[DIY] I made a trash can that can't see the trash bag

Поділитися
Вставка
  • Опубліковано 14 січ 2021
  • "Working process"
    1. Material cutting (mm)
    Main body 10 x 85 x 300 12 sheets (sugi)
    Bottom plate 12 x 150 x 340 1 sheet (plywood)
    Lid 10 x 25 x 360 2 sheets (sugi)
    10 x 25 x 170 2 sheets (sugi)
    Bag stopper
    10 x 10 x 335 2 (sugi)
    10 x 10 x 120 2 (sugi)
    * Cut the lid off (cut 45 degrees) and cut it off.
    Save the cut-off triangular scraps
    Tool HIKOKI FC7FSB slide circular saw
    amzn.to/3bH2ks5
    2. Plate peeling (joining)
    Make a four-sided board of the main body by sticking 10 x 85 x 300 boards side by side with a bond and a clamp with 4 pieces, 4 pieces, 2 pieces, and 2 pieces.
    * It is better to hold down the material with a long scrap so that it does not rise.
    Tool Kakuri Hatagane 900mm
    Https://amzn.to/3bNSl4B
    Kakuri Ratchet Bar Clamp 300mm
    Https://amzn.to/2RKec1D
    3. Assembling the lid and stopper
    ・ Connect the lid with masking tape, attach it with a bond, and fix it with a clamp.
    ・ The stopper is fixed with a bond and a nail.
    Tools Daiso Clamp & Hammer
    Kakushi nail amzn.to/2XHyGuD
    Quick-drying bond
    4. Assembly of the main body
    ・ Fix the four stripped plates with a bond and a nail while fixing them with a corner clamp.
    ・ When 4 sides are completed, attach a bond to the bottom plate, insert it, and fix it with a nail.
    ・ Fix the triangular scraps that were cut off when the clip was cut off at the four internal angles with bonds.
    ・ Similarly, attach the scraps to the lid with a bond so that you can get hooked on it.
    Tool Daiso Hammer
    Kakushi nail amzn.to/2XHyGuD
    Quick-drying bond
    5. Painting
    The cedar board used as the material was left over from the previous wall production, so it has already been painted, and this time only the unpainted parts are painted.
    Apply with a waste cloth, dry for 30 minutes, and brush with a brush.
    Paint BRIWAX Tudor Oak
    Https://amzn.to/3oMkRXX
    Tool Daiso shoe shine brush
    【Photographic Equipment】
    ◻️ Camera, lens
    SONY α7c ILCE-7C
    amzn.to/3nN3AfC
    Tamron 20mm F / 2.8 Di III OSD M1: 2 (Model F050)
    amzn.to/3nOBOQ5
    ◻️ Editing software
    Lumafusion
    ◻️ BGM
    epidemic sound
    Mirror / Ciaran Delany
  • Навчання та стиль

КОМЕНТАРІ • 14

  • @armeriagerbera656
    @armeriagerbera656 8 місяців тому

    参考にしたいと思います

  • @user-qo2fl8ic3n
    @user-qo2fl8ic3n 3 роки тому +1

    シンプルでいいですね!
    45L袋入るサイズ欲しいです 笑
    動画が海外っぽくなってきましたね!
    かっこよく仕上がってて、好きです!

    • @hanecraft
      @hanecraft  3 роки тому

      ゴミ箱なんてすぐいっぱいになるのでもってデカいやつ作りたかったんですが、余ってる材料で作れる限界の大きさがこれでした!
      海外のdiy見まくってるので自然とそっちに寄っていったのかもですね🤔

  • @diy-mom
    @diy-mom 3 роки тому +1

    わー!めっちゃおしゃれです!!( ΦωΦ )✨
    ゴミ箱の角度を変えることで、ストッパーが引っ掛かりやすくなるんですね!なるほど!💡✨
    角のところのマステ活用の手法も鮮やかで素晴らしかったです🤩
    そしてコントロールも抜群!😁

    • @hanecraft
      @hanecraft  3 роки тому +1

      よーるくさんあざます♪
      ツイートしたからには作らねば!と思って頑張って作りましたよ👍
      ゴミ箱は直角のただの箱で、三角の端材を内角四隅に付けてストッパーにしてます!
      参考にしてみてください😁

  • @user-qo8ip4nu6t
    @user-qo8ip4nu6t 3 роки тому +1

    отлично получилось

  • @user-mn3nj3ze3r
    @user-mn3nj3ze3r 3 роки тому +1

    めっちゃいい!
    素敵すぎる( *´艸`)
    これプレゼント企画とかでだしてほしいな~(笑)

    • @hanecraft
      @hanecraft  3 роки тому +1

      あざっす!え、こんなんで良ければ全然あげますよ?w

    • @user-mn3nj3ze3r
      @user-mn3nj3ze3r 3 роки тому +1

      @@hanecraft えぇ!?まじでめっちゃ欲しいです(>_

    • @hanecraft
      @hanecraft  3 роки тому +1

      @@user-mn3nj3ze3r すません!こんなん訂正します!w全力でゴミ箱作りました!🤩

    • @hanecraft
      @hanecraft  3 роки тому +1

      @@user-mn3nj3ze3r いつかプレゼント企画とかもやってみたいですね😁

    • @user-mn3nj3ze3r
      @user-mn3nj3ze3r 3 роки тому +1

      @@hanecraft プレゼント企画楽しみにしていますね( *´艸`)♡

  • @user-cf3rh1bu7l
    @user-cf3rh1bu7l 2 роки тому

    サイズ教えてください。