Im sooooo so happy this video is still around.. Ive seen this a couple of years ago and have sworn to my 2 sons we were going to build this. Now that a few years have past and they are old enough AND i have a little desent understanding of 3D printers it is time to make this with my 2 sons. 😍 This is going to be such a cool winter project to do with them ! I cant stress enough how happy i am to still being able to watch this video as it will be of great help.. Maybe the partslist is not up to date anymore, but im sure ill be able to find good alternatives. Thank you so so much for putting your time and effort i this video for others to enjoy and try and build it aswell.. You are a legend !!
@@CraftChannelYT Ben 3-4 ay önce Laimer tarafından tasarlanan fırçasız motoru(3d printed brushless motor) yaptım. Bence bir göz atmak isteyebilirsiniz. Hoşunuza gider gibi ama biraz meşakkatli bir proje olur ama bittikten sonra çalışmasını görmek daha güzel.👍🏻
I started this project in September last year and it stalled.. I have the hull printed, sanded, with epoxy and the putty on.. sanded again and primed. I now have time to continue on this project and I'll be finishing it next month. I'm planning to FPV it too. We'll see how it turns out.
guess nows not the greatest time to tell you... but you should have printed the stern another inch deeper.. Your strut angle is too high. That's why it's hopping. You have enough weight with 4x3s to prevent that hop or "porposing" effect at speed. Need to redo with adjustable drives. I may be wrong, but looks like you sunk the adjustment set screws below the body in epoxy? Ditch the dual pickus in the bottom for a dual pick up rudder, with a dual pump system. Just use the pickups in the rudder to supply the pumps. Constant cooling, sitting still or moving! Plus, it looks cool with water squirting out the exhaust ports, sitting still! (Pumps run off the RX. (3-6V) Not sure liquid steel would be my "sealant" of choice. Does it hold up to high speed and vibration / crashes, very well? Any cracking showing through the paint after running? Use mercury PTFE marine drive grease. It doesn't sling out as bad as that thin stuff. Plus, it has better friction modifiers. Nice rudder! But the boat would benefit from a dual pickup, the bottom pick ups, disrupt the ride surface, when it planes out. Scuff the bottom of the hull with light sand paper. No gloss there. It helps create more of a "hydrophobic" effect. Your hull will be capable of going faster. Check out Chris Hoffman, owner of Das Boata props. He's on fb and has website. I think it's www.dasboata.com You want the super geico twin, screws! Those will turn that boat in to a UFO! I run them on my Zelos 36 and Geico 36. Awesome props! Switch over to 2x6s 5000mah +++... 100+C, packs. Weight reduction and mass centralization. Ball bearing adjustable drives... major upgrade of the brass liners.. they burn out over time and allow prop wobble.. costing you speed. Good luck!
Great video, wonderful model, I have now imported the STL into SketchUp to make changes, I have already made covers for the Flexible Shaft Bracket which are then glued in with epoxy or silicone, foam would not be my thing right now.
Thank you for this upload. I am at the paint stage. I did reinforce all the seams with 3/4oz fiberglass strips and epoxy with micro balloons. Also printed the front 1/3 with infill for ballast and structural rigidity. Will start on the hardware and electrics shortly. All components were purchased from offshore electrics.
wow ridiculous amounts of work, good job bruh. I love my RC boats this is superb, prob worth 4-5 times what the Proboat one is worth with all the hours of work you put into it. imnpresive to say the least. wanna race? hahaha
Have a quick question? As i watched ue kickass video,and helping me learn better with my printer,i was to make this as a shelf queen no electronics,question is that i test printed the front piece and it wasnt printing hollow as ur is,do i need to adjust the setting to ur stl files? And if so how?? Thanks man...love this channel
Thank you so much for uploading this whole process, I think this will spare me a good amount of time... I do own a 3D Printer but I'm not so familiar with things like weight positioning, choosing the right electrical components and so on. An RTR model of this is about 600-800 euros in Germany, would you be so kind an tell me how much your build cost when finished? Or at least if you stayed under that price or paid more? :)
Hello from Germany, your videos here are just phenomenal and really great to watch, congratulations. I can't say yet whether I dare to do it, but I really like your configuration with motor/ESC etc. here and it will certainly be a great help for many. Of course also for me ;-). Now, since I want to buy some of your components, I noticed that not all of them appear in your descriptions. This includes, among other things, the Grease Oil. Can you tell me who the manufacturer is?. Unfortunately, even with a still image, I couldn't find out or where to get the grease. Since I don't know the composition, I would be really grateful for the info. Greetings to you from Thomas❤
Me dejaste sin palabras! Te quedo increíble!! Son los típicos proyectos que me gusta empezar pero luego abandono a mitad jajs. Si que me gusta probar con algo así, pero la imprimiría al 50%, que para empezar en ese mundo iría sobrada me imagino. Sabes cuanto gastaste más o menos en total? Xq si fue mucho, me voy a otra cosa jajajs
Im sooooo so happy this video is still around.. Ive seen this a couple of years ago and have sworn to my 2 sons we were going to build this. Now that a few years have past and they are old enough AND i have a little desent understanding of 3D printers it is time to make this with my 2 sons. 😍 This is going to be such a cool winter project to do with them !
I cant stress enough how happy i am to still being able to watch this video as it will be of great help.. Maybe the partslist is not up to date anymore, but im sure ill be able to find good alternatives.
Thank you so so much for putting your time and effort i this video for others to enjoy and try and build it aswell.. You are a legend !!
Video paylaşım çok hoşuma gitti elinize emeğinize sağlık TEŞEKKÜRLER
Güzel yorumunuz için teşekkürler
Never would’ve guessed that thing was 3d printed before yountold me 🤯😍
Thanks :)
Сдраствуйте вы просто супер молодец сделать Такую красивую игрушку не каждый бы не смог бы заделать просто класс просто супер
Спасибо за хороший комментарий
🙏🙏🙏 şapka çıkartılır şahane yapılmış müthiş bir sürat, elinize emeğinize sağlık.
Teşekkürler
Anca bukar olur tebrikler emeğinize sağlık👏🏻👏🏻👏🏻
Teşekkürler
Как круто когда руки золотые ! Вы молодец ! Очень круто получилось ! 🎉🎉🎉🎉🎉
Здравствуйте,GEICO получился суперовый просто бомба,владельцу большой респект за такую проделанную работу.И огромное спасибо за выложенное видео,
Спасибо за хороший комментарий
Team #missgeico görse kıskanır
#proboat liginde siz daha iyisini yapana kadar en iyisi bu 👊🏼👊🏼👊🏼
Destekleriniz için teşekkürler
Fuc…. Awesome 👍🔥👍🔥👍🔥👍🔥
:)
Harbiden üst düzey bir çalışma olmuş .eline sağlık.
Teşekkürler
So Cool 😎 man after my own heart or steptoe and son👍
Thanks
Thank you for this , you are a pro ! This is heaven on earth and you are the creator of it.. thanks from the Netherlands .
Thank you ❤️
Hi I love UA-cam videos and having UA-cam is a good thing
super olmuş . detayları ve gidisi çok guzel
Teşekkür ederim
Yine harika bir çalışma, tek kelime ile muhteşem 👍👍👍
🙏 teşekkürler
başkan arabayıda bi yıkat be :) rc tekne muazzam bu arada
Not bad at all but seems like a lot of work considering the 3d printing.
Good job.
Thanks for the nice comment.
Perfect 👍🏻 omg your so very smart
Çok muhteşem çok güzel olmuş ellerine sağlık abi
Teşekkürler
Üstat mükemmelsin. Çok hoş duruyor. Devamını bekleriz 😀
Güzel yorumun için teşekkür ederim. Daha güzel projeler üzerinde çalışmalarım devam ediyor. Bittikçe paylaşmaya devam edeceğim.
@@CraftChannelYT Ben 3-4 ay önce Laimer tarafından tasarlanan fırçasız motoru(3d printed brushless motor) yaptım. Bence bir göz atmak isteyebilirsiniz. Hoşunuza gider gibi ama biraz meşakkatli bir proje olur ama bittikten sonra çalışmasını görmek daha güzel.👍🏻
Very good work Super.🙋🙋🙋🙋🥰🥰🇪🇪🇪🇪🇪🇪🇪🇪🇪🇪
Trabajo perfecto envidiable!!
Soluksuz izledim. Mükemmel bir video.
Güzel yorumunuz için teşekkür ederim
Muhteşem RC boat olmuş
Teşekkürler 🙏
Magnifique tres bonne trabail
Merci
*Quá tuyệt vời bạn ơi*
Cảm ơn
I started this project in September last year and it stalled.. I have the hull printed, sanded, with epoxy and the putty on.. sanded again and primed.
I now have time to continue on this project and I'll be finishing it next month. I'm planning to FPV it too. We'll see how it turns out.
Mukemmel olmus, printer su an basladi.
Harika 👍 👍 👍
Mükemmel bir çalışma 👏👏👏
Teşekkürler
marvelous creation and it doesnt look 3d printed just the same as other projects
Top, profissional job, i change the controller to one from rc car
Thank You
For us this is just 22 minutes of entertainment but this spend allot of effort and smart work amazing talent
Thank you for your nice comment
For some reason that windscreen canopy always reminds me of Gypsy Danger,pacific rim. Amazing build. 10/10
Thank you
👍🏼
WoW, AMAZZZinG!!!! Welcome to 2021.. ;-))
harika harika harika tek kelimeyle muhteşem
Güzel yorumunuz için teşekkürler.
WOW so Nice 😍😍🥰🥰🤨👌😘😘
Thank you
AMAZING bro . The body of the boat is amazing
Thank you bro ❤️
Oh pinaise 😮😮😮 merci pour ce partage 💪👍
Merci pour ton gentil commentaire
very, very nice great work
Thank You
Fantastic boat! Amazing job! :)
Thank you bro ❤️
wow really superb brother 🔥 🔥 🔥 🔥
Thank you bro
amazing job 👍
Thank You
NICE JOB AMAZING 💯👌
Thank you
Hsyzhzydjzhsksbsksjekejeusyeyeueeuwi
Well done! Very nice job. Thank you for this video. I was wondering how to built one of this beautiful boat. Now I see.
Amazing !
Amazing RC boat
Thanks bro
Muhteşem 👏🏻👏🏻👏🏻
teşekkürler
That’s awesome looks like the real deal 😎🤩👍
Thank You
Emek büyük bu işi hakkıyla yapıyorsunuz inşallah iyi yerlere gelirsin ❤️
Teşekkürler
🚤🛥️⛵🛶⛴️🚤🛥️🛳️🚢🛳️🚢🚢🚢
This is awesome. This is very special ability ! You are gorgeous babe 👍🏼
Thank You
Wow amazing mantaps
Habe mehrmalig gesabbert, ich hoffe das lag am wunderschönen Video!
Amazing make other boat 😍
Teşekkürler
You deserve to have millions of subscribers, bro!! Watching from Philippines.
these are nice boats, i printed 4 boats so far but haven't got to this extreme yet very nice build
Thank You
Did you design them yourself?
@@Koolkole27 No mate but wouldn't be very hard to do on fusion 360
guess nows not the greatest time to tell you... but you should have printed the stern another inch deeper..
Your strut angle is too high. That's why it's hopping. You have enough weight with 4x3s to prevent that hop or "porposing" effect at speed.
Need to redo with adjustable drives.
I may be wrong, but looks like you sunk the adjustment set screws below the body in epoxy?
Ditch the dual pickus in the bottom for a dual pick up rudder, with a dual pump system.
Just use the pickups in the rudder to supply the pumps. Constant cooling, sitting still or moving!
Plus, it looks cool with water squirting out the exhaust ports, sitting still! (Pumps run off the RX. (3-6V)
Not sure liquid steel would be my "sealant" of choice. Does it hold up to high speed and vibration / crashes, very well? Any cracking showing through the paint after running?
Use mercury PTFE marine drive grease. It doesn't sling out as bad as that thin stuff. Plus, it has better friction modifiers.
Nice rudder! But the boat would benefit from a dual pickup, the bottom pick ups, disrupt the ride surface, when it planes out.
Scuff the bottom of the hull with light sand paper. No gloss there. It helps create more of a "hydrophobic" effect. Your hull will be capable of going faster.
Check out Chris Hoffman, owner of Das Boata props. He's on fb and has website.
I think it's www.dasboata.com
You want the super geico twin, screws! Those will turn that boat in to a UFO!
I run them on my Zelos 36 and Geico 36. Awesome props!
Switch over to 2x6s 5000mah +++... 100+C, packs. Weight reduction and mass centralization.
Ball bearing adjustable drives... major upgrade of the brass liners.. they burn out over time and allow prop wobble.. costing you speed.
Good luck!
thanks for the useful information
Great video, wonderful model, I have now imported the STL into SketchUp to make changes, I have already made covers for the Flexible Shaft Bracket which are then glued in with epoxy or silicone, foam would not be my thing right now.
Excellent craftsmanship!
perfect boat
Thank you
Koptu gidiyor #missgeico 🤘🏼
Awesome 😲👏👏👏
Thank you
Beautiful 🤩🎉
Wow you are Machine you can make it my hand wow cooooooooool
thank you
u r a god
Thank you for this upload. I am at the paint stage. I did reinforce all the seams with 3/4oz fiberglass strips and epoxy with micro balloons. Also printed the front 1/3 with infill for ballast and structural rigidity. Will start on the hardware and electrics shortly. All components were purchased from offshore electrics.
Mükemmel 🤩
Teşekkürler
Muhteşem 👍 👏
Teşekkürler
wow ridiculous amounts of work, good job bruh. I love my RC boats this is superb, prob worth 4-5 times what the Proboat one is worth with all the hours of work you put into it. imnpresive to say the least. wanna race? hahaha
Thanks :)
Dam amazing build and I have the ProBoat MG29 and MG36 and you made the perfect of both in one with this ,love it💪👀👍Badass🏁
Thank You
Great manufacturing process and the cure for details!! Fantastic.
Thanks for your nice comment
Nice built....but i want try it with 1 motor/1 esc/ 2 battery etc should i give a try?
Ellerine saglik super olmus vallahi, bizim icinde yap sana zahmet :))
Super la vidéo
simply amazing, you just gained a new subscriber!
thank you for the nice comment
진짜 잘만드셨네요
좋은 의견 감사합니다
Beautiful creature. Have you info about speed? Thanks man
Thank you. Gopro gps 137km/h
@@CraftChannelYT a beast
Love it!
Thank you
Excellent video👍
Helaaaaallll🎈
Teşekkürler
Mantap bang
Terima kasih
Videoları keyifle izliyordum ama tek bir reklam bile çıkmayınca ;
DADINA DOYAMADIM VALLA :)))
Really Amazing Work! I love it
Thank you bro ❤️
Amazing video very nice!!!
Thanks man :)
Amazing work!!!! Perfectly crafted🙏🙏
thanks for the nice comment
@@CraftChannelYT no problem, thank you for actually making me learn a lot from this jajajaja🙏
Great video thanks.
The question I have is how do you print the Geico decals? Please advise.
Thanks, Bill.
Have a quick question? As i watched ue kickass video,and helping me learn better with my printer,i was to make this as a shelf queen no electronics,question is that i test printed the front piece and it wasnt printing hollow as ur is,do i need to adjust the setting to ur stl files? And if so how?? Thanks man...love this channel
Hello, I made the adjustment as wall layer thickness of 5 and occupancy 0%.
@@CraftChannelYT cool ill try that
Magnifico trabalho ...
obrigado
Nice rcboat
Hi sir, new subscriber from philippines, I loves your videos. Very informative. Nice, great, LOVE IT.
thank you
Looks great, I was wondering what is the dry weight without hardware.
Thanks. 700-750 gr.
Mantap 👍
Woow ! buen trabajo!! ¿donde conseguiste las pegatinas?
Conseguí una impresión haciendo una búsqueda en Google.
Thank you so much for uploading this whole process, I think this will spare me a good amount of time... I do own a 3D Printer but I'm not so familiar with things like weight positioning, choosing the right electrical components and so on. An RTR model of this is about 600-800 euros in Germany, would you be so kind an tell me how much your build cost when finished? Or at least if you stayed under that price or paid more? :)
The purchase links and prices of the products are available in the description. Thanks for your nice comment
vaaooowww very good project
thank you
Hello from Germany,
your videos here are just phenomenal and really great to watch, congratulations.
I can't say yet whether I dare to do it, but I really like your configuration with motor/ESC etc. here and it will certainly be a great help for many. Of course also for me ;-).
Now, since I want to buy some of your components, I noticed that not all of them appear in your descriptions. This includes, among other things, the Grease Oil. Can you tell me who the manufacturer is?. Unfortunately, even with a still image, I couldn't find out or where to get the grease. Since I don't know the composition, I would be really grateful for the info.
Greetings to you from Thomas❤
Me dejaste sin palabras! Te quedo increíble!! Son los típicos proyectos que me gusta empezar pero luego abandono a mitad jajs. Si que me gusta probar con algo así, pero la imprimiría al 50%, que para empezar en ese mundo iría sobrada me imagino. Sabes cuanto gastaste más o menos en total? Xq si fue mucho, me voy a otra cosa jajajs
awesome ! what are those two black comma shaped things on the back for ? 16:49
exhaust outlets. I put it as an ornament
SUPERBE !!
Teşekkürler
respekt it is a very ice build but on some places it is varry bad i hope u fix som smol things and than u have a buty