I sometimes change to the lowest possible position on handle bars. It is more aero on headwind and changing position every once in a while helps with tingling hands.
Another awesome video, folks! 🖖😄🇺🇸 Find an upper body position that is comfortable for you. Something you can ride all day in. Not too far forward; I use the old "tops of the bars hide the front hub from view when you're on the hoods" method. Also be mindful of your fore/aft saddle position. Plumb bob from your knee joint lined up to the pedal axle.
@@gcn I appreciate that you emphasize the fundamentals, such as understanding gearing and bike fit, without emphasizing the latest gear or gimmicks to overcome lack of basic skills. I also appreciate that your presenters clearly love cycling without being egotistical about it.
I would say, from my experience of riding road-bikes for the last 38 years, that an important skill is to find a sweets-spot between grinding too difficult a gear and spinning too easy a gear.@@gcn
Riding 20 years on my TREK Disovery, never a set up, however watching your video and employing your suggestions changed my riding and made my riding far less painful, more comfortable, and powerful.👍
Best thing I ever did was shortening and increasing the angle of my stem, lowering my saddle and buying a frame a size smaller. No pain now for a year or so.
Manufacturers recommended size just never felt right so I did what my body felt was right. I had a bike fit many years ago but the changes were minimal from my own set up!
I struggled on bikes that were too large for years - never felt truly comfortable. When I got my Giant TCX the guy in the shop said to go down a size from my normal size. Got a bike fit thrown in, sorted my back out with a foam roller and have never looked back since (except to see what's coming up before a manoeuvre). I've measured my sit bones and my saddle's the right size but probably like most people I would like it a bit comfier!
While this is quite the Pandora’s Box, tweaking is the way to go. No abstract formula of angle degrees and millimeters can substitute for listening to your own body, while on your own bike.
Super video again Manon and Conor! Best tip (which Manon partly covered), is have your sit bones measured and then ensure that any saddle has at least enough flat at that width to support the sit bone width and doesn't fall off or away so that the sit bones are not supported and you wind up taking it in the pubic arch. OUCH!
As a new rider this was so helpful. I bought a bike 2 years ago and rarely rode it due to discomfort, for the longest time I thought I bought the wrong bike / size. After following the tips, the ride feels a lot better and makes me want to go out and cycle more. One thing I did also was reverse my stem to bring the handle bar higher.
I always had problems with pain in the lower back und upper legs - until i slammed my bars, moved my saddle a little bit higher and way more forward. So a more "aggressive" position gave me more power and comfy at the same time, awesome
I have the same problem. It's probably because when you're in aggressive or aero position, your hand also contributes in distributing your body weight.
My moment of realization and what changed to “never having pains again” was GETTING RID OF THE BELLY and stretching. You get more flexible, comfortable, and can ride a heck of a lot faster (of course you have to be in the ballpark of good bike fit)
Good advice on warming up, never even thought about that. I live at the bottom of two hills, although not long, they are both about 14-16%😭, and are within 4 metres of my drive. I think that at the age of 73, I'm going to spend 5 mins on my, permanent, turbo to do a pre ride warm up. Great advice, thanks.👍
One thing I learned the hard way was that after some time off due to injury I was uncomfortable when I started back. So I adjusted my saddle and bars. Once I got some time in I was uncomfortable again due to my whacko adjustments. Thankfully I marked everything so I ended up putting it all back, ......
Bike fits can always change after an injury, It's not a bad idea to make the bike a little more relaxed. You might find that you then find it easier getting back on your bike 🙌
While pedaling, I angle 📐 my feet slightly forwards, with the toes angled towards the ground, while having rigid feet, I found that this gives me more power translations in every move, and can pedal for hours to hours without wasting too much energy on my feet. Just did 75 km in 3-3.5 hours.
Could we have a longer video dedicated to warm up & warm down both for outdoor rides & indoor sessions. eg how long at what typical percentage of FTP? are static stretches good? etc. Appreciate this may be an individual thing but some general tips would be useful.
I can't answer all the questions in regards to cycling, but as for stretching: Use dynamic stretches for a warm-up, and static stretches for a cool-down.
I am used to cycling mtb. Bought my first road bike a couple of years ago. I almost regretted it. After the first ride I thought, "What kind of sadistic freak would make and sell a torture device like this?" 😂 But after 2 years of experimenting with narrower handlebars and various things, as well as getting used to riding it, the road bike has become my favorite bike.
Thanks. On the bike our muscles work a lot within a reduced range of mobility. This is shortening legs and core joints and fascies. I'm missing the recommendation, that bikers should work on their flexibility and core strength before and after every ride. 😉
I had a bike fit in my 60’s. The bike fitter gave a great piece of advice. As you get older you do lose some flexibility and tolerance to spending extended periods in uncomfortable positions. So adjust your posture on the bike to suit your body rather than attempt to copy those positions used by pro-peloton riders.
I just knew i had to ride the way it’s described here because it was more comfortable that way than every-other ways i have experimented with despite using the old gear system
Don’t be afraid to experiment with different stem lengths and handlebars for variances in rise, flare, etc. They’re not terribly expensive to swap out and could easily be the solution to a more dialed fit.
@@dvdp4513 Yeah, each body is different and each individual prefers a particular "feel". It's a shame many popular stems and handlebars are overpriced since it deters people from personalizing their bikes.
The lads: tutoring from the UK with a Pinarello and a SelleItalia saddle Me: watching them from Italy and absolutely on 7th heaven at their fantastic perfect cadence (in English too - me foreign learner) 😅❤
Nice video and presentation. It is easier said than done. If we relax our arms pushing down we’d be sinking towards earth with our chest hitting the stem.
The biggest help for comfort for me was changing the saddle angle. It was level from nose to back but that caused pain, i didnt even know the saddle angle could be changed until a friend told me and your videos showed me how and why. My bike still needs a bit more adjustments but watching such videos is helping me get it right
No worries Karl! Thanks for watching & commenting 🙌 - Lower back pain could be a real selection of things. Saddle hight, seat angle or even bar setup, maybe a bike fit will help sort your issues? We've got some great videos that may be able to help 👉 ua-cam.com/video/c0gw_UG1zZM/v-deo.html
Remember, sometimes your handlebars may actually be too high and too close, giving you neck, shoulder, hand pain, etc. as well as posterior rotating your pelvis. It took me 2 years to figure this out.
@@jamesambrosio2031 Hard to say, but first check your cleats are in good condition and not too far forward. Then check your saddle tilt (most saddles are between 0-3 degrees nose down) and saddle height (both legs should be able to bend normally. Then I would check that your handlebar is not too wide or that it's angle is not off (you can find videos on this by Neill Stanbury). Move your stem up and down and, if possible, try to reduce reach or increase it by switching stems. This is a rough troubleshoot.
Another thing worth looking at is handlebar width. Especially with gravel bikes right out of the box, regardless of frame size, the handlebars tend to be 2-4 cm too wide for most people, and the slightly splayed-out stance, while barely noticeable at first, can wreak havoc on your neck, wrists, and shoulders on very long rides.
It does amuse me, that after years of GCN telling us to slam our stems and not have a chimney (thus removing the possibility to raise your bars again after), you are now telling us not to do that 😄
It seems the further removed they become from their racing days the more the info becomes more suitable for the average rider and not the small number of viewers with grand tour potential.
It’s across the board I think. They’ve done the same with weight loss advice, bike cleaning , wrapping handlebar tape etc I daresay it’s a case of re inventing the wheel to justify continually re hashing the same subjects.
I was just thinking when Conor was talking about handlebar height that there's not that much wrong with having a 'chimney' really, the aerodynamic penalty is negligible, it's just a bit of an aesthetic thing. I'm very resistant to making irreversible changes to things I can't replace cheaply so would think very long & hard before cutting a fork column - especially a carbon one!
Nothing wrong with this. We are learning and re-learning about cycling all the time. Science is about testing, observing, analysing and reporting... and then repeating that process again and again. I'm glad they are revisiting some of these things. I don't see that as a negative.
that "one" perfect position may never be found, for we ourselves change & age every day. the bike won't, so comfort-awareness is lifelong. especially if one watches YT-videos :-) buona fortuna!
Thanks so much for these tips! I am totally new to cycling on a gravel bike and I have so far found a comfortable position BUT: after a few kilometers I get a stabbing pain in the front of my left hip. I tried setting the saddle lower, higher and I tried different angles for the saddle nose. But nothing helped so far. I then have to stand up and straighten myself out, then I'm fine again. Is the handlebar perhaps too low?
Important thing is having the handlebars just high enough to be able to maintain a bent elbow or a tuck position. Some riders slam their stem but they can't maintain a "tuck" position very long. You become slower if your arms are always straight. WIth that, I do agree having it too high will cause your shoulders t o shrug and causeback pain.
Modern bikes are much more likely to have super slammed stems and stacks too low. You see it on the road all the time. Like the pinarello the lady is riding. The steerer tube was obviously chopped off, cuz we’ve been taught that’s how it should look. When in reality, except elite athletes almost all of of us would be more comfortable and balances on the bike with higher stacks.
For some people, yes. It doesn't seem to make any sense but when my handlebars were dropped following a bike fit, I actually had less pressure on my hands and my shoulder issues disappeared (I'm no longer shrugging my shoulders to lower my torso). I was told this is rather common in very flexible people like myself.
@@TurnLeftNow I cannot agree more. The best advice they could have given in this video would be to raise the stem. We are told to go aerodynamic, with slammed stem and all, to be quick and fast like pros, but most of us are really just amateurs with no needs to. Especially when it sacrifices comfort.
You guys make a great team Keep up the good work looking forward to more posts from y'all Ok put the bar bag back on the motorcycle where it belongs and we'll forget all about that little fiasco k? Do keepemcoming won't you
More content on the way soon don't you worry! Turn on your notifications and you'll never miss a video 🔔 You can't take the bar bag off Conor... it's like taking candy from a baby
All good points, I try to use these as much as possible. My main problem is a pain in the right wrist when braking and changing gears, any tips to grip the hoods correctly to aleviate this?
Just remember that your body controles all of the muscles automaticaly, without your conscious effort. How tense or relaxed you are is simply a product of how your bike is set up.
Van der Poel continues to drive in the same way, according to De Wolf. “I didn't see Mathieu grab his handlebar from underneath twice in the Tour. He always drives with his hands on the steering wheel. Until he reaches fifteenth place and then he sees a small gap. Then it's: go, just left or right and then he's back in fourth position. That is talent, surplus and having good legs.”
Thanks for that information Guys, I'm a new rider on a mountain bike and my hands get numb and I get a tingling sensation after about kilometers and this happens every time I ride, what should I do?
What confuses me that I can hardly reach the braking levers from the drops and I have used the positioning screw of my Rival to bring the brake lever as close to the handelbar as possible and I have no small hands, more average to slightly large. Position of the hoods is neutral as is the handlebar (Giant handelbar: Reach: 72 mm / Drop: 125 mm) is also quite normal to comfort from the numbers.
Selle Italia Novus Boost Evo TM Superflow. 145 mm wide saddles are common but most people tend to have their thighs rubbing on the wings and move forward on the saddle to avoid it. The Selle Italia SLR and Flite in 130-135 mm tend to suit more people.
I have issues with numb palms on longer rides, 4-5 hrs are long for me, and rarely numb seats, no solution worked so far. My saddle is not too high for sure. Would welcome suggestions 🙏
If nothing else is bothering you, try a double layer of handlebar tape. I have gone as far as using thick cotton cloth instead of bike specific handlebar tape. Made a massive improvement. Thicker gloves are an option too, at least during cold months.
Warming up is also healthy. I know riders that are crazy for average numbers of speed... they go crazy from the cold bodies!! They just want high average speed, insanity!
I'm new to graveling which is as close to a road bike I'm gonna get coming from a mtb oh dear I can't break properly no you don't use one finger ,can't turn properly I'm going to far out ,I feel like a nutter loads to learn
Drop your top tip for getting more comfortable on the bike below? 👇
Riding on windless days.
I sometimes change to the lowest possible position on handle bars. It is more aero on headwind and changing position every once in a while helps with tingling hands.
Another awesome video, folks! 🖖😄🇺🇸
Find an upper body position that is comfortable for you. Something you can ride all day in. Not too far forward; I use the old "tops of the bars hide the front hub from view when you're on the hoods" method. Also be mindful of your fore/aft saddle position. Plumb bob from your knee joint lined up to the pedal axle.
Acquire cycling shorts
Ride a mountain bike 🤣
I really appreciate these beginner cyclists videos. The fundamentals are so important!
Great to hear you are enjoying our beginner content. 🙌 What do you think is the most important skills to learn as a new cyclist? 👀
@@gcn I appreciate that you emphasize the fundamentals, such as understanding gearing and bike fit, without emphasizing the latest gear or gimmicks to overcome lack of basic skills. I also appreciate that your presenters clearly love cycling without being egotistical about it.
I would say, from my experience of riding road-bikes for the last 38 years, that an important skill is to find a sweets-spot between grinding too difficult a gear and spinning too easy a gear.@@gcn
I could watch this couple explain anything. Delightful!
Riding 20 years on my TREK Disovery, never a set up, however watching your video and employing your suggestions changed my riding and made my riding far less painful, more comfortable, and powerful.👍
Best thing I ever did was shortening and increasing the angle of my stem, lowering my saddle and buying a frame a size smaller. No pain now for a year or so.
love to hear it! Did you get a bike fit or make the decision yourself? 👀
Manufacturers recommended size just never felt right so I did what my body felt was right. I had a bike fit many years ago but the changes were minimal from my own set up!
I struggled on bikes that were too large for years - never felt truly comfortable. When I got my Giant TCX the guy in the shop said to go down a size from my normal size. Got a bike fit thrown in, sorted my back out with a foam roller and have never looked back since (except to see what's coming up before a manoeuvre). I've measured my sit bones and my saddle's the right size but probably like most people I would like it a bit comfier!
Mark Beaumont taught me "relaxed arms" in a GCN vid. I like rides that can get up to 12 hours and this made a MEGA difference
While this is quite the Pandora’s Box, tweaking is the way to go. No abstract formula of angle degrees and millimeters can substitute for listening to your own body, while on your own bike.
Super video again Manon and Conor! Best tip (which Manon partly covered), is have your sit bones measured and then ensure that any saddle has at least enough flat at that width to support the sit bone width and doesn't fall off or away so that the sit bones are not supported and you wind up taking it in the pubic arch. OUCH!
As a new rider this was so helpful. I bought a bike 2 years ago and rarely rode it due to discomfort, for the longest time I thought I bought the wrong bike / size. After following the tips, the ride feels a lot better and makes me want to go out and cycle more. One thing I did also was reverse my stem to bring the handle bar higher.
I always had problems with pain in the lower back und upper legs - until i slammed my bars, moved my saddle a little bit higher and way more forward. So a more "aggressive" position gave me more power and comfy at the same time, awesome
Manon has a very very very very nice bike as well. That helps a lot I guess....
I have the same problem. It's probably because when you're in aggressive or aero position, your hand also contributes in distributing your body weight.
Thank you again for the helpful tips. I particularly like how Manon suggested you sit where there's enough saddle to support your weight.
Simple and easy tips 🙌
My moment of realization and what changed to “never having pains again” was GETTING RID OF THE BELLY and stretching. You get more flexible, comfortable, and can ride a heck of a lot faster (of course you have to be in the ballpark of good bike fit)
Maybe most important; working on your core stabiiity! Wish I had done this 20 years ago...
@@dvdp4513 YES that is absolutely true
Congratulations on the engagement Manon!! Ring looks nice and sparkly!! (minute 3:48) ;-)
Good advice on warming up, never even thought about that. I live at the bottom of two hills, although not long, they are both about 14-16%😭, and are within 4 metres of my drive. I think that at the age of 73, I'm going to spend 5 mins on my, permanent, turbo to do a pre ride warm up. Great advice, thanks.👍
Wow that must make starting a ride very hard... ending a ride though! That might be a different story 👀
@@gcn 😂 It does, but I've still got a bit of a climb to get back into the village.😭 The joys of living in a beautiful part of the world.🏴
@@peterthomas8053 Haha.. I feel you!! Straight out of my garage I drop down a 15% for 100m then up a 12% for 100m to start my rides
One thing I learned the hard way was that after some time off due to injury I was uncomfortable when I started back. So I adjusted my saddle and bars. Once I got some time in I was uncomfortable again due to my whacko adjustments. Thankfully I marked everything so I ended up putting it all back, ......
Bike fits can always change after an injury, It's not a bad idea to make the bike a little more relaxed. You might find that you then find it easier getting back on your bike 🙌
Good to know, Thanks. Broke my collar bone last Sunday and was wondering what I might need to change when I'm healed up.@@gcn
Nice bit of bling there Manon 🎉🎉🎉
Is Manon engaged? Happy news! 🎉🎉🎉 3:48
She's being engaged for more than two years. You either close the deal quick or it doesn't happen
While pedaling, I angle 📐 my feet slightly forwards, with the toes angled towards the ground, while having rigid feet, I found that this gives me more power translations in every move, and can pedal for hours to hours without wasting too much energy on my feet. Just did 75 km in 3-3.5 hours.
Could we have a longer video dedicated to warm up & warm down both for outdoor rides & indoor sessions. eg how long at what typical percentage of FTP? are static stretches good? etc. Appreciate this may be an individual thing but some general tips would be useful.
I can't answer all the questions in regards to cycling, but as for stretching: Use dynamic stretches for a warm-up, and static stretches for a cool-down.
Get your saddle lower and longer back on your bike.
Takes the pressure away for your hands.
Helped me alot.
Great to hear that you've been experimenting with different fits 🙌
I am used to cycling mtb. Bought my first road bike a couple of years ago. I almost regretted it. After the first ride I thought, "What kind of sadistic freak would make and sell a torture device like this?" 😂
But after 2 years of experimenting with narrower handlebars and various things, as well as getting used to riding it, the road bike has become my favorite bike.
@@rah4981cool, which road bike ?
Love you much GCN.
“Service to others is the rent you pay for your room here on earth.”
― Muhammad Ali
💯
Nice ring Manon! He’s a keeper!
Thanks. On the bike our muscles work a lot within a reduced range of mobility. This is shortening legs and core joints and fascies. I'm missing the recommendation, that bikers should work on their flexibility and core strength before and after every ride. 😉
Would like to see a flat bar version of this show. I ride a hybrid (road/gravel) bike with flat bars.
감사합니다. Thank you 🙏
I had a bike fit in my 60’s. The bike fitter gave a great piece of advice. As you get older you do lose some flexibility and tolerance to spending extended periods in uncomfortable positions. So adjust your posture on the bike to suit your body rather than attempt to copy those positions used by pro-peloton riders.
Great point! Adjust your bike to work for you, not the other way around 🙌 - How have you set up your bike?
True get a fit for your body not young professional riders... they get paid so they must do it right all the time.🎉
I just knew i had to ride the way it’s described here because it was more comfortable that way than every-other ways i have experimented with despite using the old gear system
Finally a GCN-clip that go away from the Veluminati sillyness that lower handelbars is always better! (Higher isn't always better either)
Absolutely true👍, but between endurance bikes there’s also a lot of difference
I find the hoods angled slightly up gives you a more natural hand position and comfort
but it makes it more uncomfortable to reach for the brakes when you're in the drops
Good bar tape too
Yes, especially if you have a heavy upper body and/or stand on the pedals frequently and/or for long periods
The one that really helped me was getting of the nose but great video👍
The ring 💍Congrats manon 👏
Que buen video justo lo que estaba buscando super buena explicación de todos los consejos ❤🚴🏻♂️
love the saddlebag an tips longlive
I’d wear bike mitts to cushion the hands, particularly the nerves. If you do have the misfortune to come off it can save a lot of skin and suffering.
Don’t be afraid to experiment with different stem lengths and handlebars for variances in rise, flare, etc. They’re not terribly expensive to swap out and could easily be the solution to a more dialed fit.
Can't agree enough.
Often its about “trial and error”.
@@dvdp4513 Yeah, each body is different and each individual prefers a particular "feel". It's a shame many popular stems and handlebars are overpriced since it deters people from personalizing their bikes.
The lads: tutoring from the UK with a Pinarello and a SelleItalia saddle
Me: watching them from Italy and absolutely on 7th heaven at their fantastic perfect cadence (in English too - me foreign learner) 😅❤
Nice video and presentation.
It is easier said than done. If we relax our arms pushing down we’d be sinking towards earth with our chest hitting the stem.
This must've been a long day out filming! Looks like you covered bike bags, gears and now bike comfort! Great content guys.x
Manon's new bike looks spectacular!!!
Alex has the same bike... check it out here 👉 ua-cam.com/video/tvfPJ3xQ7IY/v-deo.html
@@gcn yeah. I was teasing him on his “only one in the UK” moment. 😂
The biggest help for comfort for me was changing the saddle angle. It was level from nose to back but that caused pain, i didnt even know the saddle angle could be changed until a friend told me and your videos showed me how and why.
My bike still needs a bit more adjustments but watching such videos is helping me get it right
Thanks for the tips.
I am battling with lower back pain..
Can you kindly advise...
No worries Karl! Thanks for watching & commenting 🙌 - Lower back pain could be a real selection of things. Saddle hight, seat angle or even bar setup, maybe a bike fit will help sort your issues? We've got some great videos that may be able to help 👉 ua-cam.com/video/c0gw_UG1zZM/v-deo.html
The Wiggle Prime Doyenne saddle is very comfortable and a great price
I got tired of pain and switched to a recumbent. Sit bones were my limiting factor before.
Remember, sometimes your handlebars may actually be too high and too close, giving you neck, shoulder, hand pain, etc. as well as posterior rotating your pelvis. It took me 2 years to figure this out.
Im experiencing this right now. My back, shoulder and hand are in pain. Can you give me a tip how to get rid of this pain. Thanks in advance
@@jamesambrosio2031 Hard to say, but first check your cleats are in good condition and not too far forward. Then check your saddle tilt (most saddles are between 0-3 degrees nose down) and saddle height (both legs should be able to bend normally. Then I would check that your handlebar is not too wide or that it's angle is not off (you can find videos on this by Neill Stanbury). Move your stem up and down and, if possible, try to reduce reach or increase it by switching stems. This is a rough troubleshoot.
I love a windless day!
Any day is a windless day if you sit behind Conor 😂
So Conor likes to get an aero setup to compensate for the Manon-sized handlebar bag?
Can anyone tell me what style Selle Italia saddle that was?
I was just going to ask the same thing!
Anyone….?
great video and really cool advice too. Keep up the good work:)
Glad we could help! It's the perfect video to be sending out to those bike buddies that might be struggling with their fit 🙌
If you warm up on your ride, you ruin your Strava stats. 😊
Another thing worth looking at is handlebar width. Especially with gravel bikes right out of the box, regardless of frame size, the handlebars tend to be 2-4 cm too wide for most people, and the slightly splayed-out stance, while barely noticeable at first, can wreak havoc on your neck, wrists, and shoulders on very long rides.
Wow Conner rides with a massive saddle to bar drop !
You have to remember that Conor is ex pro and still has great fitness 🙌 Finding the right hight for you is most important!
Long arms. Notice that Manon bike has tiny saddle to bar drop in comparison yet her body position is just as aggressive because she has shorter arms.
He has to do it otherwise he is as aero as a house 😂
I had a perfect riding position for 20 years including a pro bike fit. Then got random back of knee pain and now have had to change it! 😬
It does amuse me, that after years of GCN telling us to slam our stems and not have a chimney (thus removing the possibility to raise your bars again after), you are now telling us not to do that 😄
It seems the further removed they become from their racing days the more the info becomes more suitable for the average rider and not the small number of viewers with grand tour potential.
It’s across the board I think.
They’ve done the same with weight loss advice, bike cleaning , wrapping handlebar tape etc
I daresay it’s a case of re inventing the wheel to justify continually re hashing the same subjects.
That’s called getting old 😂
I was just thinking when Conor was talking about handlebar height that there's not that much wrong with having a 'chimney' really, the aerodynamic penalty is negligible, it's just a bit of an aesthetic thing. I'm very resistant to making irreversible changes to things I can't replace cheaply so would think very long & hard before cutting a fork column - especially a carbon one!
Nothing wrong with this. We are learning and re-learning about cycling all the time. Science is about testing, observing, analysing and reporting... and then repeating that process again and again. I'm glad they are revisiting some of these things. I don't see that as a negative.
that "one" perfect position may never be found, for we ourselves change & age every day. the bike won't, so comfort-awareness is lifelong. especially if one watches YT-videos :-) buona fortuna!
Thanks so much for these tips! I am totally new to cycling on a gravel bike and I have so far found a comfortable position BUT: after a few kilometers I get a stabbing pain in the front of my left hip. I tried setting the saddle lower, higher and I tried different angles for the saddle nose. But nothing helped so far. I then have to stand up and straighten myself out, then I'm fine again. Is the handlebar perhaps too low?
Remember that having the bars too high might be just as uncomfortable as having them too low.
Please explain
Important thing is having the handlebars just high enough to be able to maintain a bent elbow or a tuck position. Some riders slam their stem but they can't maintain a "tuck" position very long. You become slower if your arms are always straight. WIth that, I do agree having it too high will cause your shoulders t o shrug and causeback pain.
Modern bikes are much more likely to have super slammed stems and stacks too low. You see it on the road all the time. Like the pinarello the lady is riding. The steerer tube was obviously chopped off, cuz we’ve been taught that’s how it should look. When in reality, except elite athletes almost all of of us would be more comfortable and balances on the bike with higher stacks.
For some people, yes. It doesn't seem to make any sense but when my handlebars were dropped following a bike fit, I actually had less pressure on my hands and my shoulder issues disappeared (I'm no longer shrugging my shoulders to lower my torso).
I was told this is rather common in very flexible people like myself.
@@TurnLeftNow I cannot agree more. The best advice they could have given in this video would be to raise the stem. We are told to go aerodynamic, with slammed stem and all, to be quick and fast like pros, but most of us are really just amateurs with no needs to. Especially when it sacrifices comfort.
Warm up.
Dilation of the pulmonary and arterial systems. Takes about an hour. During this, muscles, tendons and ligaments heat up.
You guys make a great team
Keep up the good work looking forward to more posts from y'all
Ok put the bar bag back on the motorcycle where it belongs and we'll forget all about that little fiasco k? Do keepemcoming won't you
More content on the way soon don't you worry! Turn on your notifications and you'll never miss a video 🔔 You can't take the bar bag off Conor... it's like taking candy from a baby
@@gcn well the question is do you take the bar bag off Conor or do you take Conor off the bar bag...
Haha all in good fun mate.
Could you also do a similar video with a regular/flat bar for a steering wheel. The position on those bikes is different but no one talks about them
Doubt this will be seen but could you tell me what handle bar bag you are using?
All good points, I try to use these as much as possible. My main problem is a pain in the right wrist when braking and changing gears, any tips to grip the hoods correctly to aleviate this?
I think that to avoid wrist pains, your hand should be one the same axis as your forearm. Maybe ask a buddy to check this while you are on a ride.
Not sure but I have seen some say angle the hoods inward a little to allow a more natural wrist position
loved the vid Celtic Dup!
Just remember that your body controles all of the muscles automaticaly, without your conscious effort. How tense or relaxed you are is simply a product of how your bike is set up.
A professional bike fit helped me with my lower back, dropped the seat post by 1cm.
I think back to our brake positions in the 1970s. Wayyyy fAr forward on the bars
Comfort more important than anything!
Bend arms is a good advice.
Van der Poel continues to drive in the same way, according to De Wolf. “I didn't see Mathieu grab his handlebar from underneath twice in the Tour. He always drives with his hands on the steering wheel. Until he reaches fifteenth place and then he sees a small gap. Then it's: go, just left or right and then he's back in fourth position. That is talent, surplus and having good legs.”
On a slightly different note, could you possibly tell me which handebar-bag Connor is using here? It looks like the sort of item I'm looking for.
3:47 thats a nice ring! 💍
Thanks for that information Guys, I'm a new rider on a mountain bike and my hands get numb and I get a tingling sensation after about kilometers and this happens every time I ride, what should I do?
bike specs of the presenters, frame sz cycling kits used etc hope youd make 1
Shout Out for the Great Title Sequences ;)
I’ve come to the realization that I need drop bars and I have to adjust my saddle again. More than likely I’ll go to my LBS and get everything sorted.
On long rides my shoulders have pain from leaning forward. Do you have any helpful suggestions?
Thanks Conor and Manon.......
What confuses me that I can hardly reach the braking levers from the drops and I have used the positioning screw of my Rival to bring the brake lever as close to the handelbar as possible and I have no small hands, more average to slightly large. Position of the hoods is neutral as is the handlebar (Giant handelbar: Reach: 72 mm / Drop: 125 mm) is also quite normal to comfort from the numbers.
Thanks, I needed that!
Anyone know the model of the saddle Manon is using?
Selle Italia Novus Boost Evo TM Superflow. 145 mm wide saddles are common but most people tend to have their thighs rubbing on the wings and move forward on the saddle to avoid it. The Selle Italia SLR and Flite in 130-135 mm tend to suit more people.
I've always wondered about the angle of the saddle. I can't change mine because the screws wouldn't be able to go through
Get a different seat post
No mention of Q factor or have I missed that?
I just blinked by Manon Diamond ring😎💍
Damn my guy is taaaaaalllllll🥶🥶🥶
Hood angle depends on correct stem length to begin with.
I have issues with numb palms on longer rides, 4-5 hrs are long for me, and rarely numb seats, no solution worked so far. My saddle is not too high for sure. Would welcome suggestions 🙏
Try to increase the reach by setting your sattle back. That might help to relief the preasure on your hands
If nothing else is bothering you, try a double layer of handlebar tape. I have gone as far as using thick cotton cloth instead of bike specific handlebar tape. Made a massive improvement. Thicker gloves are an option too, at least during cold months.
What is your seat is at the perfect Hight but you don't have enough steer tube to raise your bars up any? Whats the best option?
just google "bike stem extender" and you will see many different products
Ride safe
Umulan man o umaraw
Tuloy lang ang ating bisyo
#bisyonato
Make sure that your handlebars are in the direction the bike is moving. I had back pain for years and this makes all the difference.
After 4 stems, 4 handlebars and 2 seatposts, I'm hoping I finally have my fit and position figured out 😂
I get some tingling in my hands after some time on the bike. Anybody have any advice for me?
why my saddle nose always goes up after fixing it. It causes discomfort in my lower back.
Warming up is also healthy.
I know riders that are crazy for average numbers of speed... they go crazy from the cold bodies!! They just want high average speed, insanity!
I'm new to graveling which is as close to a road bike I'm gonna get coming from a mtb oh dear I can't break properly no you don't use one finger ,can't turn properly I'm going to far out ,I feel like a nutter loads to learn
Nice bike
How do you prevent your groin from going numb?
Get a more forgiving saddle (gel is good) and for me at least, angling it down just a small amount
What is your handle bar bag? Do you still like it, and would you recommend it?
Being able to properly bend the arms is primarily a function of proper bike fit.
I ride a mtb in roads and i get shoulder pains after 16km
What's my mistake?
Manon my Queen
How about a video on how to find your perfect riding partner? Maybe using Strava data to compare efforts