Very good informative video. What I like to do when placing the spacer inside the wheel is to have a screwdriver through it. 1. Place the bearing inside the wheel. 2. Place the spacer inside the wheel. 3. Take a screwdriver through the bearing and the spacer then turn the wheel and the screwdriver upside down and then press down so that the bearing goes inside the wheel with the pressure of screwdriver handle. 4. Place the second bearing on the other side of the wheel and do the same again. Extra tip: To easily get the bearings out of a wheel: Use a screwdriver and wiggle and turn around until the bearings come out. Also remember to often clean the bearings and lubricate them with universal multi grease. I use multi grease on every moving part of my wheels and trucks.
I don’t even have my own board yet and I love watching your videos. It is so refreshing to see an honest UA-camr that explains things well and cares more about helping people than anything. Keep it up 🤘🏼
Again with a Great video brother!! Just and FYI to anyone wondering, YOU CAN BUY the 40T pulley kit for the evolve from iCloud and it WILL work on your Onsra Black Carve Dual Belt. You will need to add a spacer but I am running the evolve pulley kit with no problems. They do come with belts in the pulley kit cause the stock belts are too big. I LOVE this setup. I hit 26mile range before my battery died, top speed 39MPH top speed. Granted I’m 165lbs. USE Rama’s discount code you’ll get $10 off the wheels and $10 off the pulley kit saving you $20! Thanks again for the content bro! Keep up the great work!
Tony, thanks for the awesome comment and the insight. That cool that the pulleys work on the onsra. Holly shit! 39mph you sir are crazy! Thanks also for the code shout out. I am so glad they worked for you. I should have another code coming soon that will be really cool for the viewers.
Ramatorix eSk8 reviews indeed! 39MPH!! I pee’d my pants just a little bit. I wasn’t expecting to hit that speed when I punched it in mode 3. On another note you were definitely right with the range and acceleration on the 105’s! Thanks to you I found my perfect setup! Thanks again and keep those videos coming
OnsraUSA yessir indeed you can make it work! You will need to add a spacer to the back bearing that comes on the pulley kit get the pulley and drive train to perfectly line up otherwise it will rub on the motor mount. I will still end up ordering the 40T pulley kit from Onsra though cause they are made of metal instead of the plastic. Keep up the great work Onsra! Fabi! I’m loving my black carve!
Thanks mod mod! I am excited and hope they handel the hills well without throwing me off the board from a stop lol. Its going to have more power now so I might have to use pro or custom mode lol. I will try to get another video up by the end of the week or so.
Once again great video! I do recommend to not completely remove the belt cover for people that want to use cloud wheels on a WowGo though. Without them it's easier for dirt or gravel to get in and damage to your belts or even the motor pulleys. I used a Dremel to remove about 2-3 mm (0.11 inches) from the belt covers. You probably can also use sand paper or a really sharp knife to do this. Thanks again for all your great videos!
I’ve seen many comments that people rather take belt covers off altogether to stop small stones getting caught in the cover itself. Boards looks awesome with the cloud wheels.
I run my wowgo without covers and it gets about 10x the amount of rocks in the pulleys. I have snapped 2 belts in 70 miles since taking the covers off. Before that 0 belts broke in 210 mile. Thats just my experience and i am talking small rocks like in this video.
Great tip on the soldering iron to loose bolt :) Verreal RS looks like a really good board at a great price. The virus thing is putting a damper on fun.
Thanks for the feedback. It does not work all the time and sometimes takes a while but not as long as removing it after it strips lol. Ya this was not the summer to buy a bunch of boards made in China lol. At least Onsra and Evolve have stock.
Sorry I’ve been kinda quiet, I’ve finally got my onsra set up with the 120 cloud wheels and got my second black carve in and just been cruising around with my cousin. Once again another fantastic and detailed video! So recently what board have you been riding for leisure riding and not video purposes? Also I’m very glad to say I was very pleased with the conversion process on the onsra black carve for the cloud wheels and Abec pulleys. Smooth as butter no hassle lol.
Its good to hear from you again. I cant agree more with putting cloudwheels on the onsra. Put pulleys and belts on, put wheels on, thats it. As for the board I like ridding the onsra the most. I hope that will change with these 40t pulleys. The evolve has been gutless up hills. There was a few time that I thought I would have to get off and walk or start pushing to help the evolve. I am with you man. I have a few more videos to knock out then I am just going to go for a few rides and not even bring the camera. Just go ride lol. Stay safe and enjoy the rides with the family.
@@DocToxicTF2 i have a bunch of videos on those wheels. I have them on the evolve, verreal, both onsras, and the eovan. There is a link and code in the description if you want to save a little $ take care
You rock! Thanks for the video. Didn't even know cloud wheels were an option on GTR. I can hardly wait to buy them and try them out on mine. Have you tried using Abec 107s? When combined with larger gear they are very powerful and yet soft.
What wheel setup did you choose on your remote in the settings? Since the cloud wheels and belts are larger than the evolve street setup I moved my setting from 97mm/32T to 107mm/38T since it's the closest you could get to the actual size of the cloudwheel setup.
i love my evolve board .. i have the 7 ' of road wheels , but i was looking put some street wheel on the with little to no effort. any ideas ?? not adjust motor mounts.. belt yeah... .... ride safe later ..
So I dont think you can put street wheels without adjusting the belts. If you are looking for cloud then the kit from them is nice and it was easy. For PU wheels I would buy the wheels and pulleys from evolve. Their PU wheels are actually really nice in my opinion. Hope this helps.
back again! got 105 on mine as well. soldering iron worked great. what did you set for the wheels/gears in the remote? i'm guessing 107m 38T is about as close as you can get with it because I can't find anything else.
Pretty sure Evolve doesn't use Loctite for the motor screws. They use it on the screws connecting the base plate to the motor plate and that's it. Also can you post a video of you riding with the wheels on? What settings did you input in your remote so the motors didn't overheat? How long have you had your board for?
Austin, you may be correct. I did not take the screws all the way out to confirm. Was told there was lock tight so I just treated it like there was. Thanks for your comment and the insight.
@@Ramatorix Yeah they can't use it on the motors because people who have the 2 in 1 boards (all terrain option) have to adjust their motors whenever they change from AT to street. I have had a bunch of problems with screws coming loose while riding and even some falling out (Never with the motors though). My advice to anyone who is in Street mode a lot is to go over with Loctite any screws that you don't have to adjust. I literally had the three tiny hex screws that keep the motors together fall out and break my motor. I've only had the board for 6 months. It came with a faulty AT belt, so I ride in street predominantly because I haven't gotten a new belt. All the screws falling out kind of annoying honestly. 1. Because you don't hear the screws fall out while riding. You don't know you've been riding with missing screws until you get back home and conduct maintenance. By that time you lost the screws because you don't know where they fell out at. 2. I paid a good amount of money for this board and not even a year in it is falling apart. Evolve says the extra vibration causes screws to come loose in the street set up so every one be careful and don't have the same problems I did. Loctite EVERYTHING you will never need to adjust.
I used a 1/8in because it was tight. It is probably metric but the 1/8 fit really snug and gave me more confidence that it was not going to strip. Plus my metric allen wrenches are cheap POS so they would have rounded off. Hope this helps, thanks for the comment and feedback. Take care and be safe.
Jacob, thanks for the comment. It might not have come out in the video bit the belt was way to tight. I had to adjust the motors. No bige though, once I got the screws loos lol.
I ordered mine 2 July. Was told on 20 or 24 July that it had shipped. Still no word on 17 August. I have reached out twice in the last week with no reply.
@@RamatorixAnyone with cold blue on their bench gets a thumbs up in my books. I use it on the usual knives and guns but also on the bare metal parts in antique drill presses I restore for my shop.
@@BlankofMaterial mine is there for knives and pew pews lol. I am trying to monetized on this channel so I cant say much but me and my buddies have a different channel.
Very good informative video. What I like to do when placing the spacer inside the wheel is to have a screwdriver through it.
1. Place the bearing inside the wheel.
2. Place the spacer inside the wheel.
3. Take a screwdriver through the bearing and the spacer then turn the wheel and the screwdriver upside down and then press down so that the bearing goes inside the wheel with the pressure of screwdriver handle.
4. Place the second bearing on the other side of the wheel and do the same again.
Extra tip: To easily get the bearings out of a wheel: Use a screwdriver and wiggle and turn around until the bearings come out.
Also remember to often clean the bearings and lubricate them with universal multi grease. I use multi grease on every moving part of my wheels and trucks.
Thanks for the comment and the pointers! Hope you will stick around on the channel. Take care
I don’t even have my own board yet and I love watching your videos. It is so refreshing to see an honest UA-camr that explains things well and cares more about helping people than anything. Keep it up 🤘🏼
Thanks so much Azazel. Let me know if you have any questions before making you first purchase.
which board u get/gonna order?
A lot of great tips when changing my wheels and maintaining my board. 😁
Josh, so glad i could help you out. Thanks for all the support you have given this channel.
Again with a Great video brother!! Just and FYI to anyone wondering, YOU CAN BUY the 40T pulley kit for the evolve from iCloud and it WILL work on your Onsra Black Carve Dual Belt. You will need to add a spacer but I am running the evolve pulley kit with no problems. They do come with belts in the pulley kit cause the stock belts are too big. I LOVE this setup. I hit 26mile range before my battery died, top speed 39MPH top speed. Granted I’m 165lbs. USE Rama’s discount code you’ll get $10 off the wheels and $10 off the pulley kit saving you $20! Thanks again for the content bro! Keep up the great work!
Tony, thanks for the awesome comment and the insight. That cool that the pulleys work on the onsra. Holly shit! 39mph you sir are crazy! Thanks also for the code shout out. I am so glad they worked for you. I should have another code coming soon that will be really cool for the viewers.
Ramatorix eSk8 reviews indeed! 39MPH!! I pee’d my pants just a little bit. I wasn’t expecting to hit that speed when I punched it in mode 3. On another note you were definitely right with the range and acceleration on the 105’s! Thanks to you I found my perfect setup! Thanks again and keep those videos coming
@@tonyt3472 no problem! I am so glad I could help. That is why I started the channel and am glad everything worked out for you. Be safe out there lol
Good to know. I was curious myself if their pulley kit could be made to work.
OnsraUSA yessir indeed you can make it work! You will need to add a spacer to the back bearing that comes on the pulley kit get the pulley and drive train to perfectly line up otherwise it will rub on the motor mount. I will still end up ordering the 40T pulley kit from Onsra though cause they are made of metal instead of the plastic. Keep up the great work Onsra! Fabi! I’m loving my black carve!
Great video. Good to know about the evolve pulleys. Cant wait to see how the cloudwheels perform with the 40t pulleys. 👍
Thanks mod mod! I am excited and hope they handel the hills well without throwing me off the board from a stop lol. Its going to have more power now so I might have to use pro or custom mode lol. I will try to get another video up by the end of the week or so.
Once again great video! I do recommend to not completely remove the belt cover for people that want to use cloud wheels on a WowGo though. Without them it's easier for dirt or gravel to get in and damage to your belts or even the motor pulleys. I used a Dremel to remove about 2-3 mm (0.11 inches) from the belt covers. You probably can also use sand paper or a really sharp knife to do this. Thanks again for all your great videos!
Thanks for the great suggestion and sharing how you modified your belt covers. Take care and be safe!
I’ve seen many comments that people rather take belt covers off altogether to stop small stones getting caught in the cover itself. Boards looks awesome with the cloud wheels.
I run my wowgo without covers and it gets about 10x the amount of rocks in the pulleys. I have snapped 2 belts in 70 miles since taking the covers off. Before that 0 belts broke in 210 mile. Thats just my experience and i am talking small rocks like in this video.
Ramatorix eSk8 reviews in that case mine are going back on my stoke lol 😂 thanks for the feedback. Besides it does look better
@@michaelflying no problem lol, glad I could help! Take care bud and be safe.
Great tip on the soldering iron to loose bolt :) Verreal RS looks like a really good board at a great price. The virus thing is putting a damper on fun.
Thanks for the feedback. It does not work all the time and sometimes takes a while but not as long as removing it after it strips lol. Ya this was not the summer to buy a bunch of boards made in China lol. At least Onsra and Evolve have stock.
Love the closing comment. Thumbs up!
I had one guy give me a thumbs down because he did not like the music i used for about 40 seconds of a 10 min video lol.
The cloud wheels looks better than the AT wheels for sure 👍🏼, I like the board closer to the ground
I do also, but I need a board I can ride on these dirt trails lol. A/T wheels will be next for the evolve.
Great video! Now I realize I only need 1 pulley bearing on the 44t
Good video Rama like your videos well detailed.
Thanks Bobby. Glad you enjoyed the video. Cant wait to see if these help on the hills around here.
Good video as always Bro. Very informative 👏
As always, thanks for the comment and support Don Juan. Look forward to more of your videos.
Sorry I’ve been kinda quiet, I’ve finally got my onsra set up with the 120 cloud wheels and got my second black carve in and just been cruising around with my cousin. Once again another fantastic and detailed video! So recently what board have you been riding for leisure riding and not video purposes? Also I’m very glad to say I was very pleased with the conversion process on the onsra black carve for the cloud wheels and Abec pulleys. Smooth as butter no hassle lol.
Its good to hear from you again. I cant agree more with putting cloudwheels on the onsra. Put pulleys and belts on, put wheels on, thats it. As for the board I like ridding the onsra the most. I hope that will change with these 40t pulleys. The evolve has been gutless up hills. There was a few time that I thought I would have to get off and walk or start pushing to help the evolve. I am with you man. I have a few more videos to knock out then I am just going to go for a few rides and not even bring the camera. Just go ride lol. Stay safe and enjoy the rides with the family.
These look fucking awesome on the GTR.
Agreed, and they feel amazing. I have cloudwheels on all my boards. I love them.
@@Ramatorix Might try them too.
@@DocToxicTF2 i have a bunch of videos on those wheels. I have them on the evolve, verreal, both onsras, and the eovan. There is a link and code in the description if you want to save a little $ take care
You rock! Thanks for the video. Didn't even know cloud wheels were an option on GTR. I can hardly wait to buy them and try them out on mine.
Have you tried using Abec 107s? When combined with larger gear they are very powerful and yet soft.
Glad it helped, I did not try the 107s but glad you had good luck with them.
What wheel setup did you choose on your remote in the settings? Since the cloud wheels and belts are larger than the evolve street setup I moved my setting from 97mm/32T to 107mm/38T since it's the closest you could get to the actual size of the cloudwheel setup.
i love my evolve board .. i have the 7 ' of road wheels , but i was looking put some street wheel on the with little to no effort. any ideas ?? not adjust motor mounts.. belt yeah... .... ride safe later ..
So I dont think you can put street wheels without adjusting the belts. If you are looking for cloud then the kit from them is nice and it was easy. For PU wheels I would buy the wheels and pulleys from evolve. Their PU wheels are actually really nice in my opinion. Hope this helps.
@@Ramatorix thanks ..
@@kevinb6636 no problem, let me know if you have more questions
back again! got 105 on mine as well. soldering iron worked great. what did you set for the wheels/gears in the remote? i'm guessing 107m 38T is about as close as you can get with it because I can't find anything else.
Thats awesome the trick worked for you as well. I think I set mine the same but it is not accurate. Thanks for keeping us to date.
Pretty sure Evolve doesn't use Loctite for the motor screws. They use it on the screws connecting the base plate to the motor plate and that's it.
Also can you post a video of you riding with the wheels on? What settings did you input in your remote so the motors didn't overheat?
How long have you had your board for?
Austin, you may be correct. I did not take the screws all the way out to confirm. Was told there was lock tight so I just treated it like there was. Thanks for your comment and the insight.
@@Ramatorix Yeah they can't use it on the motors because people who have the 2 in 1 boards (all terrain option) have to adjust their motors whenever they change from AT to street. I have had a bunch of problems with screws coming loose while riding and even some falling out (Never with the motors though). My advice to anyone who is in Street mode a lot is to go over with Loctite any screws that you don't have to adjust. I literally had the three tiny hex screws that keep the motors together fall out and break my motor. I've only had the board for 6 months. It came with a faulty AT belt, so I ride in street predominantly because I haven't gotten a new belt. All the screws falling out kind of annoying honestly. 1. Because you don't hear the screws fall out while riding. You don't know you've been riding with missing screws until you get back home and conduct maintenance. By that time you lost the screws because you don't know where they fell out at. 2. I paid a good amount of money for this board and not even a year in it is falling apart. Evolve says the extra vibration causes screws to come loose in the street set up so every one be careful and don't have the same problems I did. Loctite EVERYTHING you will never need to adjust.
@@TheRealDoodleDave super solid advise! Thanks for the info. I am going to go over the entire board before my next ride. Thanks!
Is it still the 40T pulley that comes with the 120s? Verreal uses 44T with their 120s which I would prefer
I ordered 45t pulleys from verreal. That is what I will be using with cloudwheels for my teat. Thanks for the question. Take care!
Great video real helpful! What is the allen key size for the motors?
I used a 1/8in because it was tight. It is probably metric but the 1/8 fit really snug and gave me more confidence that it was not going to strip. Plus my metric allen wrenches are cheap POS so they would have rounded off. Hope this helps, thanks for the comment and feedback. Take care and be safe.
Great tip about using soldering iron to loosen Loc tite. Did you reapply Loc tite after adjusting motors?
Thanks! I did not reapply loctite. I think there is enough on there lol. I am going to see if they start coming loos and if so will throw some on.
I wonder if blue Loctite would be a better option?
@@darylyuuki5016 yes if yours are coming loose, loctite is a great option.
7:20 put the belt on the motor first and then spin the pully on the same way you did when you took the stock equipment off
spot on with the tension. great video. would've loved finding this earlier this year when I did this on my exway for the first time
Jacob, thanks for the comment. It might not have come out in the video bit the belt was way to tight. I had to adjust the motors. No bige though, once I got the screws loos lol.
u ordered a Verreal RS?? i cant wait for mine! howver the esc is on backorder
I ordered mine 2 July. Was told on 20 or 24 July that it had shipped. Still no word on 17 August. I have reached out twice in the last week with no reply.
is that a bottle of cold blue in the back ground?
Yep, have other hobbies besides boards lol
@@RamatorixAnyone with cold blue on their bench gets a thumbs up in my books. I use it on the usual knives and guns but also on the bare metal parts in antique drill presses I restore for my shop.
@@BlankofMaterial mine is there for knives and pew pews lol. I am trying to monetized on this channel so I cant say much but me and my buddies have a different channel.
ua-cam.com/channels/nPoRFJ6xHh1dR5KOh5zGNQ.html
Hi bro,
the stock pulley is metal or plastic? thanks
The stock pulley on the evolve is plastic as well as the pulley from cloudwheels is plastic.
Hope this helps
@@Ramatorix Thanks for infor 👍🏾
@@R0BLOXNUGGET no problem. Take care
I think I will just buy a board that has cloud wheels.🤔