Hey Gerardo, I just wanna say thanks a lot for these videos. They’ve motivated and encouraged me to get my CDL. I’m up in Illinois hauling hot asphalt and all types of material on a dump truck. I recently lost my dad also which has made me grind even harder. Saludos hermano! Keep on truckin’!
in my opinion your the best truck driver on youtube, you drive exactly how I would drive if I had my cdl, loud but smooth I literally watch every video you post😂
Your videos have been some of the ones I've been binging while on a work layoff. Green lit to get back behind the wheel and start hauling equipment again Monday! it's money making time!
Great episode, as always 👍🏻 What I really really like and appreciate is the constant change of perspectives, these changes make the difference to many other "Trucking YT-channels" 👏 Keep up the good work, I really appreciate it. Thanks and kind regards from Germany 🇩🇪, Philipp 👋🏻
Yeah I hated it when I would show up to pick up a piece of equipment and it was dirty, so I would send a picture to dispatch and she would charge extra for the cleaning fee. Plus it would take time from your job cause you had anywhere from a 30 minute to almost an hour delay cause you're cleaning it. So I feel where you're coming from brotha and I finally got my Texas Truck flag stickers 😎🔥🔥🤘🏼
up here in Washington we charge an extra $50 if the tracks arent clean on excavators or Cats, it just common curtsey, time is money. keep er rollin, setup is looking clean man
Love your videos brother! Been following you for a couple of years now and I love the new content. Got my cdl 2 years ago and been pulling a low boy for a while now. You inspired me to get into it. Much love from Central Arkansas!
Buenas Gerardo como andamos saludos acá de Austin tx Freddy delgado ánimo están bonitos tus videos aprendiendo cosas nuevas con tus videos fierro 🤠 listo para el siguiente video fierro
With a 3 axle lowboy you can pretty much pull with many truck combinations. Once you get into real heavy haul with 4 axles and pusher axles on the truck is when gearing transmission, HP torque mater the most.
Question; when hauling oversize loads, where they are outside the width of your trailer, do you need a permit for that load or do you carry a permit for any of those loads (since they are within Texas)? Thanks. Hello from Houston Texas.
Yes, permit needed in Texas over 8’6” wide over 80,000lbs, over 14’ in height, 59’ long. If you run Texas you can apply for a annual (good for 1yr) oversized permit. Which you get 12’ wide 14’tall 120,000lbs, 110’ long maxed out before you apply for a bigger permit. Hope this helps. -SHOWTIME
Thoroughly enjoyed this video, however i’ve a question i’m hoping you can help me out on… In the Uk, on all of our drop out neck lowbeds in the UK and Europe, we have rear steering axles on the trailer. How come you never see them across in the states, do you lot never need them with the size of the roads?
Hey Gerardo, I just wanna say thanks a lot for these videos. They’ve motivated and encouraged me to get my CDL. I’m up in Illinois hauling hot asphalt and all types of material on a dump truck. I recently lost my dad also which has made me grind even harder. Saludos hermano! Keep on truckin’!
Saludos carnal, ánimo y bendiciones
@@Grtruckingdemolitionllc anxiously waiting for my order I placed earlier this week brother! 🔥
Congrats on getting your CDL!
The running lights look awesome
in my opinion your the best truck driver on youtube, you drive exactly how I would drive if I had my cdl, loud but smooth I literally watch every video you post😂
The lowboy with the polished aluminum wheels lookin' good with the polished aluminum wheels on the T800. Good video.
Damn the J brake is so satisfying 👏🏼😩
Bought my merch today, looking forward to getting them
Awesome man, thanks for the support.
Your videos have been some of the ones I've been binging while on a work layoff. Green lit to get back behind the wheel and start hauling equipment again Monday! it's money making time!
Great episode, as always 👍🏻 What I really really like and appreciate is the constant change of perspectives, these changes make the difference to many other "Trucking YT-channels" 👏
Keep up the good work, I really appreciate it.
Thanks and kind regards from Germany 🇩🇪, Philipp 👋🏻
Those 8" straight pipes sounds awesome
it's crazy how even cleaning the mud is satisfying to watch. lol I must be weird.
Looking Good as always…..😎👀👀
I love that lowboy trailer big up from jamaica 🔥
Yeah I hated it when I would show up to pick up a piece of equipment and it was dirty, so I would send a picture to dispatch and she would charge extra for the cleaning fee. Plus it would take time from your job cause you had anywhere from a 30 minute to almost an hour delay cause you're cleaning it. So I feel where you're coming from brotha and I finally got my Texas Truck flag stickers 😎🔥🔥🤘🏼
I'd rather be pulling and RGN than the reefers I am currently. One these days. Keep it up man.
Intro is 🔥🔥 gotta love them turbos spooling. The Lowboy looking fresh as well!
Wonderful content and very boring wonderful Well done brother
Another great video! Those polished wheels on the trailer look killer brother!
Loves ur videos bro please don’t bandwagon and sell ur Kw for a Peterbilt love watching you bec ur different than every one 🙏
up here in Washington we charge an extra $50 if the tracks arent clean on excavators or Cats, it just common curtsey, time is money. keep er rollin, setup is looking clean man
The chrome rims suit it so much
Aqui esperando el video donde nos muestres como se be el hermoso camion de tu papa en la carretera
Love your videos brother! Been following you for a couple of years now and I love the new content. Got my cdl 2 years ago and been pulling a low boy for a while now. You inspired me to get into it. Much love from Central Arkansas!
Great to hear that man.
With that 3 axle set up you got on your truck what’s the maximum equipment weight you carry ?
One dam thing about those komatsu's is the dam alarm never turn off
Can’t wait to catch you strolling around in Houston bro I always have my eye out looking for you. I love the videos hermano! Keep on keeping on!🚂🚂
Saludos hermano que bien se ve la traila con los aros de aluminio
SHOWTIME BABY!!!!!
BILLYGOAT 🤘🏽👋🏽😎 -SHOWTIME
Buenas Gerardo como andamos saludos acá de Austin tx Freddy delgado ánimo están bonitos tus videos aprendiendo cosas nuevas con tus videos fierro 🤠 listo para el siguiente video fierro
Need axlecovers and cylinder screwon lug nut covers on trailer. Beautiful truck though. Totally jealous driver
💨💨🩶🩶🖤🔥🖤🩶🩶💨💨 rollin badass coal
💨🩶🖤❤️🔥13:05🔥❤️🖤🩶💨
🩶🩶🖤🖤🔥16:43🔥🖤🖤🩶🩶
How do you set up your truck for heavy hauling is it a certain motor or what is it ?
It’s the specs. Most trucks can be set up for heavy haul. His t800 is meant for vocational use so it’s already spec’s out for it
With a 3 axle lowboy you can pretty much pull with many truck combinations. Once you get into real heavy haul with 4 axles and pusher axles on the truck is when gearing transmission, HP torque mater the most.
Geras, no hay camisa roja en el store, what’s happening?
saludos Y EXITOS!!!!
cuando vas hacer un video en español !!!!! saludos desde VENEZUELA!!!!!!!
I could spend great twenty minutes during dinner :)
Question; when hauling oversize loads, where they are outside the width of your trailer, do you need a permit for that load or do you carry a permit for any of those loads (since they are within Texas)? Thanks.
Hello from Houston Texas.
Yes, permit needed in Texas over 8’6” wide over 80,000lbs, over 14’ in height, 59’ long. If you run Texas you can apply for a annual (good for 1yr) oversized permit. Which you get 12’ wide 14’tall 120,000lbs, 110’ long maxed out before you apply for a bigger permit. Hope this helps. -SHOWTIME
@@JEEPBEAST07 thanks for the info.
Been watching you since day 1 , keep up the work 💯, you need to open up a cdl school jaja
Right i should
Thoroughly enjoyed this video, however i’ve a question i’m hoping you can help me out on… In the Uk, on all of our drop out neck lowbeds in the UK and Europe, we have rear steering axles on the trailer. How come you never see them across in the states, do you lot never need them with the size of the roads?
We do have some but only for very long loads. Like you said we do have very wide highways and not to narrow roads so we get around just fine
@@Grtruckingdemolitionllc Appreciate the reply fella, nice one, thank you 👍🏻
My city 🤟🏽🤟🏽
You ever going to make a Texas Flag Trucker cap, if you get it made I'll definitely buy it from you...
That’s a great idea
@@Grtruckingdemolitionllc gotta rep Texas bro all the time 😎🔥🔥🔥🔥
Klk hermano bendiciones
Saludos desde Austin Tx
Have to get as much speed as possible so you can Jake around the curves.
With the amount of dirt u cleaned off the tracks
U can easy buried a dead rooster with it
Like those w900 k woopers at the start
I hate to ask bro. But what kind of go pro you use for your dumpster vids
Go pro hero 7
😎👍
Manín con dios por delante dios levas ayudar acunpli sus sueño de tener un camión deso
💯💯💯👍🏼👍🏼‼️‼️‼️
🔥
Hermoso
Your all by yourself with nobody around. You don’t really need to run your 4 way flashers when unloading.
man the guys you haul equipment for have ZERO pride in any of their equipment
Most of them do, they are mainly demolition company’s that’s why they are so beat up
Using your Jake’s in town isn’t that cool anymore.