My best Stinger modification is my new license plate which reads STINGRR. I have the impression that the car is now running even faster since I installed it. It cost me $94 here in CT.
Normally the drl for gt, gt1, gt2 is at the bottom of the lamp. I want a stinger and never was able to find anyone who got the better looking drl on the GT1/GT2. How did you get the gt-line drl? Did you swap the headlamps?
Looks awesome! Thanks For adding the links to the mods I want that tint for the taillights and that spoiler would look nice in gloss black or color Matched.
Dang you’ve been busy, haha! So far I’ve done -BMS air intakes -DC Strut braces -ADD W1 Dual BOVs -Konig Wheels and I have some JA lit air scoops that just arrived, I’ll be doing a video on them soon.
Looks awesome! I got a 21 ceramic silver, and I’m going for a similar look. Where did u get your devils claws, rain guards, and the paddle shift extensions? I just got a set of front devils claws off eBay, but they seem kinda cheap, almost like a wooden texture, hope it works.
I put links in the description for everything if you want to check them out, I actually got my devils claws from KDMWarehouse but I also found the same ones on Amazon. Yeah the texture is a little strange but it seems to hold up well.
www.undergroundgraphics.com/products/kia-stinger-tint-inserts?variant=36822622863517 Make sure you switch the little drop down menu to “rear side reflectors”
Does anyone know where you can get the cover for the air intake behind the front wheels? Been looking everywhere and can't seem to find it =/ Hate that stones get caught in there and it can potentially scratch the side of the car.
I like how many people mod those side markers. The side markers only look good with red Stingers lmao. I'm betting the side markers blacked out would look really great on a black Stinger.
Looks great but just a note, cheap stick on mods don’t hold up too well at over 140 MPH. Don’t know if u intend to drive that fast but I have yet to meet a fellow Stinger owner that doesn’t.
Already driven that fast and everything is still attached. If you know how to treat the surface properly while cleaning you can get good adhesive strips to stick like super glue.
I have been trying to look for tail light tint for the back of my 2022 kia stinger but i can’t find one for the new model of tail light. Do you know someone that sells the pre cut tail light tint?
The body of the 2022 Stinger (except the exhaust tips and tail lights) is the same as the earlier Stingers so all the older stuff fits. Trunk spoilers, window rain guards, front bumper splitter, devils claw canards, a bunch of stuff.
My bad for the delayed reply for some reason I didn’t see the notification for these comments but here is where you can get the vinyl tint for the reflectors - amzn.to/3AIRbks
I had those on my 2019 Kia Optima I took them off cause they covered my Crome trim on the window I went to car I’d and found some that go on the inside oh the windows rather than mess up the Crome strip on my windows
Availability of the car itself and mods. If I traded for the K5 I was going with the GT and I couldn’t find a single one within the state at the time. Also, getting the K5 GT would mean waiting for a lot of mods due to the new 2.5L engine. But this Stinger was fresh off a truck a few miles down the road from me and I learned the engine bay and exterior stayed the same for the most part so all the old mods still work. …and a little bit the speed haha!
Yeah I need to get it tinted all around. I thought the factory tint would be dark enough but this Texas heat really gets in through the windows and makes it hot inside.
@@KDMCurt I work for Llumar tinting I would use the IRX or the new formula one pinnacle for your vehicle either 15% or 5% on the whole car and a 50% or the clear air 80% on the windshield
They didn’t have any available at the time and for the insane mark-up they are charging for them now I’m perfectly fine with the GT1. As long as it had the twin turbo V6 I was fine with it haha.
![First 5 Must Have Mods!!! [2019 KIA Stinger GT]](http://i.ytimg.com/vi/UayQLr1Fg0A/mqdefault.jpg)
My best Stinger modification is my new license plate which reads STINGRR. I have the impression that the car is now running even faster since I installed it. It cost me $94 here in CT.
I like this guy. He’s the type of relaxed car guy I’d want to be friends with
Thanks I appreciate that!
Just sold my daughter my black one and bought the gray one. LOVE WHAT YOU DID!! I’ll def be copying you🙌🔥😅
Very nice!!
Can you put a link for the GT transfer decal for the driving mode nob? Thank you!
Nice vlog dude, you didn't over do it w/the ride, thanks for sharing...
Thank you I really appreciate that!!
Nice job wish the Menards were gloss black to mach the area they attach to
Yeah that would have been nice. Unfortunately the only gloss ones I saw were carbon fiber and they were expensive!
Normally the drl for gt, gt1, gt2 is at the bottom of the lamp. I want a stinger and never was able to find anyone who got the better looking drl on the GT1/GT2. How did you get the gt-line drl? Did you swap the headlamps?
These are the stock headlights for the ‘22 GT1’s in the US.
Looks awesome! Thanks
For adding the links to the mods I want that tint for the taillights and that spoiler would look nice in gloss black or color
Matched.
Hey man where did you find that little GT sticker? Thanks!
KDMWarehouse sells them.
When are you going to mod it with actual performance increasing parts tho lol...
Playin bro I'm playin
Dang you’ve been busy, haha! So far I’ve done
-BMS air intakes
-DC Strut braces
-ADD W1 Dual BOVs
-Konig Wheels
and I have some JA lit air scoops that just arrived, I’ll be doing a video on them soon.
Looks awesome! I got a 21 ceramic silver, and I’m going for a similar look. Where did u get your devils claws, rain guards, and the paddle shift extensions? I just got a set of front devils claws off eBay, but they seem kinda cheap, almost like a wooden texture, hope it works.
I put links in the description for everything if you want to check them out, I actually got my devils claws from KDMWarehouse but I also found the same ones on Amazon. Yeah the texture is a little strange but it seems to hold up well.
Did you have to use heat on those side reflector tints after you put them on? How are they holding up as well?
Can you put the link of the black tint
Awesome video I just bought myself a 2022 Kia Stinger GT1. Can you give me link to the side taillight covers?
www.undergroundgraphics.com/products/kia-stinger-tint-inserts?variant=36822622863517
Make sure you switch the little drop down menu to “rear side reflectors”
wherd u get those tints for the tail lights
My buddy did it with Vvivid Vinyl.
Does anyone know where you can get the cover for the air intake behind the front wheels? Been looking everywhere and can't seem to find it =/ Hate that stones get caught in there and it can potentially scratch the side of the car.
Dope video bro 🔥what kind of wheels are those?
These are Konig Oversteer wheels.
Do you know if much has changed with the 2023 model? That's what I have and I'm not sure if these mods would work on it.
All these mods should still work. Kia didn’t make any body or engine changes to the 2023 Stingers.
Did you get those vinyl strip for the red that goes along the back sides of the car on Amazon too?
Do the light mode for the grill it’s so dope,well fog lights
Idk why I’m just now seeing this comment my bad but don’t worry I’ll have something cool for the grill just you wait and see haha!
What size and offset did you get for the rims?
where did you get the tint covers for rear tail light extensions?
I got them from here - www.undergroundgraphics.com/products/kia-stinger-tint-inserts?Facebook_UA&variant=36822622896285&IGShopping&Social
When u blacked out the side reflectors did u have to use a heat gun?
Nope, just a hard detailing card to smooth it out and a razor blade to cut off the extra.
I like how many people mod those side markers. The side markers only look good with red Stingers lmao. I'm betting the side markers blacked out would look really great on a black Stinger.
Looks great but just a note, cheap stick on mods don’t hold up too well at over 140 MPH. Don’t know if u intend to drive that fast but I have yet to meet a fellow Stinger owner that doesn’t.
Already driven that fast and everything is still attached. If you know how to treat the surface properly while cleaning you can get good adhesive strips to stick like super glue.
As long as the surface was prepped properly. Authentic 3M automative adhesive is the real deal, it’ll hold
another question the link says 2018 for door latch covers, assuming they fit all models since you have a 22?
Yup, they fit all years and models of Stinger!
I definitely need the GT sticker
kdmwarehouse.com/collections/kia-stinger/products/kia-stinger-gt-drive-mode-dial-transfer-in-red-or-white
What size rims and tires are you running.
I have been trying to look for tail light tint for the back of my 2022 kia stinger but i can’t find one for the new model of tail light. Do you know someone that sells the pre cut tail light tint?
Unfortunately I have not been able to find a tint overlay for the 2022 lights yet. If I do I will make a video!
@@KDMCurt thank you !
What kind of cleaner do use use before applying canards?
I usually wash the surface really well with soap and water and then wipe it with some 91% rubbing alcohol.
Hi wo hast du gekauft das alles ? LG
Where did you get the decal for the drive mode control knob?
kdmwarehouse.com/collections/interior-enhancements/products/kia-stinger-gt-drive-mode-dial-transfer-in-red-or-white
Where did you look for those modes
I usually use eBay or Amazon for most of my mods.
what specs did you get on the wheels? offset and width?
Great job it looks phenomenal 👏👌
Thank you I really appreciate that!!😄😄
Could you do this on the 2.5 gt-line?
Yes, everything seen here will work with the GT-Line as well.
I have a question how much did you get for you car considering all that was done to it so I can know what to expect ?thanks
Got $15k for my Optima. Probably could have gotten more but I didn’t haggle much.
Love the look..but wish you would’ve painted or dipped the front devils claws …Still dope…I got mine painted at Maco for $25
Where did you find rain deflectors for the 2022?
The body of the 2022 Stinger (except the exhaust tips and tail lights) is the same as the earlier Stingers so all the older stuff fits. Trunk spoilers, window rain guards, front bumper splitter, devils claw canards, a bunch of stuff.
Where did you get the alloys from, I like the factory ones, but couldn’t find anything I like.
Had them ordered at a Discount Tire from their website.
I couldn’t get the vinyl to sit right on the side reflectors :/ I took it off.
Ah sorry to hear that. It took me a few try’s to get it to sit right as well. You just have to take your time and be meticulous.
where are you located in Texas and do you do other kia owner mods
I’m in Dallas, depends on what you need help with. What are you trying to do?
We’re did you get the gt sticker
kdmwarehouse.com/products/kia-stinger-gt-drive-mode-dial-transfer-in-red-or-white
Where did you get the sticker for the drive mode from?
kdmwarehouse.com/products/kia-stinger-gt-drive-mode-dial-transfer-in-red-or-white
Great job, good taste. Is that the ghost grey?
Yup it is, however here they call it “ceramic silver” for some reason.
@@KDMCurt my wife has the 2022 Telluride in wolf grey. I want to get a matching stinger 👌
Well done! Looks great
Thank you!!
Link for the gt transfer decal?
kdmwarehouse.com/collections/kia-stinger/products/kia-stinger-gt-drive-mode-dial-transfer-in-red-or-white
@@KDMCurt mvp
I love your channel champ, can’t wait to get a stinger 🔥🤝🔥
Thanks so much for the support 😁 they really are a fun car to drive!
@@KDMCurt I know bro, my pops has the 3.3t G70 & I fell in love with the platform since day 1
where did you get the rear strip blackout vinyl from?
Yeah I need to know this as well hope we get a reply
Got them from here - amzn.to/3AIRbks
My bad for the delayed reply for some reason I didn’t see the notification for these comments but here is where you can get the vinyl tint for the reflectors - amzn.to/3AIRbks
@@KDMCurt no worries, thanks for the link. I got myself a ceramic grey 2021 model GT2 and I love it.
Looking good my boi
Thank you, there’s more to come!
Love it we did a lot of the same mods! I’m looking for the back claws I’m about to try and record a video with my mods!
Awesome!!
Good work! Looks sick!
Thank you!!
Yo can you do a monthly payment break down video
Yeah I’ll look into doing a cost estimate video for ownership and maintenance soon.
@@KDMCurt I wanna get one not sure if I should go new or used but I definitely want one, saw one in person and was very impressed
Nice job man
Thank you!
I had those on my 2019 Kia Optima I took them off cause they covered my Crome trim on the window I went to car I’d and found some that go on the inside oh the windows rather than mess up the Crome strip on my windows
What are the wheel specs?
Front - 225/40zr19. Back - 255/35zr19
Congratulations 🎊!!
Thanks!😁
love the stinger. Curious what made you not go with the new K5? Great vid tho 👍
Availability of the car itself and mods. If I traded for the K5 I was going with the GT and I couldn’t find a single one within the state at the time. Also, getting the K5 GT would mean waiting for a lot of mods due to the new 2.5L engine. But this Stinger was fresh off a truck a few miles down the road from me and I learned the engine bay and exterior stayed the same for the most part so all the old mods still work.
…and a little bit the speed haha!
@@KDMCurt truee didnt think of that lol. good choice tho shes a beauty. I know you gonna wild out with it!
@@eddieg877 haha thanks, yeah I’m trying to start strong!
Nice 👍
Thank you!
Should get that windshield tinted too with air 80 clear film to protect the inside and you #llumarfilm
Yeah I need to get it tinted all around. I thought the factory tint would be dark enough but this Texas heat really gets in through the windows and makes it hot inside.
@@KDMCurt I work for Llumar tinting I would use the IRX or the new formula one pinnacle for your vehicle either 15% or 5% on the whole car and a 50% or the clear air 80% on the windshield
Also I just bought a 2022 Kia stinger gt1
@@nicholashanley9526 very nice!
Kia is COOL
They’ve really upped their game in the recent years.
@@KDMCurt yes. I have optima phev, and I want kia carnival 2021, but it costs money)))
🔥🔥🔥
Thanks! 😄
I like it
Thank you!
👍
Dope
Thanks!
I like your car ima buy the gt2 though
It's like I'm happy for you, but at the same time I feel like you're cheating on the Optimas.... and I'm totally jealous lmfao
Hahaha well when you put it like that….🤣🤣
Why didn't u buy a gt2 its superior?
They didn’t have any available at the time and for the insane mark-up they are charging for them now I’m perfectly fine with the GT1. As long as it had the twin turbo V6 I was fine with it haha.
.
Where did you get vinyl tinter?