This is one of the best DIY videos I've ever seen unlike other DIY videos you actually talked about what you were doing make it easier to follow and then it just play dubstep music do all students spend half the video asking us to subscribe very well made video
this is a great project, I would add: 1. So that the application has an animation of the movement of the robo-hand. 2. Make several 3D models of the tip, for example, to mount the camera, so that it would look like a movie) 3. Pour metal into the legs of the support so that the structure is stable
What i think would be reall cool is when you build or design a camera robot for budget filming. Product filming with a robot like that would be super impressing for cinematic shots
Hi! I am buliding it right now, but I have a problem to control it by Windows Aplikation. I have 360* servo (not 180), and after I change "base servo" position, it spining around whole time. Can You tell me how can I change type of servo in aplication?
where did you get started ? what are skills and software you use ? and how long did it take to learn all this? your video made me curious to try it out myself. Pls answer if you see this comment. thank you for the informative content.
Hi I have been studying robotics for some time now and I have learn the important things but this is a list on things to learn Ardiuno C++(coding language) 3D modeling mainly something like fusion 360 I hope this helped you
@ wonderful ! thank so much for taking time to commenting with this info. From your list and this video, I have been really feeling about starting with 3D modeling. Imma start there and also build on the c++ and ardiuno side.
I build the robot, but have problems with the third servo, it is not moving. i suspect the output of the arduino is wrong in the software. Tried 2 arduino's but both have the same problem. And the second servo has to be a full metal one. A servo with plastic gears can not handle the weight of the arm
Hola!, no vendo las piezas impresas pero sí los componentes, tornillos y diseño 3D. Puede adquirirlo aquí😊: fabricreator.com/products/robotic-arm-kit-fabri-creator
The jittering issue may be because arsuinos are terrible at supplying power, and the draw from the servos may effect the input to the servos. This Is especially a problem when the servos are under load and even more so when a larger servo is under load. Servos are also not suuuper great for this but because they are do easy to use and Cheap to buy they make sense for a cheap DIY robot
Have a robot at home trying to figure out how to program it from scratch. I am using an untrasonic to trigger the movement sequence. How do you program the base servo to rotate a certain angle at a certain speed then return home or back to zero awaiting to be triggered again?
The circuit connection shown in 6:10 is wrong. the servo pins must always connected to PWM pins .If not they will not work. The PWM pins in Arduino are 3,5,6,9,10,11. Thank you
I wish I had gone with a simple and efficient design like this with my current arm. Its been printing for 2 weeks and ended up being too heavy for the 5 MG996R motors that I used lol.
Hi, Thank you for uploading such a detailed video. I am still a beginner. I understood the mechanical and Electronics design of Arm, Arduino programming as well. I am just not sure about the software. Do I need to design a software too to control the arm??
Great development, thank you very much for that. I'm looking for a way to program a robot arm to perform tactile movements. I want to use a robot arm to write or draw something on a moving free-form surface.
Thank you for the great video. But may I ask you all that, Can this project be scaled up without changing the software and arduino codes? I mean 4 or 5 times bigger one..
@Fabri_Creator 1-s’il vous plaît, Quel logiciel avez-vous utilisé pour réaliser le dessin en 3D ? 2- on doit fabriquer laTORNILLO + ARANDELA M3 12 MM où bien l’acheter ?
holy cow thats awesome!! you are a saint for opensourcing all your hard work! 🙇 do you have a part list, so we know exactly what and how much to buy? is it also possible to control the arm with a keyboard, or even a joystick? you should really do a kickstarter as well!! :D
Awesome!!!😍 It's a remarkable piece of tech. Keep it up ❤. But I have a Mac Book and will this software work on it to control this robotic arm? Love for India ❤.
Tu as utilisé quel IA pour la traduction ? Pourquoi ne pas avoir fait une deuxième piste audio au lieu de faire une deuxième vidéo ? Et beau travail au faite !
Hi, I noticed in the video that multiple power and ground wires are combined into a single wire. Could you explain what method or connectors you used to combine these wires together? Thank you!
I used wires that come glued together and some header pins. However, what I recommend is to use tinned wires and make the connections as in the video. I put the black wires together, the red ones together and the signal wires separately.
I wouldn't have thought very much. I'm surprised it's able to hold up it's own weight so well tbh, given it's only using small servos. Great project though 👍
The exploded view assembling chain was mind blowing. My mind exploded and put itself back together in the same manner.
My mind blown away man!
You are all in 1. fullstack robotic engineer, fullstack electrical engineer and fullstack software engineer.
My god this is beautifully edited!! Such an awesome project!! Keep up the good work! ❤
I agree with you
you mean fake?
@@megilae no its not fake at all!
Beautifuly edited video !!! Best tutorials on robotic arms. Thank you for sharing. I am getting busy to do all your projects 😂
This is one of the best DIY videos I've ever seen unlike other DIY videos you actually talked about what you were doing make it easier to follow and then it just play dubstep music do all students spend half the video asking us to subscribe very well made video
Your channel is a valuable asset to the community.
This is the best robotic arm I've seen so far. Awesome work!
Really simplified a complex concept for anyone to understand and feel confident to do as a project.
That introduction was beautiful !!!! Very nice project
Absolutely brilliant.
Super quality, excellent work. Subscribed
Excellent project, I hope to be as good as editing as you are someday
Thank you!
this is a great project, I would add:
1. So that the application has an animation of the movement of the robo-hand.
2. Make several 3D models of the tip, for example, to mount the camera, so that it would look like a movie)
3. Pour metal into the legs of the support so that the structure is stable
Thanks for your recommendations!🙏
@@FABRIcreator thank you for your creation, I’m waiting for a new video 😉
What i think would be reall cool is when you build or design a camera robot for budget filming. Product filming with a robot like that would be super impressing for cinematic shots
Lovely video with such a nice explanation!!
Great work bro❤
Beautifull a simple explanation and Helpfull
Excelente!!! Muy buen trabajo!!!
fabri, acabo de comprar el brazo robótico, no veo la hora de armarlo. ¿Podrías darme la lista de tornillos necesarios para armarlo? Por favor
Which type of servo motor did you use in want to see if the motor is in my country before o start the model
6:05 how to make this ?
PRINT FULL ROBOTS!!! 😍
How can I do it but i want to control it by my hand and camera
Hi!
I am buliding it right now, but I have a problem to control it by Windows Aplikation. I have 360* servo (not 180), and after I change "base servo" position, it spining around whole time. Can You tell me how can I change type of servo in aplication?
Try to see if there is a problem with the code
Great video man!! Very amazing project. Btw what software do you use to create the assembly animation?
What is the current length of the robotic arm in cm?
where did you get started ? what are skills and software you use ? and how long did it take to learn all this? your video made me curious to try it out myself. Pls answer if you see this comment. thank you for the informative content.
Hi I have been studying robotics for some time now and I have learn the important things but this is a list on things to learn
Ardiuno
C++(coding language)
3D modeling mainly something like fusion 360
I hope this helped you
@ wonderful ! thank so much for taking time to commenting with this info. From your list and this video, I have been really feeling about starting with 3D modeling. Imma start there and also build on the c++ and ardiuno side.
I build the robot, but have problems with the third servo, it is not moving. i suspect the output of the arduino is wrong in the software. Tried 2 arduino's but both have the same problem. And the second servo has to be a full metal one. A servo with plastic gears can not handle the weight of the arm
How long does it take to print the armrobot. ?
hola estoy interesado en realizar el proyecto, pero quisiera saber si tu vendes impresos las piezas y los elementos electronicos
Hola!, no vendo las piezas impresas pero sí los componentes, tornillos y diseño 3D.
Puede adquirirlo aquí😊: fabricreator.com/products/robotic-arm-kit-fabri-creator
amazing work. can you make a video on more strengthened robotic arm .ie, it can be used for household works
Jika daya mati, apakah ini harus diprogram ulang?
This definitely on to save. 👍✌🖖🥃(Good Job,Peace,Live Long, and have a Drink(responsively and if your old enough)
congrats, this is great!!
excelent project !!! super
Simple and elegant, love it! How did you animate the exploded view at the beginning of the video?
Thank you very much!
I did it with Fusion360
Hi @FABRIcreator,
How will you eliminate jittering for robotic arm. is it not smooth as expected.... any future plans?
The jittering issue may be because arsuinos are terrible at supplying power, and the draw from the servos may effect the input to the servos. This Is especially a problem when the servos are under load and even more so when a larger servo is under load.
Servos are also not suuuper great for this but because they are do easy to use and Cheap to buy they make sense for a cheap DIY robot
what a grate vid very well put together
thanks for all your hard work and packaging the instructions so well
what a star
God bless you! Thanks for sharing!
were the list of material and equipaments to the robotic arm ?
hello , do you have a bill of material to buy to make this great robotic arm ?
what 3d print brand and model u use?
Have a robot at home trying to figure out how to program it from scratch. I am using an untrasonic to trigger the movement sequence. How do you program the base servo to rotate a certain angle at a certain speed then return home or back to zero awaiting to be triggered again?
The circuit connection shown in 6:10 is wrong. the servo pins must always connected to PWM pins .If not they will not work. The PWM pins in Arduino are 3,5,6,9,10,11.
Thank you
@fabricreator are you still shipping kits?
Why dont u use rasberry py or micropython
Have you considered making a master for the slave arm?
can i control arm with voice command
Hey, do you have stl files for the servo attachments? I own some servos, but they are missing the attachments.
muy bueno! enhorabuena por el trabajo
Hi! The kit doesn't deliver to my country, but I would love to build this arm. I was wondering if you could tell me what screws I need? Thank you
how much weight can it pick up?
superb!
For what do I need a USB transformer?
I saw it in the components list on cults
What is the maximum load it can lift? Or even but maximum torque. Thank you.
Don't throw away your forklift 🤣
I wish I had gone with a simple and efficient design like this with my current arm. Its been printing for 2 weeks and ended up being too heavy for the 5 MG996R motors that I used lol.
Can you Please provide a Android version For the app and please provide a code so that we can make it vireless using an esp 32 microcontroller
How did you do the 3D animation on the start of the video making the robot ?
Tambien, esa parte me impresiona más.
In Fusion 360!😊
@@FABRIcreator YOU CAN DO ANIMATIONS IN FUSION 360 ? 😱
Fusion 360
any body knows why i cant acces the design of arm?
Its really cool❤
Hey, how long do you need for shipping your products? I live in Berlin.
efforts 💯💯
The Fusion360 files also comes with the STEP?
The Fusion360 files are the entire project, including the animation I made.
If you want, you can export the parts in step format from Fusion 360 😊
Hi,
Thank you for uploading such a detailed video. I am still a beginner. I understood the mechanical and Electronics design of Arm, Arduino programming as well. I am just not sure about the software. Do I need to design a software too to control the arm??
Great development, thank you very much for that. I'm looking for a way to program a robot arm to perform tactile movements. I want to use a robot arm to write or draw something on a moving free-form surface.
Very GOOD😻😻
Very interesting. Well done.
The servos don't make any movement they only make noise. Im using 5V 3A adapter
Thank you for the great video. But may I ask you all that, Can this project be scaled up without changing the software and arduino codes? I mean 4 or 5 times bigger one..
How to make the connectors for all the servo motors and ardurino
which language you have used
Really nice project. Can I have a list of all electronic parts used in the video and link to buy it ? Thanks
@Fabri_Creator
1-s’il vous plaît, Quel logiciel avez-vous utilisé pour réaliser le dessin en 3D ?
2- on doit fabriquer laTORNILLO + ARANDELA M3 12 MM où bien l’acheter ?
Hi, how much max weight can the robot arm hold? Could a camera be mounted to the end of the arm? Thanks :)
Hey! Servos are pretty strong to maybe… like a GoPro or a mini action camera
Hii bro i am trying to buy this model in the website but there is a payment error, trying n times a day!!! if there is any other way??
software for 3d printing,laser engrave,cnc & soldering please...we will love a video about those 4 softwares please
Très bon suggestion 🤝🏾
Fusion 360
Can you please integrate it eith computer vision and make it pick things using it and drop on desired place
I have never worked with Computer Vision but it is a good idea, I will investigate more.
Really appreciate that it is all given out, however I would suggest including the BOM for fittings, servos, etc.
Some guys will never be content with anything.
This is Amazing! thanks so much, does the control application work on Mac?
Hola Fabri, es igual que tu anterior brazo robot o este tiene mejoras ?
Es el mismo video pero en Inglés 😊
holy cow thats awesome!! you are a saint for opensourcing all your hard work! 🙇
do you have a part list, so we know exactly what and how much to buy?
is it also possible to control the arm with a keyboard, or even a joystick?
you should really do a kickstarter as well!! :D
Its not open source when he is selling the 3d files
Awesome!!!😍 It's a remarkable piece of tech. Keep it up ❤.
But I have a Mac Book and will this software work on it to control this robotic arm?
Love for India ❤.
Thank you very much!!
The app is not available for Mac but I will try to make another app for it.
@@FABRIcreator Thank you ❤️. If you make the app for Mac as well, I will definitely create this project for my school science exhibition.
@@FABRIcreator You can modify this robotic arm by adding a servo motor to rotate the claw mechanism, making it easier to pick up objects.
Espectacular lo que has creado!!! Cuanto peso puede cargar el brazo?
Does anyone know if I can use 360° servo motors? In Cults3D material list there are 3 x 1Kohm resistors, but I didn't see them in the video...
hi , I would like to test my printer using your MODEL but I can not download since the website seem can not be access, Please help
What is the total weight of the 3d printed parts??
Atleast an estimate would be helpful
bro without supports 605,56 gr with %100 infill and with tree supports its 637,86 gr
Tu as utilisé quel IA pour la traduction ? Pourquoi ne pas avoir fait une deuxième piste audio au lieu de faire une deuxième vidéo ? Et beau travail au faite !
Est-ce que ça ressemble à l’IA ?🫨
@@FABRIcreatorpagaste para que te lo traduzcan Xd ?
Hi, I noticed in the video that multiple power and ground wires are combined into a single wire. Could you explain what method or connectors you used to combine these wires together? Thank you!
I used wires that come glued together and some header pins.
However, what I recommend is to use tinned wires and make the connections as in the video. I put the black wires together, the red ones together and the signal wires separately.
Where is the circuit to send it to be made or bought?
bro pls, i need a 4dof version of this pls.
Can i get circuit diagram, components lists and the screw list you used
great job
hi, what type of wire do u used to solder to dc jack socket? btw love your project
Will there be a software part of it ?
Amazing work!
Can you tell us how much the robot is able to hold?
I wouldn't have thought very much. I'm surprised it's able to hold up it's own weight so well tbh, given it's only using small servos. Great project though 👍
Buenas tardes un acaso no tiene una guía con los materiales como los tipos servos, los tipos de tornillos a usar en cada parte.
Im printing it now, does anyone have a parts list. Im not sure which sevos to use as their specification vary.
Brother What an amazing video, Could I ask you how to change the values from the app max 180 to 360 or more? Thank you!
Can u provide some more information about the software?
is it possible to use esp32 ? so can control it from phone?