Superb video, our Samsung washer would just randomly stop whenever. My vibration sensor looks slightly different and the wires are zip tied to it. Turned out that the blue wire was broken on mine, soldered it back together and it worked like a charm.
I thought I had the same problem since I had the same error code. However I replaced the vibration sensor and I’m still getting an 8E1 error code. I’m about to lose my mind!!! It’s been down for 5 months now. 🥴😵💫🤦🏻♀️ 🤯🤬😭 I replace the bearings and seal, the spider arm is in great condition I replaced the shocks, and now I’m getting the 8E1 error code. Please if anyone can help I would be so grateful! 😊 Thank you!
8E1 is supposed to be for vibration sensor or mems sensor. If you are absolutely certain the sensors aren’t bad, then I would double check all wire harness connections to the sensors and to the main circuit board behind the display. Beyond that I’m not sure.
Superb video, our Samsung washer would just randomly stop whenever. My vibration sensor looks slightly different and the wires are zip tied to it. Turned out that the blue wire was broken on mine, soldered it back together and it worked like a charm.
Hi very nice and complete video. Could you please share with us the tech sheet by PDF???
Thanks! You should be able to find the tech documentation by searching online for the specific model number.
Hi, do you know where exactly Im trying but no luck, Thank you in advance@@LongologoProductions
I would just search on Google or your preferred search engine. These manuals and service guides are almost always out there somewhere….
@@LongologoProductions 👍
Mine would give 8c code? The manual says it’s a mems sensor issue as well . But I don’t get the 8e code
What is the vibration sensor actually broken or the wire was loose?
The vibration sensor is broken and longer works. The wire was not loose.
@@LongologoProductions please tell me also did the machine spin out from the wash cycle before it errored out.
It did not.
What happened before the error occurred?
I explained that in the early part of the video. The drum just stopped right before the rinse cycle.
I thought I had the same problem since I had the same error code. However I replaced the vibration sensor and I’m still getting an 8E1 error code. I’m about to lose my mind!!! It’s been down for 5 months now. 🥴😵💫🤦🏻♀️ 🤯🤬😭 I replace the bearings and seal, the spider arm is in great condition I replaced the shocks, and now I’m getting the 8E1 error code. Please if anyone can help I would be so grateful! 😊 Thank you!
8E1 is supposed to be for vibration sensor or mems sensor. If you are absolutely certain the sensors aren’t bad, then I would double check all wire harness connections to the sensors and to the main circuit board behind the display. Beyond that I’m not sure.