Wow that's BadAss. Really cool so far. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.
I know you've probably thought of this but anyway: its hard to see how far the wheel sits out from the factory wheel tubs but if the wheel is almost all the way out of them you should removed them so you have more trailer space. Also off the front "slider" maybe you should just put a perpendicular bar that goes flush underneath that front box so that it wont hit the door when it open but just incase it happens to cop a hit from something. Again you've probably thought of this already and loving the progress
I'm in awe of your constant PPE use now mate, it's a change from the maverick days early on 😁 Surprised you didn't end up cutting out the inner wheel clearance step and sheeting it so you had a fully flat panel, guessing it still scrubs since there's nearly zero flex on that setup? Keep up the great work sir, got me checking out the military auctions now!
Hahah! It’s a great idea to wear PPE and I’m really trying to do it latley haha glad someone’s noticed! 😂 I’m still tossing up weather to cut them out or not! I think itlll look a lot better but it’s a fair bit more work 😅
Just new to your channel loving the diy build on your trailer its going to be a beast it already looks mint as can't wait to see the finished product 🤘
Mate haven’t even watched the video yet just saw its up and about to watch it. Been really into your videos lately and you’re up there with my favourite youtubers after only watching you for a couple of months. Love watching your videos and trying to take tips for my own channel. Love ya work mate 🤙🏽
loving this trailer build, I'm looking for the same No5 trailer so you're giving me some great ideas😍, Maybe you should just build two and sell me one😀
Love the build mate. Just a suggestion for the welding. Grind and prep all the paint from the area you are welding, it will give you a better weld and also stops you burning the paint and breathing in all the nasty old army paint 🤢😵
Love the build mate. Would it be easier to cut out the internal wheel arches to give you more room inside, save you doing the plate either side of the new mud guards? It looks like you could do away with the internal guards now the wheel base is wider with the new axle?
Wow that's BadAss. Really cool so far. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.
YESS , good way to finish the week
👌👌
best way to end the week 💯🙌🏽
@@heysexyx1657 guess you don't get out much then.
I know you've probably thought of this but anyway: its hard to see how far the wheel sits out from the factory wheel tubs but if the wheel is almost all the way out of them you should removed them so you have more trailer space. Also off the front "slider" maybe you should just put a perpendicular bar that goes flush underneath that front box so that it wont hit the door when it open but just incase it happens to cop a hit from something. Again you've probably thought of this already and loving the progress
Bloody great idea mate thanks heaps for the input, love these suggestions! 🤘
My dad used to use these trailers all the time and loves the work
They are freaking rigs!
Totally Awesome i love it. great job.
Good video as always mate
Thanks legend!
Mate this thing is looking awesome!
I love the builds U do
Thanks David!!
The ultimate camper tailer 👍
Hopefully!! Haha
looks minty..LOVE THE LONGER EPISODES as well
Oh great! Im never sure weather to leave the boring stuff in or not!
@@RoamLyfe yeah is good as
Another bloody good video for me to watch 🤙🏽
Thanks nick!
Such a cool idea. Awesome job mate
Thanks mate!!
The trailer is Looking so good
Thanks legend!!
There are some great welding tutorials on UA-cam maybe its worth watching about 26 of them.
14 comments, and its all hate from you. 😂 I'd be mad too, being named jasper
@@mckenzie4003 mmmhmmmm 14 comments huh. I better write a few more hate comments then. I mean I had to make you a liar
I'm in awe of your constant PPE use now mate, it's a change from the maverick days early on 😁
Surprised you didn't end up cutting out the inner wheel clearance step and sheeting it so you had a fully flat panel, guessing it still scrubs since there's nearly zero flex on that setup? Keep up the great work sir, got me checking out the military auctions now!
Hahah! It’s a great idea to wear PPE and I’m really trying to do it latley haha glad someone’s noticed! 😂
I’m still tossing up weather to cut them out or not! I think itlll look a lot better but it’s a fair bit more work 😅
@@RoamLyfe It seems like it'd be less work than doing infill cutouts 🤔
Though the less rust you uncover the less work that needs to be done lol
Just new to your channel loving the diy build on your trailer its going to be a beast it already looks mint as can't wait to see the finished product 🤘
Mate haven’t even watched the video yet just saw its up and about to watch it. Been really into your videos lately and you’re up there with my favourite youtubers after only watching you for a couple of months. Love watching your videos and trying to take tips for my own channel. Love ya work mate 🤙🏽
Wow thanks mate, I really appreciate that!! You’re a legend, keep it up!
Hi! Why didn't you cut out the inerwell? For more space inside? And mybe little wider outside wells to compensate smaller gap from inerwell?
I’m still tossing up weather to do it! I Probly will to be honest!!
Looks neat as can’t wait to see it all finished 👌
Thanks mate!!
Looking mint, awesome vid🤙🏾
Thank you!! 👌
Use a bicycle roller chain to limit the door travel like a tail gate on a pickup.
Had a bath in these trailers, more than once.
Another spithot video as always. love your work champ keep creating good content.
Thanks legend, thanks for the comment!!
Done a mint job legend looks so good🤤
Thanks legend!!
Mate it’s looking so minty and by the way bud your metal fab skills are definitely getting heaps better 👌🏼🍻🇦🇺
Thanks Adam! I still have a lot to learn, but when I get a proper band saw my cuts will make the welds so much easier!
@@RoamLyfe 100% mate all the proper gear makes things so much easier. Look forward to more vids bud 🤙🏼
loving this trailer build, I'm looking for the same No5 trailer so you're giving me some great ideas😍, Maybe you should just build two and sell me one😀
Ooft!! I hope you get one they are rigs!!
looks good man
Thanks legend!
what volts and wire speed you running ?
Mate stop giving me ideas! Hahah loving the build such a good idea
Haha start looking for one!! 👌
What box is that mate, and where did you get it?
It’s from ozytoolbox they are pretty cheap!
Hay mate nice build on the trailer!
Where did you get the bolt, hose clamp kits from?
I got them from eBay!
That’s mad 🤟
👌
Lucky you’ve got that box to cover them welds up the front of it 😂
But nah mate coming along nicely 👍🏽
Haha that’s what it’s for! Hide the welds!
When’s the bud of the glassy run coming
Next week!
What you doing next on the trailer
Probly sort the swing out gate or the alloy top!
Who's ln106 in the background, under that car park?
Is it a deal breaker to lift the box up an inch or so to give door clearance
It is at this point! I’m thinking if I make a frame for the box to sit on it’ll look a lot better!
@@RoamLyfe agreed and give you that clearance you need .good video
link to toolbox mate?
Only just some across your channel and videos. Please tell me you now don't weld/grind around batteries, they're only a little bit highly flammable 🔥🔥
Minttt
Minty fresh
Love the build mate. Just a suggestion for the welding. Grind and prep all the paint from the area you are welding, it will give you a better weld and also stops you burning the paint and breathing in all the nasty old army paint 🤢😵
Thanks mate! Thanks for the tip! I was being bloody lazy 😅😅
Mud flaps will finish it mint
Yeah mud flaps will make it so much better!!
💂love ❤ her work 📏📐✏🔨🔧 👍
🍻 💂
dude camper is looking WICKED
Thanks legend!
Love the build mate. Would it be easier to cut out the internal wheel arches to give you more room inside, save you doing the plate either side of the new mud guards? It looks like you could do away with the internal guards now the wheel base is wider with the new axle?
I’m still tossing up weather to do that or not! There’s a couple reasons why I havnt but nothing it set in stone! Thanks for the comment!!
Trailer gonna be raptor coated like coal?
Not sure yet! Tossing up I reckon a satin 2 pack would look good!
Loving the trailer build man. You could even use those steps you've just built to carry a gas bottle or Jerry cans if need be.
That’s a great idea! Thanks legend!
free sticker for the td?
For sure!!
Who's doesn't love a can full of metal shavings
😅😅
Fk yeah bro, that looks so dope... can't wait to see the next stage of this mint build... chur brother...
Yeww cheers mate!!
I just bought beers and smokes watching your shit..love it .can I get a free shirt...please..😁😆
box section?????? never heard it called tht b4...SHS , but good job love the vids
Haha I’ve just always called it box section!
gunna raptor coat the whole thing?
Tossing up between raptor and 2pac satin black
🤘🏻👌
👌👌
not bad !!
👌
Where is that toolbox with the side opening from?
Awesome work!
Noticed you've still got the sound dampening behind your grinder, I'd remove that if I were you. One spark and it'll be gone in a second.
No trains to spot today huh
The tralier is looking skitz
Thanks legend!!
Yu got coldvid21