Creality Hyper PLA filament review, designed for faster printing
Вставка
- Опубліковано 5 лип 2024
- Hyper PLA by Creality is filament designed for faster 3D printing. According to specs, Hyper Series PLA supports up to 600mm/s print speed.
Hyper PLA in Creality Store: shrsl.com/49132
At the time, my fastest Creality 3D printer was the Ender-5 S1, with max speed of 250 mm/s, but with low acceleration compared to CoreXY printers. This has effect on smaller parts, printer cannot reach its max speed. In some tests it was compared to CR-PLA, which was opened 2 years ago, spool from this video: • Creality filament revi...
Results: www.mytechfun.com/video/318
Patreon supporters have access to summary (all results) table, mentioned in the video. / mytechfun
Contents:
0:00 Introduction
1:30 Unboxing
1:53 3D printing
3:59 CR-PLA 3D printing
4:40 Layer adhesion test
5:17 Hook test
5:51 Tensile test
6:05 Shear test
6:19 Twist test
6:41 Impact test
7:10 Bending test
7:45 Temperature test
8:18 Creep test
9:05 Results
12:26 Conclusions
#3dprinting #creality #pla #plafilament - Наука та технологія
Great videos as always!
I came here to see the how the red color looks like and i got a whole science documentation of the filament, thanks. Amazing how much work you put into the video
Hi, can you believe that i came here to see the red color too? lol, because mine red don't look the red that i like !!
Great demo and analyzing.
Your videos are just so interesting!
thanks once again :)
Hi, thanks for a video! Small suggestion: convert your voice track to mono and consider using a pop filter, otherwise it's a bit hard listening to it using headphones.
Fu ezt nagyon várnám a magyar csatornára is!
So far I got 3 "random colour" spools of their Hyper PLA, and all three were red. Interesting that you also got two spools of their red colour, it's probably the one that sells the least.
Interesting, red is not bad color. That pink (CR-PLA) I got two years ago in the review, and I hate pink, thats why I still have that filament.. (I have 3 daughters, I saw too much pink in my life ;-) )
@@MyTechFunSure, yet independantly from the amount of pink in your life, there are four type of colours: appealing, neutral, unappealing and pink ;)
Why do you print the temperature tower at low speed? It will look totally different if you print it at high speed, and the best temperature for high speed printing will be totally different.
Does the creality slicer support the temperature change, or must I use another slicer? Which slicer it so? Thanks! 🙏
Currently no, but you can generate the temperature tower directly from the slicer (if this is what you need)
Does anyone know where to get that oven thermometer?
Looks really cool
Banggood, here is a video about it ua-cam.com/video/a__nu-Mdv7U/v-deo.htmlsi=VZqfBrdHEVOnJs4i
What's that bed material? It looks like a cloth.
Textured pei , but the older version. They have it in golden color now
IMO even if you didn’t have the K1 yet, showing results on a Ender 5 was not very useful. Would’ve been better to see results on fast printing speeds on a Bambu Labs or SV07 or one of the Klipper printers. I don’t think people are going to buy hyper PLA unless they are using it for fast printing.
Magyar csatornára nem jönnek videok?😢
Lenduletesen elindultak, csak valahogy hiányzik a látogatottság és így a motiváció. De nem állok le, csak ritkultak..
I have a vz bot ill test that filament for ya pretty sure i can get more than 250 mms
Hyper PLA is the worst filament i've ever used. Bad layer adhesion and so on, list is infinit... I tried everything, but not even temp tower is clean... I have K1, V3 KE and S1 Plus.. No mather which printer i use, filament just fails... Not one print have been ok.
Skill issue, my k1c prints it perfectly, stock