The Gaz-n-Joe Q&A style is a winner !! I used to have to pause your videos to get my head around concepts, but the Q & A style really works, and it sinks in first time 💡 . As always, BIG thanks
nice vidio your proabley fed up people telling you both how helpfull / informitive and extremley brilliant you are....i would just like to say thankyou and keep on going.
Well explained. Cheers for your continued effort gents. As a result; does the switching line has to be higher than the permanent live no matter what? Links
I am slightly confused and not for the first time! why would you have to disconnect the cpc when conduit is being used for earthing purposes? I thought that the conduit would be directly connected to the metal casing which in turn would create an equipotential situation.
Hi. Steel conduit creates a parallel earth path and testing needs to prove the cpc (conductor) is continuous. ua-cam.com/video/r94dJ7ASRTY/v-deo.html Thanks GSH
Whilst nulling the leads; what does it mean if the display on a Megger MFT is showing 0.00 and it is ‘flashing’? I think it means it is registering a MINUS value. Simply null again.
Could you connect your link lead to the buzz bar with the breakers on other circuits switched off to save removing the conductors or would the breaker skew the reading?
I was thinking what's the difference between a prospective fault current test ( ipf ) and a R1 + R2 test. not much by the look of it just that your testing a circuit with an R1 + R2 test and an ipf test is done at the DC with line and earth. - i just needed to say this
In a real life situation where there "may" be hidden earthed metal conduit - there is a possibility that the electrician carrying out the testing would never know about this - so would it not be best practice to remove the CPC from the common earth bar in the CU and then clip onto the individual CPC to carry out the testing. This would guarantee that there is no interference from any parallel earthing route to skew the results.
Hi great video! If the reading from the exposed conductive part was higher than from at the terminal would you record this result? Or do only direct readings from the cpc count for R1 +R2? Cheers!
The CPC is connected to the earth bar in a consumer unit which is connected to the earthing conductor.... which is connected to the greater mass of Earth. Thanks for commenting and watching. Gaz 👍
AM2 or AM2s Insulation Resistance Testing of 2 Way and Intermediate Switching Using Guidance Notes 3 ua-cam.com/video/9AjyWl_2bds/v-deo.html The above link should also be helpful 👍. Thanks Gaz
Both guidance notes 3 & 643.1 of the regs say that you should compare your data to the relevant criteria. You have not even mentioned that, so you only get half the marks in any exam questions about this test method in my class. SMH.
Another well put together training aid from the guys at GSH Electrical. Thanks 👍
The Gaz-n-Joe Q&A style is a winner !! I used to have to pause your videos to get my head around concepts, but the Q & A style really works, and it sinks in first time 💡 . As always, BIG thanks
Your very welcome 👍 Gaz
Got much better understanding of testing CPC continuity, thank you 😅
Thanks 👍🏻
Thanks for another great teaching video. Bring on Insulation Resistance!!
nice vidio your proabley fed up people telling you both how helpfull / informitive and extremley brilliant you are....i would just like to say thankyou and keep on going.
Massive thanks for the kind words and taking the time to message 🦾 Gaz
Amazing Gaz and his Pal 👍
Great videos
Thanks
Great tips for inspection and testing!
Amazing Gaz and his pal
Brilliant stuff!👍
Perfect Duo❤
Thanks 👍🏻
This video is very useful.
Well explained. Cheers for your continued effort gents. As a result; does the switching line has to be higher than the permanent live no matter what?
Links
Great video guys thanks.👍
Thanks for the support 👍
I am slightly confused and not for the first time! why would you have to disconnect the cpc when conduit is being used for earthing purposes? I thought that the conduit would be directly connected to the metal casing which in turn would create an equipotential situation.
Hi. Steel conduit creates a parallel earth path and testing needs to prove the cpc (conductor) is continuous. ua-cam.com/video/r94dJ7ASRTY/v-deo.html
Thanks GSH
great video guys thanks.
Thanks for the positive feedback
Nice job
thanks for the explanation
well done guys is there a J Robinson fan club
ua-cam.com/channels/kTkG9PHEycUd-Ps4oPW-vw.html
😁👍
Whilst nulling the leads; what does it mean if the display on a Megger MFT is showing 0.00 and it is ‘flashing’? I think it means it is registering a MINUS value. Simply null again.
in the am2s are you required to test r1+r2 from each lighting point and switch line? thanks
Yep 100%
@@GSHElectrical thank you
r1+r2 test results so what is maximum value acceptance of continuity of protective conductors?
Could you connect your link lead to the buzz bar with the breakers on other circuits switched off to save removing the conductors or would the breaker skew the reading?
⭐️
So you test between CPC-COM at both of the two ways and is this the same depending on the different ways of wiring two ways?
I was thinking what's the difference between a prospective fault current test ( ipf ) and a R1 + R2 test. not much by the look of it just that your testing a circuit with an R1 + R2 test and an ipf test is done at the DC with line and earth. - i just needed to say this
In a real life situation where there "may" be hidden earthed metal conduit - there is a possibility that the electrician carrying out the testing would never know about this - so would it not be best practice to remove the CPC from the common earth bar in the CU and then clip onto the individual CPC to carry out the testing. This would guarantee that there is no interference from any parallel earthing route to skew the results.
Hi. Totally agree 👍 thanks for taking the time comment Gaz
Hi great video! If the reading from the exposed conductive part was higher than from at the terminal would you record this result? Or do only direct readings from the cpc count for R1 +R2? Cheers!
The highest reading Alex 👍🏻
Good vid
Does the CPC always connect to Earth then? Sorry I just want to be sure I'm right before I memorise it for good. Thanks for these videos :)
The CPC is connected to the earth bar in a consumer unit which is connected to the earthing conductor.... which is connected to the greater mass of Earth. Thanks for commenting and watching. Gaz 👍
Does it matter where in the intermediate switch you carry out the test?
AM2 or AM2s Insulation Resistance Testing of 2 Way and Intermediate Switching Using Guidance Notes 3 ua-cam.com/video/9AjyWl_2bds/v-deo.html
The above link should also be helpful 👍. Thanks Gaz
Is this an acceptable method to use in the AM2?
Yep 👍. But always talk to your assessor. Gaz
Cheers gaz!
Is the link wire rated for 230 volts or is it not important here
Remember it’s a dead test Michael 👍🏻
Sir cpc full form?
9:14 well fed
Both guidance notes 3 & 643.1 of the regs say that you should compare your data to the relevant criteria. You have not even mentioned that, so you only get half the marks in any exam questions about this test method in my class.
SMH.