Thank you so much. I was having an issue with hearing myself through my rodecaster while hearing my self again through USB 2, and this fixed my issue. Also fixed my feedback issue, which was solved by the mix minus setting. All were issues with routing settings.
Thank God I saw this before dropping $700 for the Rodecaster Pro to use for my remote interviews!!! I was ready to shoot myself after trying to follow this Trapeze act just to do this with that thing. No way!!!! I will just stick to my regular audio interface and going through Cleanfeed. I was hoping it wouldnt be that complicated with the Rodecaster....boy was I wrong!!!!
@@Riversidefm Awesome thanks, the XLR looks different. This is a Dual version. Just wanted to make sure it was for the 3 pin XLR. I'll be sure to buy the RodeCaster in the near future.
@@Riversidefm I am using it with the Rode videomic go 2. It’s a catastrophe. Firstly, to set up with the MacBook Air. Secondly, there’s massive interference in the signal, so that the sound quality is worse than if one selected just the microphone itself, as a source. For my purposes, it means choosing between a better sound quality, just selecting the microphone, but then losing the ability to make use of the software. Or, using the software, but then suffering from poor sound quality from the microphone.
@@HolisticHealthEducation Are you connecting the mic to your MacBook Air via USB? And what in the software is helping to improve the mic sound? Is it an audio preset? You may be able to apply some EQ, compression, and other effects in post-production to still get the sound you're looking for.
@@Riversidefm Yups, connecting using the Rode usb cable, which is apparently a prerequisite for it to work. The software destroys the sound quality, not help it. If I want good sound, I can’t use the software and have to select the microphone, instead of the software, as source. I specifically bought that microphone because it’s compatible with the software. For the reason that I don’t want to have to edit the sound post-production. I am new to this and have to fight a very steep learning curve. Hence my idea was to get good quality sound in pre-production, using the software, so that I can just edit everything on Riverside and then post. Clearly, that’s not going to work with this software, unless there is something one can do to make the software work correctly.
How do I take the live audio feed from the remote guest into the Rodecaster for mixing and monitoring and then output it back to a unique audio track in Riverside?
You would need to turn up both your mic channel and the USB audio from your computer in the routing in the RODE connect software. But your remote guest will hear themselves twice over. What platforms are you trying to live stream to with this setup?
@@Riversidefm it's not really a livestream, but I'll use Riverside to record the video for sure. The biggest challenge I have is getting my guests to upgrade microphones etc. so I was hoping to get their feed into the ROdecaster so I can enhance it
Question: We often have two local hosts and a remote guest. I like to not wear headphones on the video shoot - can we set our monitors low in volume, and set a noise gate on our local mics. That way the remote guest is loud enough to hear, but quiet enough to stay under the noise gate? If so, I assume I can then select 'I am wearing headphones' on Riverside so it does not add echo cancellation?
I just started using riverside and am trying to figure this all out. This video helped tremendously, however I do have a question, is there way to get the audio out from riverside to record to a daw in real time?
You can! How I set it up in this video, you can record the USB channel locally to an SD card in the Rodecaster and that will recording your remote guest in a separate track. Or you can use Logic, GarageBand, Audacity or similar to record that input number from the Rodecaster as well.
Using my SMART pads from my Rode ProCaster II is not recoding in Riverside. The audio is recording great but not the SmartPad. Is there a setting I need to adjust?
Hey Justin! In the Rode Connect application, check the routing settings. For the USB output routings settings, make sure the sound board slider is raised to be included in your Riverside routing. Would recommend doing a test recording in case it's too loud / soft.
There are multiple methods to achieve proper recording with Riverside. We would suggest choosing the steps in our article or in the video, and let us know if you run into any issues.
You cant just use it as a normal Audio interface? I just want to record with one mic on riverside but It still doesn't work. I have Rodecaster selected but it doesn't pick up
Yeah....I almost fell for the hype of the Rodecaster. I would have been furious to learn that just to use it for a remote interview I would have to go through that insane process!!! No way!!! I will stick to my little audio interface and Cleanfeed. I was hoping that the Rodecaster would just be found as an audio interface input device like most others out there.....but wow was I wrong.
It's a little more complicated than just "plug and play", but if you follow the steps in this video it will work with Riverside! Remember to select the Multi device and not "chat" in Riverside.
Thank you, I have changed all my seetings to mtach your video. I am still getting audio sync issues. I am using an elgato camlink4k to a sony zv1 and then a rodecaster pro II for my audio. I am still on free version, but wanted to try this out before I start paying and runnning into issues. Any help would be appreciated.
Are you choosing the Rodecaster as your audio input and speaker output in Riverside, and then the CamLink 4K for video? I know the CamLink 4K has given us issues in the past. You may consider connecting the Sony ZV1 directly to your computer in webcam mode to see if you still experience the same issue.
Do you have suggestion for adding video as well. What if I have 4 people in person who are all running audio through the rodecaster and two people remote? Let's say all 6 guests want to be able to see each other. Last time I did this setup, I had 4 webcams setup each going through the 4 guests individual laptops but muted sound (no mic or sound coming in/out, since we were using rodecaster) So it recorded to riverside with no audio on the tracks but we got video. Audio was recorded to riverside using the single audio track from the rodecaster which was the sum of all four of the mics from the inperson guest/host. Do you have any better solutions for this kind of setup? We often will do podcasts where some people are in person and 1-2 people are remote. I'm having trouble figuring out what the best methods are to do video and audio and record separately and make using the Riverside app for editing with magic clips as easy as possible. Big fan of Riverside hopefully you guys have some suggestions!
Great question! For the audio, you could record the individual tracks directly on the Rodecaster, or use software like Audio Hijack to record those separate files for in-person video. I explain here: ua-cam.com/video/FdkcLfm14O4/v-deo.htmlsi=G4_ds6ZJg7fHl-8t Then for video, I would recommend using mobile devices for the in-person guest video running the Riverside app. We have a feature that allows you to mute the device audio, but it will still record audio making the multi-track creation easier in post! I show that feature here: ua-cam.com/video/Gb9aXv1mPTs/v-deo.htmlsi=GEww6nR8rWLIQF4c
Your video helped a lot. I hear static from my guest. I contact support and they cannot hear it when I send it to them. Any suggestions? Thanks in advance.
I just purchased this one yesterday. I downloaded the software for my laptop, however when I open it it say to connect it to the Rodecaster and it was connected, but is still not working. Restarted the computer, unstilled the software and installed again but is still not working. Anyone has any idea what it could be?
Dear sir, Thank you so much. But I have a query.By using either TRS cable or with Rode Microphones VXLR Pro ,will I be able to connect Rode wireless pro mic with any audio mixers ?
Thank you, this video is fantastic! I do a local backup recording on Garage Band. Question: Can I create a track on GarageBand that only captures USB input from guest? I assume so?
Fort he life of me I cannot hear my remote guest through my headphones in Riversidefm. I can hear my own voice in the headphones and I can see my guest bar moving when they talk, just no guest sound through my headphones,. Riverside support was zero help. Her mic is working because we tested on another app. Anyone have an suggestions? I
When entering the Riverside studio, are you choosing the Rodecaster Pro II as both the mic input and speaker output? If so, are your headphones plugged into the Rodecaster Pro II directly? Finally, if the answer to those are yes, open the Rode Central software, go to Routing, choose headphone 1 (assuming that port you have your headphones plugged in), and make sure the USB 1 fader is up.
I have this same problem and have been using a separate AirPod connected to my Mac under my headphone just to hear my guests. It’s extremely frustrating.
thank you because I'm mainly going to be solo with guest via web using Riverside for podcast . I just don't like the shureplus motiv app for my Shure MV7 @@Riversidefm
Sorry, I left this comment/question under another video but asking it hear is more appropriate. If I'm running a Zoom P4, can I use Audio Hijack to make a redundant recording (in addition to the SD card recording), like you're doing here? If yes, will I also be able to use that same computer to record a remote guest via Riverside, etc? Thanks for your help Riversidefm Team.
Second to none on your thoroughness. Nobody has been able to explain this subject well. I have been tasked with setting up a local podcast and it was decided that they wanted remote guest ability as well. This complicated things so this was extremely helpful. I do have a question. I most likely will have just one camera (FX30) to start pointed at two local hosts along with a remote guest. The two hosts will have two XLR mics tied into the Rodecaster pro II and the FX30 tied into the host computer for Video. Riverside video auto-switching should work fine between hosts and remote guests in this scenario I am assuming. So when either host speaks into their XLR mic it will go to the fx30. However, what if I want to add another camera to separate my two hosts? My two mics will be tied to the Rodecaster Pro that is attached to the single host machine with the FX30 camera. Trying to figure out how to retain auto-switching with multiple local cameras for my (local) hosts.
Appreciate you saying that, and I have a video on exactly that kind of multicam setup! Explained here: ua-cam.com/video/8_eMylXlNxQ/v-deo.htmlsi=1PTNE3Mq0PVYx8c0
We would recommend uploading those music clips to the Riverside media board in studio and you can play from there! This way they won’t be included in a mic input and you can download a synced track with the music from riverside after the recording.
@@Riversidefm Thanks for the reply! that sounds like it would work. unfortunately it is not a solution for spontaneous situations. does it make sense to have your "multitrack" recording in garageband and connect it to "chat" in riverside?
It's a solid interface for sure! There is also a smaller version if you don't need 4 inputs: www.bhphotovideo.com/c/product/1762232-REG/rode_rodecaster_duo.html
Thank you so much. I was having an issue with hearing myself through my rodecaster while hearing my self again through USB 2, and this fixed my issue. Also fixed my feedback issue, which was solved by the mix minus setting. All were issues with routing settings.
Glad this was helpful!
The audio Routing section is what I been looking for for A WHILE now! Thank you so much for this vital info 👏🏽👏🏽💪🏽
Glad we could help!
He explains a lot better than the guys at rode compay themselves
Appreciate that 🙏🏻
LOL
Thank God I saw this before dropping $700 for the Rodecaster Pro to use for my remote interviews!!! I was ready to shoot myself after trying to follow this Trapeze act just to do this with that thing. No way!!!! I will just stick to my regular audio interface and going through Cleanfeed. I was hoping it wouldnt be that complicated with the Rodecaster....boy was I wrong!!!!
Glad we could offer some insight!
I sold some gear to buy the Rodecaster Pro 2. It is well worth the initial setup, it is an amazing device.
FINALLY!! I've been looking for this solution. thank you so much!
You’re welcome! Glad it helped
I’m a Riverside member This is great to know.
Glad it's helpful!
This video answered sooooo many questions I had. Thank you so much for this video!!
Glad it helped! Thanks for watching 🙏🏻
What type of XLR input is on the back?? It looks different from the XLR input on my M-Audio 🤔💭
Your M-Audio may have the combo XLR + 1/4" line-in ports. The Rodecaster is XLR only
@@Riversidefm Awesome thanks, the XLR looks different. This is a Dual version. Just wanted to make sure it was for the 3 pin XLR. I'll be sure to buy the RodeCaster in the near future.
You should also do a video for using the Rodecaster Connect software version.
Good idea! Are you using that with a Rode Mic?
@@Riversidefm I am using it with the Rode videomic go 2. It’s a catastrophe. Firstly, to set up with the MacBook Air. Secondly, there’s massive interference in the signal, so that the sound quality is worse than if one selected just the microphone itself, as a source. For my purposes, it means choosing between a better sound quality, just selecting the microphone, but then losing the ability to make use of the software. Or, using the software, but then suffering from poor sound quality from the microphone.
@@HolisticHealthEducation Are you connecting the mic to your MacBook Air via USB? And what in the software is helping to improve the mic sound? Is it an audio preset? You may be able to apply some EQ, compression, and other effects in post-production to still get the sound you're looking for.
@@Riversidefm Yups, connecting using the Rode usb cable, which is apparently a prerequisite for it to work. The software destroys the sound quality, not help it. If I want good sound, I can’t use the software and have to select the microphone, instead of the software, as source. I specifically bought that microphone because it’s compatible with the software. For the reason that I don’t want to have to edit the sound post-production. I am new to this and have to fight a very steep learning curve. Hence my idea was to get good quality sound in pre-production, using the software, so that I can just edit everything on Riverside and then post. Clearly, that’s not going to work with this software, unless there is something one can do to make the software work correctly.
@@HolisticHealthEducation Can you share what presets and settings you have adjusted in the Rode software?
Thanks for info! Pastor Robles!!
Glad I could help!
Is there a way to turn on the Rodecaster Pro 2 via a remote power button? I'd be nice to have so I don't have to stand up and reach behind the board.
There's not a remote power button, but I actually leave mine on 24/7 and haven't had any issues!
How do I take the live audio feed from the remote guest into the Rodecaster for mixing and monitoring and then output it back to a unique audio track in Riverside?
You would need to turn up both your mic channel and the USB audio from your computer in the routing in the RODE connect software. But your remote guest will hear themselves twice over. What platforms are you trying to live stream to with this setup?
@@Riversidefm it's not really a livestream, but I'll use Riverside to record the video for sure. The biggest challenge I have is getting my guests to upgrade microphones etc. so I was hoping to get their feed into the ROdecaster so I can enhance it
ok great information however, what would we do if we want to allow the in person crowd to be able to listen over speakers as well?
You can connect speakers to the audio outputs on the back of the Rodecaster Pro!
Can you still have separate channels with volume control on each and delete bad tracks
You can record to a local SSD connected to the Rodecaster without a computer! But you can't really edit them all on the Rodecaster itself
Question: We often have two local hosts and a remote guest. I like to not wear headphones on the video shoot - can we set our monitors low in volume, and set a noise gate on our local mics. That way the remote guest is loud enough to hear, but quiet enough to stay under the noise gate? If so, I assume I can then select 'I am wearing headphones' on Riverside so it does not add echo cancellation?
Yes you can turn off echo cancellation and the noise got option should help! I would run a test just to be sure there are no other issues though.
I just started using riverside and am trying to figure this all out. This video helped tremendously, however I do have a question, is there way to get the audio out from riverside to record to a daw in real time?
You can! How I set it up in this video, you can record the USB channel locally to an SD card in the Rodecaster and that will recording your remote guest in a separate track. Or you can use Logic, GarageBand, Audacity or similar to record that input number from the Rodecaster as well.
Any possibility of doing a video for the RodeCaster Duo? Those menus are a little different.
Will try to get one soon!
@@RiversidefmThank you!
Using my SMART pads from my Rode ProCaster II is not recoding in Riverside. The audio is recording great but not the SmartPad. Is there a setting I need to adjust?
Hey Justin! In the Rode Connect application, check the routing settings. For the USB output routings settings, make sure the sound board slider is raised to be included in your Riverside routing. Would recommend doing a test recording in case it's too loud / soft.
Are we cable to record to the SD card and into Riverside on the older Rodecaster Pro?
Yes, recording to SD card and USB interface should work simultaneously.
Now you mention choosing rodcaster pro 11 main but on your site it says to choose chat when recording an Interview, so i am confused.
There are multiple methods to achieve proper recording with Riverside. We would suggest choosing the steps in our article or in the video, and let us know if you run into any issues.
what computer are you using? mac or built tower?
Mac Studio!
You cant just use it as a normal Audio interface? I just want to record with one mic on riverside but It still doesn't work. I have Rodecaster selected but it doesn't pick up
Yeah....I almost fell for the hype of the Rodecaster. I would have been furious to learn that just to use it for a remote interview I would have to go through that insane process!!! No way!!! I will stick to my little audio interface and Cleanfeed. I was hoping that the Rodecaster would just be found as an audio interface input device like most others out there.....but wow was I wrong.
It's a little more complicated than just "plug and play", but if you follow the steps in this video it will work with Riverside! Remember to select the Multi device and not "chat" in Riverside.
Thank you. Does it work for any USBC cord or specifically the one from Rode?
You can use *most* USB-C cables, but they do need to support the proper data transfer speeds. We would recommend using the cable that comes with it.
Thank you, I have changed all my seetings to mtach your video. I am still getting audio sync issues. I am using an elgato camlink4k to a sony zv1 and then a rodecaster pro II for my audio. I am still on free version, but wanted to try this out before I start paying and runnning into issues. Any help would be appreciated.
Are you choosing the Rodecaster as your audio input and speaker output in Riverside, and then the CamLink 4K for video? I know the CamLink 4K has given us issues in the past. You may consider connecting the Sony ZV1 directly to your computer in webcam mode to see if you still experience the same issue.
Do you have suggestion for adding video as well. What if I have 4 people in person who are all running audio through the rodecaster and two people remote? Let's say all 6 guests want to be able to see each other. Last time I did this setup, I had 4 webcams setup each going through the 4 guests individual laptops but muted sound (no mic or sound coming in/out, since we were using rodecaster) So it recorded to riverside with no audio on the tracks but we got video. Audio was recorded to riverside using the single audio track from the rodecaster which was the sum of all four of the mics from the inperson guest/host.
Do you have any better solutions for this kind of setup? We often will do podcasts where some people are in person and 1-2 people are remote. I'm having trouble figuring out what the best methods are to do video and audio and record separately and make using the Riverside app for editing with magic clips as easy as possible.
Big fan of Riverside hopefully you guys have some suggestions!
Great question! For the audio, you could record the individual tracks directly on the Rodecaster, or use software like Audio Hijack to record those separate files for in-person video. I explain here: ua-cam.com/video/FdkcLfm14O4/v-deo.htmlsi=G4_ds6ZJg7fHl-8t
Then for video, I would recommend using mobile devices for the in-person guest video running the Riverside app. We have a feature that allows you to mute the device audio, but it will still record audio making the multi-track creation easier in post! I show that feature here: ua-cam.com/video/Gb9aXv1mPTs/v-deo.htmlsi=GEww6nR8rWLIQF4c
Your video helped a lot. I hear static from my guest. I contact support and they cannot hear it when I send it to them. Any suggestions? Thanks in advance.
Is it any guest or a specific person? What's their setup? Mic / Audio interface, etc?
@@Riversidefm I only tried one person, he used the older iPhone headset. But it worked just fine on another app. That’s my worry.
I just purchased this one yesterday. I downloaded the software for my laptop, however when I open it it say to connect it to the Rodecaster and it was connected, but is still not working. Restarted the computer, unstilled the software and installed again but is still not working. Anyone has any idea what it could be?
What computer are you using with it? Mac or Windows?
@ I found out it was the usb adapter I was using. I got a new one and got it to work
Dear sir,
Thank you so much.
But I have a query.By using either TRS cable or with Rode Microphones VXLR Pro ,will I be able to connect Rode wireless pro mic with any audio mixers ?
You're welcome! Technically you could connect the Rode Wireless receiver 1/8" jack to a 1/4" jack on an audio interface and use it that way!
Would all of this apply to the first generation rodecaster pro as well?
Yes, the output and routing should be the same!
Thank you, this video is fantastic! I do a local backup recording on Garage Band. Question: Can I create a track on GarageBand that only captures USB input from guest? I assume so?
Yes, you can choose that specific track number from the Rodecaster Pro input!
Fort he life of me I cannot hear my remote guest through my headphones in Riversidefm. I can hear my own voice in the headphones and I can see my guest bar moving when they talk, just no guest sound through my headphones,. Riverside support was zero help. Her mic is working because we tested on another app. Anyone have an suggestions? I
When entering the Riverside studio, are you choosing the Rodecaster Pro II as both the mic input and speaker output? If so, are your headphones plugged into the Rodecaster Pro II directly? Finally, if the answer to those are yes, open the Rode Central software, go to Routing, choose headphone 1 (assuming that port you have your headphones plugged in), and make sure the USB 1 fader is up.
I have this same problem and have been using a separate AirPod connected to my Mac under my headphone just to hear my guests. It’s extremely frustrating.
Riverside Try The Rode Streamer X vs Rodecaster Duo
It's really depending on if you recording with 2+ people in the same room. The Rode Streamer is a great option for solo recording!
thank you because I'm mainly going to be solo with guest via web using Riverside for podcast . I just don't like the shureplus motiv app for my Shure MV7
@@Riversidefm
Nice Job!
Appreciate it!
Sorry, I left this comment/question under another video but asking it hear is more appropriate. If I'm running a Zoom P4, can I use Audio Hijack to make a redundant recording (in addition to the SD card recording), like you're doing here? If yes, will I also be able to use that same computer to record a remote guest via Riverside, etc? Thanks for your help Riversidefm Team.
Yes, you should be able to do all those! I've done that with a MixPre-3, recording in Riverside, SD card in MixPre, and in Audio Hijack
@@Riversidefm You guys rock. Really great resource to us rookies!
Second to none on your thoroughness. Nobody has been able to explain this subject well. I have been tasked with setting up a local podcast and it was decided that they wanted remote guest ability as well. This complicated things so this was extremely helpful. I do have a question. I most likely will have just one camera (FX30) to start pointed at two local hosts along with a remote guest. The two hosts will have two XLR mics tied into the Rodecaster pro II and the FX30 tied into the host computer for Video. Riverside video auto-switching should work fine between hosts and remote guests in this scenario I am assuming. So when either host speaks into their XLR mic it will go to the fx30. However, what if I want to add another camera to separate my two hosts? My two mics will be tied to the Rodecaster Pro that is attached to the single host machine with the FX30 camera. Trying to figure out how to retain auto-switching with multiple local cameras for my (local) hosts.
Appreciate you saying that, and I have a video on exactly that kind of multicam setup! Explained here: ua-cam.com/video/8_eMylXlNxQ/v-deo.htmlsi=1PTNE3Mq0PVYx8c0
Can I record 6 microphones.
The Rodecaster Pro II records a maximum of 4 XLR mics. If you needed to record more, I would suggest the Scarlett 18i20 or larger interfaces.
But what about using it without a PC??
You can record directly to the SD card on the Rodecaster Pro II without a PC! But you won't be able to use Riverside that way.
my SD card stop working how can I get it fix ?
Did you try reformatting the SD card from the touch display on the board? If that doesn't work, you may need to purchase a new micro SD card.
❤ thanks you for replying, I need to get a new SD card, and try again. Thank you again ❤
But how can i play music from my laptop for my guests on Riverside, when mix-minus...??
We would recommend uploading those music clips to the Riverside media board in studio and you can play from there! This way they won’t be included in a mic input and you can download a synced track with the music from riverside after the recording.
@@Riversidefm Thanks for the reply! that sounds like it would work. unfortunately it is not a solution for spontaneous situations. does it make sense to have your "multitrack" recording in garageband and connect it to "chat" in riverside?
I really want this
It's a solid interface for sure! There is also a smaller version if you don't need 4 inputs: www.bhphotovideo.com/c/product/1762232-REG/rode_rodecaster_duo.html
With out a cumputer
An iPad may be your best option for editing then. The Rodecaster Pro doesn't have an on-board editing function.
LOL guets....
Gah! You caught a typo, but thanks for watching til the end 😉
Hello how are you doing, can I contact you?
You can reach out to our support team or leave a comment here and I'll answer!