Crew:
Mike: / dobronos
Ben: goo.gl/cx8uq9
I am participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites. Products in the provided links are my recommendations based on honest use and experience with them. - Авто та транспорт
I've never seen how powder coating was done. I never expected powder to turn into that beautiful color and shine. Pretty badass.
That first cup turned out so good. Loving that purple. Totally makes me want to powder coat my stuff. It blew my mind when I saw how good it turned out.
Not going to lie, didn’t think they would turnout that well! They look awesome!! Great job! Thank you for sharing this video, be safe! Wow, they turned out good!
Been using Eastwood’s powered coating stuff for 10 years now. Love it! Have done many things with it! Your first time went great! Took me a few times to get stuff right. My set up is in my garage, works way better then inside the house.
WOW good to have access to the oven you do not use for cooking! Great result! I am happy with that!
Was considering getting my winter rims stripped and powder coated for a while now cause they look horrible right now. After watching you powder coat at home I’m definitely going to take a shot at it. Thanks man!
That looks AWESOME....keep up the good work. I have learned a lot from you watching these videos!
So powder coating was out of my budget for my build but thanks to your video I totally believe i could do this myself. Keep up your videos man, this is amazing
Turned out awesome, can’t wait to see the rest of the parts complete!
Aluminum foil to cover threads. The reason you pre bake , after washing or clean is to get rid of moister and oils
I love that you're doing this yourself. Looking incredible.
I have learned that hot coating can help alot on small systems...thanks for the info!!!👍👍
Oh snap !
I'm buying an oven this weekend !
Thanks for another money saving DIY video !
Wow they came out great nice job!! can't wait to see the diff covers
Fukkin sick bro!!! Do you know how many doors you've just opened having this setup??! Customization unlimited!!!!
This is awesome! Same color I have on my truck, I'm going to have to invest in getting this system.
Very impressed. Great work man you do amazing work for majority diy, the truck is hands down breathtaking. 💪🏼🔥
Dammmmm!! Dude that looks sick !! Congrats bro I like these kind of videos you make bro, helps us/motivation to save money and do it your self !🔥🔥🔥👍🏼😎
Need to get some silver powder to get more accents to match the coils on the truck. Love the powder videos! Catlnt wait to see what else you do with this powder setup!
Awesome job! The other reason you prebake before powder coating is to remove moisture from the metal. Otherwise if the moisture comes out after coating the powder pops and you get little bubbles/voids where moisture escaped. Great results though!
Man seeing you do that and dont look too hard makes me want to go out and get one and do stuff like that cause if you can do it at home you save money
Love watching your channel truly turn own wrenches. Super slick
Because of the way electrostatic charges work, you're going to have the least coverage on "internal corners". What this means functionally for YOU, is that the lip of your tumbler is gonna be hard to get to when the whole thing is sat flat on a pan like that.
I'd recommend you fabricobble a conductive stand that supports the tumbler from the inside, so that the lip isn't touching anything and is far from the conductive base plate. A stand shaped like an upside-down T if that makes sense, where the tumbler sits upside down on the vertical part. That should remove the difficulty you were having.
To help with your edges around the lip or other tight spaces, that's when you are best to drop your kV setting (I think from memory the Eastwood setup is explained 'backwards') and use your diverter tip. Looks good though!
Looks good... I am wanting to start doing some powder coating on some under hood stuff
WOW that was awesome !!!! You should start a Merch line with illusion purple and lime green tumblers. You did a fantastic job and it's amazing how professional quality powder coating came from a basement apartment with DIY equipment.
Being a professional powder coater, I promise you it's not that easy to create a professional quality job. Nothing against this guy, but unless you miss a huge area, even the shittiest jobs look good on film.
You have inspired me to do this myself. Great job!
Thanks for explaining the process 😊 really koo keep up the good work 🤙🤙
Good job man, looks great! Keep doing what your doing!
Damn that looks so good. One thing you could try as well is a ground strap right to the object your powder coating might help the current flow through it.
Chris.
Bro I been watching these videos on power coating thinks to yours it was simple easy and awesome! Thinks brother
Also you want to try and hang stuff when shooting and baking, having it sitting on a tray you'll get a build up of powder on the bottom edge and thick spots that can chip off. Powder coating is the easiest paint process to get good results when learning fresh.
That turned out awesome. Want to do my coils an radius arms an more lol. You could start up side jobs powder coating. Love the channel love the truck an car keep up the amazing content.
That's wicked bro. Awesome colour. Nice work man.
Damn man they look great im into mustangs heavy and I use to do hydrodipping I think ill get me a powder coating gun now lol
No weatherman
You mean electrician lmao
I do the everything myself to my truck as well it’s the only way you learn
Love it !!!!
Ya on those guns I pull off the blue plastic part on the end of the rod coming out the gun. I like that better.
If you keep doing tumblers get a silicone plug to go in the bottom helps keep a clean looking lip. You can get a rod and put it thru it and set the cup on it.
Stuff the cup with aluminum foil also to make great contact.
Illusion purple from powder by the pound?
Ya now you need to start cutting decals to use as stencils to make logos and designs.
It’s a pretty fun hobby to mess around with for sure. Also can turn it into some side income.
Great suggestions man. Most people just leave their stupid opinion of what somebody did wrong. These are actually great ideas and helpful. Kudos.
IMPRESSIVE!! Congrats Ryan I believe you have it down now
Wow... floored. Nice work Ryan!
Dude that turned out sick I wish I lived closer id have u do some stuff for me. Love the truck bro u inspired me to build mine but I won't make it this year. Will definitely be looking for u next year. Keep up the content man love it
Its not hard at all, the supplies is cheap, make sure you get high quality powder which is also really affordable. Then a cheap used oven. Can even use a small toaster oven if its just small stuff you want to experiment with. Watch Cameron Niemelas channel on his dirtbike builds be does tons of powder coat and Cerakote videos super informative.
I love how everything he does is on his own and on a budget
Hey Ryan I was thinking about the emission b.s. and when you have to put your exhaust back on you should leave the engine deleted
Ok I subscribed. That was awesome! Good job buddy 👍🏽🎯
This motivated me to setup my own “studio” for my calipers. Awesome video, also not often I see someone else from Ohio!
Incredible! Outstanding job!
Sweet color great job on the first try
Now that's dedication to the craft when you have what looks to be a fairly new build house, and you not only run a compressor line in to spray powder coat but move the existing oven and bring in another oven to cook it in, powder coating from start to finish in your kitchen. lol...
It looks amazing and that is definitely a color that Pops. Little advice put on a respirator so you dont inhale the fumes and dust in the air.
Great video, does it smell when it's baking? And where does a person buy a large bag of powder coating from?
That is badass!! Makes me want to donut myself now
Amazing work looks so good
i didn't know a home kit even existed. ideas are flowing now. Unlimited powder coating with the only restriction being the size of the oven!
You should get a box fan, seal it to the cardboard box with the fan pulling out, with a home A/C filter between the box and the fan. This'll pull the excess powder through and contain it in the filter. You'll probably want to space the fan away from the filter about an inch or two, but sealed all the way around to the box.
Love the montage of the cup 🤣🤣
Dang Ryan those turned out amazing👌👌👌🤤🤤🤤
Looks awesome!! Good video
Turned out amazing. Sky’s the limit!
Where or how did you get a purple seatbelt, that's cool.
Gawdd dogggg!! Amazing! I wonder if this will work on my rims!
Hell ya dude looks really good. Doing it your DIRTY WAY
i know at Lowe`s where you find drawer slides an handles at the bottom shelf they have galvanized steel Swivel plate as we no it as a Lazy susan you can put what ever you want for the top and the bottom of it then you will be able to turn the parts to powder coat and you can run a short wire off it then you can clamp your ground to that .
Thats crazy how that works. Man I love that
Awesome video it's crazy I'm trying to fix up a 96 Silverado your videos are helpful I'm from Columbus too big shout out to Ohio have you thought about having your own garage?
Damn that badass brother makes me wanna do some powder coating
Hell ya glad you did this ima have to invest in one myself
Looks awesome. Now i need to paint my wheels the same color. Link to the kit please
You open boxes with such precision lol :)
The spray cans of aircraft paint stripper works incredibly. Have used it many many times.
So do all colors come out looking anodized? Im def looking into doing this
I was like man ive seen that truck around here before, then I saw the plate! local man. and the powder turned out good for a first try man
Another Great Video - you can get/amazon a plastic rotating cake-decorating platform for under $10 and it’ll support a lot of weight, while spinning freely, use a fitted foil tin tray on the platform for your grounding. (They sell it as a package).
Looking forward to the next video!
Need some power to the garage to run that oven. Then you can charge your friends. Nice work!!
Maybe put the cups on a metal center stand inside the cup versus the pie tin. That way you can turn the center stand and you can get more full coverage on the bottom of the cup if it's raised above the surface. By the way, you now have me thinking about how I could use this on certain car parts on my 370Z...Darn it!!
Freaking awesome how you can do all of these things at home. You really inspire me to try things with my truck! Please keep the videos rolling!
Is it safe to use in a home oven for cooking?
How is the surface that is contacting the pan? Is that contact surface not coated? Coated? Leave a mark ?
practice makes perfect just keep trying and if you can put some thing in the cup to hold it up off the pan you could get the top better
came for the powedercoat, stayed for the classic Jimmy O style "WHATSUPGUYS"
Bad ass color! What powder coating system are you using?
Sick asf man definitely inspiring
Use a wire to hang the peice being powdered too. Then just unhook it and transfer to oven.
The result looks good, and at least you used a seperate oven, but in the kitchen?!!!! There will be powder coat everywhere, forever lol. run an outlet into the garage my guy. Be safe
That came out sick!!!!
Should have used spray stripper in the can buddy! Works everytime!!!!! Can strip a whole bike frame in 30 minutes.
Dang this really your first time powder coating? Lol. nice job it came out awesome! The only thing I’d suggest to try differently is hang the parts like you mentioned off some wire, it just usually makes it a little easier to get full coverage. Other then that awesome, awesome job man I can’t wait to see the truck parts now there gonna look dope!👍🏼
badass job congrats
man you killed it they look bad ass
Great job looking good
How many pounds of powder did you buy ? Wanting to do some coil springs not sure how much I’d actually need. It’s cool watching you do this. Just the fact that you do all this yourself.
What's the name of the green/yellow paint on your truck? It's great!
Get a sand blaster enclosed case that has a front window and gloves that are sealed and yeah a respirator is a must!
So coat the color on cook it, then coat it with top coat and cook it again and it should be the color ?
Looks wicked, nice job! How are the fumes from the baking if any, in the house?
You can smell it wouldn’t recommend staying in the room the whole time
Yup... I'm buying myself a little powder coating kit now. Thanks Ryan 😂
ITS SO FUN HAHA
Do you have a link to the kit you used
Looks amazing! Are you taking orders?
You should really shine up the exhaust to kind of match the coils and powder the exhaust tip purple. I think that would look sick. Thoughts everyone?
Great job ryan love the vids
where did you get that powder from and what colors is base and top coat
Where did you get the kit? That looks cool
😳😳😲😲 my face when it came out of the oven lol😅
MINE TOO!