2001 BMW Z3 3.0 Door panel removal, window removal and slow moving power window fix.
Вставка
- Опубліковано 24 січ 2021
- I remove everything needed to get to the window regulator slide clips for cleaning and re-greasing to fix a slow to almost not moving window on a 2001 BMW Z3 3.0L
Shout out to the 50sKid!
My go to guy for everything e46.
---------------------------------------------------------------------------------------------
/ @50skid
Thanks for posting this - I found it VERY helpful and informative, and really appreciate the details and lessons learned. Super video!!
The best video I have found!
THANK YOU!!
Well Done! I have this issue with my M Roadster and this is a short cut to the real fix. Thanks for the video. I think I will clean and reinstall the old stuff with new lubricants. I'm sure it is like you said. Grease gets hard and sticky over the years and causes resistance.
Great video, used it for reference A LOT!
Awesome!
Awesome video!
Interesting video!
The way I did it was to flood it all through the window seal with silicone spray and it worked well for me lol.
Though I had to clean the windows for awhile but not that bad
DIY Hero!!
👍👏👏
Whats that back part called on the top left it clips to hold the leather jn
Are you referring to the rubber cap type thingy?
I am confused on what you did here?! Did you put new ninja star gears on or did you clean everything and put the old stuff on? I appreciate the video good work.
I just took it apart piece by piece for practice. I figured I would get it on video incase it helped someone else who wants to take apart their tranny
Oops thought this was my other video for some reason. Yeah The window was really really slow on the drivers side and the passenger side was sticking. So I remove it and put in new plastic clip thingys and re greased it. Basically the grease gets really hard after years and can not slide which is what causes the window to get stuck.
Going to try this, window went down unevenly and will not come back up. the control arm is like $400 ouch
Let me know how it goes
Yeah there is a good chance the grease just got old and hard and is now holding the window from sliding . Let me know if you have any questions
My window is stuck on the up position can I still get the job done with it up? Nevermind that, now I can't get window back on
What's the problem exactly? Did you regrease the slides after you took the window off?
@@morantb yes but I used silicone spray lubricant. At first my window was stuck all the way up past where it should be able to go. But I brought it down and then my new clips weren't fitting. And the only way for me to get them to fit was to shave the edges down a Lil. Idk how that's going to affect them after it is all put back together.
@@raymondreyes8046 let me know how it goes
@@morantb done but it's so dark outside I wasn't sure so I'll have to check in the morning 🌄
I am currently having this issue. Window is stuck all the way up and won’t budge.
Are you saying you could remove the glass and that made the mechanism move freely again??
Thanks for the video! do you want to buy my z3?
What is the year and mileage ?
What is the Liter size ?
@@morantb 2.5
@@hingjang5840 not really interested in anything les then the 3.0 but thanks for the offer.
@@morantb honestly I’m not sure which one mine is where can I check ?
Whats the deal with the audio?
Had to remove it because of licensing issues