Thanks for watching! We hope you all stay safe and healthy during these difficult times. If you're working on your tractor during this time, be sure to look up iSaveTractor.com for parts for your vintage cast iron small engines. We are still open and shipping orders normally. Thank you for saving the tractors! EDIT: P.S. You all have made Lucas very happy! Hoping to keep the fire in him to eventually become my right hand man and take over for me!
Just got an Ariens/Gravely GT17/M18 w the tiller & 48in deck for free from a friend along with a 73 sears st16 for $100. The motor is good just needs the home-made ignition system I place of the solid-state.
Your son did a fantastic fantastic job. Keep up the good work buddy! Have you ever considered building or redoing more garden equipment for your tractors? Maybe a moldboard plow and disc harrow
I have to share some info I have about the 3 point on the Pmax with the tiller. You are supposed to pull the pins so that the adjusters are floating with the tiller. I am sharing because I had no idea and it prevents breaking a flex disk. This enables the tiller to hop up. Maybe you knew but it was news to me.
The rear PTO clutch can be hard to find. Try simpletractors.com. as far as moving your camper. You would need a dolly to take the tongue weight and the tractor can pull it around.
I just subscribed because I really like the quality of the videos and could you make a video on how to clean rust off of a cast iron killer engine? I have one for a 310-8 Wheelhorse but I’m worried I might clean it wrong and mess something up
I Just picked one up the big sister 9020 from the scrap yard. How do I know if a loader, mower deck, tiller....can fit it, where do I go to find attachments, I am in utah. What and where can I get a carburetor for it? The one it has is all torn apart and sitting in what is left of a ziplock bag.
Hey Norman I love all your videos. I know you got the simplicity PowerMax video here but have you ever considered on doing anything on the simplicity sovereign series tractors?
Absolutely. I try to time videos with products we're developing. But when we turn up the heat on more briggs engine parts, I will have a ton more simplicity's on this channel. Thanks for commenting!
Thanks for watching! We hope you all stay safe and healthy during these difficult times. If you're working on your tractor during this time, be sure to look up iSaveTractor.com for parts for your vintage cast iron small engines. We are still open and shipping orders normally. Thank you for saving the tractors! EDIT: P.S. You all have made Lucas very happy! Hoping to keep the fire in him to eventually become my right hand man and take over for me!
Lucas did great! The Simplicity did an excellent job as well!
Excellent job Lucas
Great job Lucas!!!
Fantastic job Lucas, great video.
awesome job Lucas!
Lucas done an awesome job
great job lucas
Good job Lucas
Top notch footage Lucas
good job!!!!!!!
Great job filming Lucas!!
Thanks Lucas for a good job showing dad plowing garden👍
Good job
Nice job Lucas! Made the video great 👍
Nice flying kid 👍
Nice aerial footage Lucas!
Good job Lucas with flying the drone
good day of work there Norman!
Awesome camera view!
Great job on the video
Lucas you rock🤘🏼🇺🇸‼️
Nice job on the footage and nice tractor
Awesome job young man piloting that drone!!!
Great job lucus
Great tractor!, wish my 1964 Allis chalmers B-10 still ran. Now it just sits in my garage, probably a connecting arm that blew about 5 years ago..
We have connecting rods for you if you want to fix it
Great job with the drone Lucas I enjoy your video’s Norman
Excellent piloting Lucas!
Lucas nice job buddy!!
Damn nice tractor they shouldn't have stopped making them , and yes thanks for the drone video !
shout out to the boy.. dang good job ..
Great video !! Nice job and angles with the drone Lucas !!! Stay safe !!
Nice drone job Lucas!!!
👌 Lucas
Nice dirt you have there.
Excellent work with the drone lucas.
Well done Lucas...You make it look to easy to fly those drones.
@Lucas Big Shout from NorWest NC... keep your ole Man in line with garden!! learn all you can from him!
Nice job on the drone footage!
great job son.
Great job with the drone work bud!!! Awesome video!!!
Very very nice Drone footage young man
Lucas you did a great job ! Will put you in charge! Lol
Lucas, Good piloting of the drone!
Du super matériel 👍
Merci pour cette vidéo 😉
Nice job with the drone footage Lucas!
Lucas, that drone footage is phenomenal!
Great camera work Lucas.
Great job Lucas, make sure you spend quality time with your dad in the shop so you can learn the trade. Long live isavetractors, stay healthy.
Awesome drone work!!!! It made the entire video a thousand times better!!! Thumbs up!!!
Great job Lucus!
Way to go Lucas!! You are the drone king!!.great job helping your dad!!
Nice camera work Lucas. You did a great job! 👍😁
Ole girl does a nice job!! Love the drone footage!! Out standing job!!
Damn that simplicity is a workhorse.
Powermax!!
🥇🏆
😎😎
great Job Lucas you could pilot my drone any day, awesome job.
I got say. That is an absolutely beautiful restoration!!
One day I’ll have my own place and a garden tractor! Been working on it for years, and I’m getting close even though prices are so high!
Keep at it!
Thank you Lucas, love the drone footage.
Regards to your son, nice flying . Fredrik from Sweden
We'll start calling you Captain Lucas. Great job flying that drone. Thanks for posting.
Thanks from Spain to both Lucas and Norman!
I was going to write the same thing! Saludos!
Pablo Fernández small world with Internet. I’m in Kentucky, US.... How is your weather and do you have hot and cold season ? Thanks 🙏
Lucas GREAT job on the drone footage thanks for helping dad out .
Well done, Lucas!!! Nice steady movement...
Wonderful tractor and great footage! Awesome job Lucas!
Awesome job, Lucas. Great memories working with your Dad. God Bless from Phoenix. Russ
Wow Lucas, great work with that drone!!!!! 😄
Just got an Ariens/Gravely GT17/M18 w the tiller & 48in deck for free from a friend along with a 73 sears st16 for $100. The motor is good just needs the home-made ignition system I place of the solid-state.
Great drown video, ho yeah! The tractor was nice too!
Good job lucas👍 you should continue your dads work someday👍🇺🇸
Nice piloting Lucas !!! Those little drones aren't very easy to fly for most people.
Lucus👍👍👍👍👍👍
The drone shots made that tractor look all the better! Nice dirt!
Lucas is one hell of a drone pilot. If I flew one it would end up in a tree
Your son did a fantastic fantastic job. Keep up the good work buddy! Have you ever considered building or redoing more garden equipment for your tractors? Maybe a moldboard plow and disc harrow
Yes and yes! All on the schedule for this year.
I have to share some info I have about the 3 point on the Pmax with the tiller. You are supposed to pull the pins so that the adjusters are floating with the tiller. I am sharing because I had no idea and it prevents breaking a flex disk. This enables the tiller to hop up. Maybe you knew but it was news to me.
Nice video and the drone footage is great! A new perspective for the channel.
Awesome job Lucas keep up the good work. I believe your a natural with the drone. Thanks for the great footage!
Lucas, flight instructor at 10! Very impressive. Keep up the good work.
Thank you Lucas for the drone footage
Pretty nice setup. Up here we still have all kinds of snow. Good work with the drone👍
Great Job Lucas!!! Might have a future as a commercial video drone Pilot, like Trent Palmer (you can find him here on UA-cam) !!
great video and a very nice job on the drone work Lucas, your an awesome pilot.
Fantastic job on the camera work bud. Way to go! Someone gotta help dad out and you're the man for the job!
Good job Lucas, you did great buddy. Thats a nice tractor Norman. Wished they still made em.
Great job on the video Lucas! The tractor preforms well!
Awesome drone coverage there mr. Lucas he operate that thing like a pro
Lucas you say, well now young sir you are handling that drone like a master "dronesman." Great job!
Very cool to see the Powermax put to work after her restoration. Nice work piloting the drone Lucas! It adds a very cool element to the video
Put that boy on the payroll!
Where could I get the pto clutch for the rear of a 4041 simplicity. Also could I move a camper that is 9,000 lbs with it
The rear PTO clutch can be hard to find. Try simpletractors.com. as far as moving your camper. You would need a dolly to take the tongue weight and the tractor can pull it around.
Awesome job with the drone Lucas!
Where did you find the tiller for the 4040?
I just subscribed because I really like the quality of the videos and could you make a video on how to clean rust off of a cast iron killer engine? I have one for a 310-8 Wheelhorse but I’m worried I might clean it wrong and mess something up
Hi 👋 Save The Tractors!
Good job lucas. Better than I did, first time I flew (and last) i lost my drown...found it at my neigbors a couple weeks later.
Do you have video on the clutch spring ( the pedal operated) one ? I’m working on a 9020 . replacement and adjustment ? Thanks
I Just picked one up the big sister 9020 from the scrap yard. How do I know if a loader, mower deck, tiller....can fit it, where do I go to find attachments, I am in utah. What and where can I get a carburetor for it? The one it has is all torn apart and sitting in what is left of a ziplock bag.
Super awesome job Lucas. The only thing I could do with it , is bounce off the walls . Keep up the great job bud. 😄👍.
Hey Norman I love all your videos. I know you got the simplicity PowerMax video here but have you ever considered on doing anything on the simplicity sovereign series tractors?
Absolutely. I try to time videos with products we're developing. But when we turn up the heat on more briggs engine parts, I will have a ton more simplicity's on this channel. Thanks for commenting!