Nice troubleshooting and repair. Usually it turns out to be something simple. But some times finding it is the real problem. I have an older version of Weller WS-51 soldering station. It stopped heating up after a few decades. And since it isn't in production anymore, I had to buy a new heating element from a newer versions and adapt it to the old hand unit. It was a little tricky, but it now works like new again. Thumbs Up!
Great video, except for one thing, NEVER sand a soldering tip, they are coated , as soon as you sand the crome protective coating, and the coper is exposed, they will be eaten up in just a few solder joints.
My end i scrubbed off with the sand pqper the little wire was exposed heqted up red hot can i fix it i have diff heads but theee solid from a another iron..do i need 2 make the wire curl round so obv its runnkng posititive then it runs bk into its self nmfor negative kkndov...am in lidl now they have non i dont have online banking ime bloody gutted i went through 5 of the parkside plug in ones they kept shorting out for no reason they kept tqking thrm bk as it wqs jot me..but ye sand paper been ruff and thr copper joint duz not go well..i would be over rhe moon if it can be fixed
Hello nice video I had the same problem but I fixed it and it still never worked so I bought a new tip and still doesn't work I don't if its the brass plug it screws into ha e you any recommendations on how to fix this please
Thank you for help. My stop work before months. I try these fix.. now is work..May be these model have low quality tips. After this fix its hot very fast now, than before.
@@zana3587 it would be awesome if you would let people to buy those tools from you. You could sell all the used tools that you fixed and repaired. I think many of us would buy it. It is not that we want cheap tools, it is because here in europe even if you have a blue bosch tool, noone wants to fix it. For example, new 18v cordless makita is 65 euros, so noone wants to fix my old makita or bosch. I am forced to hrow it to trash and buy new. People became lazy, they want fast money. Therefore, i would be very happy to order many tools from you. If you are interested, please contact me, here is my mail: irinejovlen@mail.com
Hi Dahen big thanks! Do not do much electrical work and bought this on impulse. Never had much joy with it. Just never warmed up enough and thought it was a gimmick. Was looking for a strip down post to see if I could use parts for another project. So glad I found your channel!! It was a lovely sound when I got my continuity bleep!!! It is now working as it should. Got a blister to prove it!! Doing my research I found a great site for all things Parkside ( tips included) at lionshome.co.uk. Many thanks bud.
Nice troubleshooting and repair. Usually it turns out to be something simple. But some times finding it is the real problem. I have an older version of Weller WS-51 soldering station. It stopped heating up after a few decades. And since it isn't in production anymore, I had to buy a new heating element from a newer versions and adapt it to the old hand unit. It was a little tricky, but it now works like new again. Thumbs Up!
thank you sir
Great video, except for one thing, NEVER sand a soldering tip, they are coated , as soon as you sand the crome protective coating, and the coper is exposed, they will be eaten up in just a few solder joints.
thank you sir you are right but there is no way to take off
@AltairAlphones Coated by what? Can you explain what to do then?
Life saving man. I managed to repair mine like this. Thanks a lot. 🙂👌
My end i scrubbed off with the sand pqper the little wire was exposed heqted up red hot can i fix it i have diff heads but theee solid from a another iron..do i need 2 make the wire curl round so obv its runnkng posititive then it runs bk into its self nmfor negative kkndov...am in lidl now they have non i dont have online banking ime bloody gutted i went through 5 of the parkside plug in ones they kept shorting out for no reason they kept tqking thrm bk as it wqs jot me..but ye sand paper been ruff and thr copper joint duz not go well..i would be over rhe moon if it can be fixed
Çok teşekkür ederim dostum sayende FERM marka ürünü tamir ettim aynı icergie sahip.👍
umarım işinize yarar
Wath i have to do if its full charger and dont put on
Very nice job and I am so glad when I watch someone he knows what he want and what he have to do.
Thank you sir
@@zana3587 Sir I saw in some of your replies written in Arabic so would I ask from where you know arabic if you don't mind.
Very good ,I don't know what i have to say only when i watch you fix things i feel i am in paradise ,because i am fall in love with repairing things.
Thank you, sir, I hope it will be useful to you
@@zana3587 In my country they says cemetery don't refuse any dead man and i am like cemetary with learning things even if I know this information.
Толково!!! КАк всегда-отличная работа!!!
Спасибо, сэр
Is the heating point a PTV? I am looking for a way to use it for a much lower temperature, around 100d C, to melt wax. Any tips or ideas?
Never sand down the iron tip, it removes the protective coating, and solder will not stick to it and the tip will be eaten away during soldering.
thank you sir
true based on my experience 100%
Hi, can you make a video where you make replacement soldering tips, they wear off quite quickly and are pretty hard to find. Thanks!
sorry sir
@@zana3587 I took apart an old one but I didn't find a way to refurbish them, are you still using yours?
How to repair a soldering iron using a soldering iron😂😂
Great work, anyway!!!!
thank you sir
Is there anything this guy can't fix? Great job.
thank you sir
Hello nice video I had the same problem but I fixed it and it still never worked so I bought a new tip and still doesn't work I don't if its the brass plug it screws into ha e you any recommendations on how to fix this please
no idea sorry sir
Insane tutorial 😂😂, nice work
Thank you for help. My stop work before months. I try these fix.. now is work..May be these model have low quality tips. After this fix its hot very fast now, than before.
good work sir
@@zana3587 Thank you for your idea :)
Where can I buy replacement tips for this soldering iron?
no idea sir
Aliexpress
Can i use 2.5ohm 2w resistor instead of this heating wire?
sorry sir no idea
انت مبدع استمر اخي الكريم
اني من متابعيك دائما وبااستمرار اخوك من العراق
اشكرك اخى العزيز
Genius! Thank you
thank you sir
Youre the GOAT
Where can I get the tip for it?
maybe in ebay
@@zana3587 No they don't have any
Sorry sir
Very nice work.
thank you sir
If you open something for the first time, how do you always know what is wrong with the machine ?
Step by step until I get to the problem
@@zana3587 it would be awesome if you would let people to buy those tools from you. You could sell all the used tools that you fixed and repaired. I think many of us would buy it. It is not that we want cheap tools, it is because here in europe even if you have a blue bosch tool, noone wants to fix it. For example, new 18v cordless makita is 65 euros, so noone wants to fix my old makita or bosch. I am forced to hrow it to trash and buy new. People became lazy, they want fast money. Therefore, i would be very happy to order many tools from you. If you are interested, please contact me, here is my mail: irinejovlen@mail.com
أحسنت أستاذ👍👍
اشكرك استاذ
In this way you shorten the resistance wire. Temperature will be higher after repair.
أخي الكريم عندي نفس هاي الكاويه بس مسمار الأمامي نفقد كيف ارهم مسمار غيره ياريت تنوهني
ربما يمكن ايجاده فى اى بى
Nice job 👌🏻
Thank you sir
Well done, i have the same product and it doesn't work,i hope watching ur video to solve my problem.Thx
thank you sir i hope it's helpful for you
Are you an engineer or self-taught?
not engineer
You won again !
Thank you good man . How are you ?
@@zana3587 thank you I'm well and hiding like everyone 😄
Nice work bro
thank you bro
4:15 this looks like cold solder joint
تصليح ممتاز لسه هذا الكاوي لم يصل عندنا
اشكرك اخى بس عندكم اشياء افضل من الكاوية
@@zana3587 عندنا glue gun يعمل ببطارية ليثيوم
نعم لقد رايت هذه فى السوق انه جيد
Wouldnt a proper fix be temperature control so the iron doesnt overheat everything it touches
it doesn't overheat
👍👍👍👍👍
thank you sir
If my tip will fail, I will replace it with a JBC tip that I have which is also very small and 100 times more quality haha.
نفسى فى منتجات الشركه دى
هواية جيدة
Garbage. I bought it in lidl for 10.99 euros, it lasts literally one and a half days. Don't buy.
Hi Dahen big thanks! Do not do much electrical work and bought this on impulse. Never had much joy with it. Just never warmed up enough and thought it was a gimmick. Was looking for a strip down post to see if I could use parts for another project. So glad I found your channel!! It was a lovely sound when I got my continuity bleep!!! It is now working as it should. Got a blister to prove it!! Doing my research I found a great site for all things Parkside ( tips included) at lionshome.co.uk. Many thanks bud.