Best Sawmill on the market - Part 1 -

Поділитися
Вставка
  • Опубліковано 2 лис 2024

КОМЕНТАРІ • 29

  • @konradsusiebakalarczyk267
    @konradsusiebakalarczyk267 2 роки тому +3

    Great instructional maintenance video Russell. SMG should compensate you for your endorsement.
    Good idea marking the guide wheel location first before taking them off. THAT would have saved me lots of time.
    I agree with you about it being the best manual mill on the market. It’s so well designed with ease of use in mind.
    Thanks for the shout out! Keep ‘em coming!

    • @russellbelliveau1694
      @russellbelliveau1694  2 роки тому +1

      Appreciate the feedback!! If you ever need assistance with the mill message me!

  • @mickeckart
    @mickeckart 2 роки тому +1

    Russell, Don't know if I mentioned it, but the Forestry Forum is a website I think you would enjoy.Lot of sawdust,good humor and helpful info.

  • @hitied1
    @hitied1 Рік тому

    Hi Russell, I really value your opinion and experience with this SMG. Pretty sure I am going to order one. Should be just right for me. Thanks,

    • @russellbelliveau1694
      @russellbelliveau1694  Рік тому

      Thanks for watching and the comments, trust me you won’t regret it, they are great sawmills it’s why they’re a bit more expensive but there’s a reason. Good luck if you have any questions about it please reach out.

  • @tractorman4461
    @tractorman4461 2 роки тому +1

    Very interesting set up you got there. This is the first video of yours I've seen but if you've not shown the details of how the backstops for the cant hinge up, I'd appreciate a minute or two on that component. I've not seen the SMG before, and it looks to be a really decent setup.

  • @pedropereira8924
    @pedropereira8924 2 роки тому

    Thanks for the video, very nice, I enjoy it 👍🏼

  • @mickeckart
    @mickeckart 2 роки тому +2

    Great sawmill, I've always like the fit and finish of the SMG mills. Russell, excellent job as usual.
    I use 4 degree blades for knotty spruce. What hook angle are you cutting with ?
    Thanks and keep up the good work.

    • @russellbelliveau1694
      @russellbelliveau1694  2 роки тому

      Thanks a lot for watching and the comment, I have no idea what degree my blades are, I buy them by the box they are Lennox and I have a local guy set and sharpen them.
      Thanks again !

    • @garymelanson8089
      @garymelanson8089 2 роки тому

      @@russellbelliveau1694 i think you may be running 10 degree. same as ours

  • @GrampiesWorkshop
    @GrampiesWorkshop 2 роки тому

    How's she goin'? That's a nice looking mill Russell. It sure can saw logs eh. Nice to get the maintenance done and now your good to go. Thanks for sharing and I'm looking forward to part 2!!!

  • @DIYVariety
    @DIYVariety 2 роки тому

    Great job on the review bud. 7 years is enough to be an expert lol looking to part 2 cheers

    • @russellbelliveau1694
      @russellbelliveau1694  2 роки тому +1

      Thanks so much for watching and the kind comment. I’m working on part 2 stay tuned…..

  • @Railfan6675
    @Railfan6675 11 місяців тому

    Great video!

    • @russellbelliveau1694
      @russellbelliveau1694  11 місяців тому

      Thanks ! Glad you enjoyed it appreciate you taking the time to watch

  • @morgansword
    @morgansword 2 роки тому

    Its a great little mill and seems to be or have what I call user friendly adjustments. I can hope that its in a decent price range for most are too poor to buy a good quality mill. I seen a good stable frame for the logs to rest on as well as the saw carriage to run on. I make these statements because I just build the mills I use for the timber its going to be operating in. You have a wide enough frame for stable milling as well meaning this mill doesn't vibrate or shake when in use. I am going to share this video with some homesteaders that need to learn how to just set the log in its milling position, how to get finished boards without having a large pile of lumber still needing a trim on one side or even getting the most out of a board that is already sawed. I like the fact that you don't pass a side by rolling this log the least amount of turns.,... two sides trimmed and then the actual cuts for dimensions. As we go on an maybe converse on here, I will share some of my own tricks of the trade..... just a few but helpful tricks to help keep down waste. I see by the way your running this mill, that your still in that getting used to how it performs.... I have about forty years on just running a mill of different types, both band and circular mills. The latter is the best for high production but a band mill saves a ton on waste and can perform just as well. I gave a like and did subscribe.... lets hope your list of subscribers will grow substantially

    • @russellbelliveau1694
      @russellbelliveau1694  2 роки тому +1

      Thanks so much Morgan for watching and commenting. It’s a great mill has more than exceeding my expectations and performance. Would like to chat with you about your experience with sawmills. Check out my other sawmill videos and I look forward to your comments and ideas.
      Again welcome and thank you!

  • @gadgethunter5732
    @gadgethunter5732 Рік тому

    I'm guessing you didn't need any factory tech support? I bought a SMG J100 chainsaw mill. I tried getting some questions answered. No luck getting a response. They used to have 1 employee that spoke English that I was able to talk to once , but he quit or so I was told. If you speak French then maybe you will get some support ? Have changed now? Don't know. But I'm not too impressed with the after sale service.

    • @russellbelliveau1694
      @russellbelliveau1694  Рік тому +1

      I pretty much do all the repairs and maintenance myself and have an uncle who is a great mechanic so I wouldn’t need any tech support from them, thankfully if what you say is true. Unfortunately they are based in Quebec so limited English I would guess and that’s unfortunate because the product is top notch. Sorry to hear of your bad experience and thanks for sharing.

  • @WolfgangR75
    @WolfgangR75 2 роки тому

    Hi Russell , it depends where U live
    Here in Germany the best choice for a mill is Woodmizer.
    There is no any other good one....
    If I live in Canada, sure I take a look at SMG, timberking, barker und WM...
    The SMG is available in France, but they don't like Germans....
    I tried calling them, I gave up...so I bought a new Woodmizer LT40.
    If I win in the lottery I go Serra me 90.
    Greetings Wolfgang

    • @russellbelliveau1694
      @russellbelliveau1694  2 роки тому

      Thank you for watching and the comments. Sorry to hear about your experience with SMG. Woodmizer is a great sawmill as well.
      Again thanks for watching!!!!

    • @WolfgangR75
      @WolfgangR75 2 роки тому

      @@russellbelliveau1694 U are welcome. Greetings Wolfgang

  • @comeauveganleather2169
    @comeauveganleather2169 Рік тому

    Hi buster 🐶

  • @randalmoroski1184
    @randalmoroski1184 2 роки тому +1

    Gunna gitter dun!

  • @williamsmyth1855
    @williamsmyth1855 2 роки тому

    Can you get some lofty for me