Hello, I have this rc car. Charging is so boring. While the socket of the battery that connects to the car is plugged in, the other charging end remains idle at the same time. Is it okay if I charge powerbank and usb to this socket at the same time (while driving the car)?
Don't see why that wouldn't work, but it won't be recommended by either manufacturer. It would probably be easier, though more costly to just run a higher capacity battery.
Thanks for sharing this very informative video about 9125, do you also have video tips on how to change or upgrade the rx reciever of this 9125? Thanks for future response 😊
You'd need two matched motors, or leave one brushed motor in there kind of as an idler - not ideal. Changing to one motor can be done, but due to the design of the car, the spur gear will be pushed to one side so the mount needs to be reinforced.
You might run into compatibility issues as that version has been discontinued for a log time. But! Have a look at the Parts Finder on our Website here: hobbiesdirect.com.au/parts/product/29947
Since these servo's seem to fail quit often, is there a better (durable) replacement servo that can be purchased ? Thanks
top video,I followed the instructions step by step and it was completely simple.
Great to hear! That's what it's for :-)
Hello, I have this rc car. Charging is so boring.
While the socket of the battery that connects to the car is plugged in, the other charging end remains idle at the same time. Is it okay if I charge powerbank and usb to this socket at the same time (while driving the car)?
Don't see why that wouldn't work, but it won't be recommended by either manufacturer. It would probably be easier, though more costly to just run a higher capacity battery.
Thanks for sharing this very informative video about 9125, do you also have video tips on how to change or upgrade the rx reciever of this 9125? Thanks for future response 😊
As the receiver in the 9125 is a receiver/esc combo unit, you'd need to change both :-) You'd also need a new, 3-wire servo.
@@HobbiesDirect Thanks for the response and tips.
hey! would it be a servo issue if when you turn it on it automatically turns to one side and won’t turn to the other even at full lock?
Very likely - sounds like the position sensor may have failed.
How can i upgrade twin motors on 9125 to brushless
You'd need two matched motors, or leave one brushed motor in there kind of as an idler - not ideal. Changing to one motor can be done, but due to the design of the car, the spur gear will be pushed to one side so the mount needs to be reinforced.
how many teeth is the 9125 servo? 21T or 25t?
Just counted at 21 :-)
@@HobbiesDirect Thanks baby. I'm retrofitting the running gear into a crawler at 4s =)
I love you Aaron
I bought a Arrma Kraton 6s v1 do you guys sell most of there spare parts.
You might run into compatibility issues as that version has been discontinued for a log time. But! Have a look at the Parts Finder on our Website here: hobbiesdirect.com.au/parts/product/29947
@@HobbiesDirect thanks mate