This is a good, actually a great view of how the front drive axle of a tandem axle semi works. I've never actually seen the guts before. Thanks for displaying this. Maybe a little oil would help, kinda squeaky lol.
"Jaw clutch" is correct for the interaxle differential lock, but I had never heard that term before; these are usually called dog clutches in automotive transmission systems.
PLEASE HELP Can someone please explain to me how locking the input shaft and helical drive gear of the front carrier assembly together prevents the inter axle differential pinions from spinning? I can see that when Grant engages the dog teeth and locks the input shaft to the helical drive gear that the differential pinions indeed do not spin...I understand that preventing differential pinions from spinning would cancel out any inter axle differential action and that the whole assembly would then rotate at the same speed but what I am failing to understand is how locking the input shaft and helical drive gear together accomplishes this... So how does locking the helical drive gear to the input shaft stop the spinning of these inter axle differential pinions? Any help is appreciated, I'm stumped and not sure I can figure this out alone.
Very good, many thanks This means that for tandem axles the power transfers first to the rear axle and in case of needs a better traction I need to engage the inter axle , so now I have two axles working together I have the forward axle is DP581P DANA SPICER differential and the rear axle is RP581DANA SPICER Differential So the power will transfer to RP581 first unless I engaged the DP581P , this right or wrong? If you please I need parts list for DP581
My truck has problem when I turn differential switch on I hear air does something but only one rear wheel spinning on passenger side. What can be the problem? What's need be checked or replaced??
For someone with general automotive knowledge, it's strange to call this a " *front* " axle. It is, of course, an axle in the _rear_ axle group, and specifically the leading axle in that group. Axle manufacturers use "front" axle to refer to the steer axle at the front of the vehicle. In their terms, this is forward of the two axles in a tandem rear axle set.
when referring to tandem axles these actually are called front axles (middle axles in tridem axle applications) and what you're referring to is generally called a steering axle - a little odd mind you, but it's how it is
Thank you I was worried my short shift was out of phase. So when I stop I look and it was in phase then the next day I looked and it was off again… so I knew it could slip … limited slip
Trying to find the answer to a question maybe you can help me, on a front wheel drive car just front wheel drive what fluid is in the transaxel differential case? i have a 2008 Chrysler Sebring that looks like its leaking transmission fluid from around the transaxel differential pan thats above the transmission pan itself , ive searched online and cant find answer.
@@joshayneanderson5117 I have work for a company that are driveline specialist and have been since 1932 and I have never ever not once heard any of the older guys that I learned from never reference this as a crown ring and pinion
Awesome demonstration Grant! Thanks for sharing this information. You have a real gift for teaching!
Thank you for this video, I've been looking for detailed explanation of Interaxle dif and couldn't find one until this. Very informative.
Great video! I feel smarter now. Even though I didn't know much about differentials, your demonstration made it much easier to understand
This is a good, actually a great view of how the front drive axle of a tandem axle semi works. I've never actually seen the guts before. Thanks for displaying this. Maybe a little oil would help, kinda squeaky lol.
"Jaw clutch" is correct for the interaxle differential lock, but I had never heard that term before; these are usually called dog clutches in automotive transmission systems.
Great video. very nice cut away diff too. well explained.
Excellent demonstration!
John Michell here. You must have built that recently. Looks awesome
Thank you , very well explained 👌👍👍
Some of the older models came optional with a lube pump. I’ve seen a DS461 without a lube pump and the parts call out shows it is optional.
Great video Grant!!!
Robert Goodin
@DTNA
Awesome video.
I can tell that differential is a female because of the pink differential housing.
PLEASE HELP
Can someone please explain to me how locking the input shaft and helical drive gear of the front carrier assembly together prevents the inter axle differential pinions from spinning? I can see that when Grant engages the dog teeth and locks the input shaft to the helical drive gear that the differential pinions indeed do not spin...I understand that preventing differential pinions from spinning would cancel out any inter axle differential action and that the whole assembly would then rotate at the same speed but what I am failing to understand is how locking the input shaft and helical drive gear together accomplishes this... So how does locking the helical drive gear to the input shaft stop the spinning of these inter axle differential pinions?
Any help is appreciated, I'm stumped and not sure I can figure this out alone.
Very good, many thanks
This means that for tandem axles the power transfers first to the rear axle and in case of needs a better traction I need to engage the inter axle , so now I have two axles working together
I have the forward axle is DP581P DANA SPICER differential and the rear axle is RP581DANA SPICER Differential
So the power will transfer to RP581 first unless I engaged the DP581P , this right or wrong?
If you please I need parts list for DP581
thank for sharing your knowledge..it helps a lot to upgrade me:-)
Great information thank you
If we removed the drive shaft between two differential truck still able to move ?
Any videos on the pump ?
Mr.grant how can I tell if the thru shaft is broke . Both rear axles are good
Is this the same setup that you find in Rockwell's.
My truck has problem when I turn differential switch on I hear air does something but only one rear wheel spinning on passenger side. What can be the problem? What's need be checked or replaced??
excellent!!!!
Very cool video
power divider, or inter axle differential.
Thanks you sir
Thanks
Very helpful
Well done very educational
Grasias nopues yabali inglis no berda aligual megusta su idiolojia
Good attempt, but the hardware is so difficult to turn that it can't be properly demonstrated except when locked, so it's just confusing.
For someone with general automotive knowledge, it's strange to call this a " *front* " axle. It is, of course, an axle in the _rear_ axle group, and specifically the leading axle in that group.
Axle manufacturers use "front" axle to refer to the steer axle at the front of the vehicle. In their terms, this is forward of the two axles in a tandem rear axle set.
when referring to tandem axles these actually are called front axles (middle axles in tridem axle applications) and what you're referring to is generally called a steering axle - a little odd mind you, but it's how it is
@@jeffreyharbin5211 none of the axle manufacturers call the leading axle in a tandem group a "front" axle.
Thank you I was worried my short shift was out of phase. So when I stop I look and it was in phase then the next day I looked and it was off again… so I knew it could slip … limited slip
Trying to find the answer to a question maybe you can help me, on a front wheel drive car just front wheel drive what fluid is in the transaxel differential case? i have a 2008 Chrysler Sebring that looks like its leaking transmission fluid from around the transaxel differential pan thats above the transmission pan itself , ive searched online and cant find answer.
I don't know what the hell country your from but that's called a pinion and a ring gear that's not a crown it's called ring and pinion
Crown and pinion not "CLOWN". Pretty sure the terms ring gear and CROWN are interchangeable.
@@joshayneanderson5117 I have work for a company that are driveline specialist and have been since 1932 and I have never ever not once heard any of the older guys that I learned from never reference this as a crown ring and pinion