2B. Filter Wheel Installation
Вставка
- Опубліковано 21 сер 2024
- In this video I'll show you how I installed my ZWO 36mm unmounted filters. Frankly, this was a huge pain! I would recommend getting either 1.25" or 2" filters, which have a filter thread. This will make your life a lot easier!
Here's another video which does a great job showing the installation process:
• Installing 31mm unmoun...
Gear Links:
ASI1600MM-Pro Kit
agenaastro.com...
ZWO Premium LRGB Imaging Filter Set - 36mm Round Unmounted
agenaastro.com...
ZWO Narrowband SHO (S-II, H-a & O-III) Imaging Filter Set - 36mm Round Unmounted
agenaastro.com...
Sorry you had such a hard time with this filter wheel, but your pain is my gain. I'll definitely use the threaded filters.
Thank for the these classes
You can magnetize screwdrivers temporarily by rubbing a strong magnet up and down over the screwdriver. the magnetization works for at least several hours, especially for the tiny little screws. Thanks for the informative video!
Dear Peter, I just wanna say thank you for your great ASI tutorials! It will help me a lot on starting with astrocam imaging starting today after 11 years of DSLR astrophotography!
Love your video. But, fortunately, I do not share your frustration mounting unthreaded filters into the ZWO EFW. Came up with some helpful ideas for others:
Loupes- When dealing with small pieces and parts seeing better allows finer work. Search “head loupe magnifier” Look for 3X magnification or better. Should be able to find inexpensive loupes to aid this project and others.
Lighting- I found the ambient light in the kitchen inadequate to see clearly. Pulling over some additional lumens from an articulating desk lamp angled properly made seeing easier.
Computer Driver (magnetized)- The ZWO driver was perfectly adequate for the EFW case screws, but I found too large for the small filter holder screws. A computer driver set with a right sized, precise, magnetized driver, very helpful. I had a better sized driver for the smaller screws and that made a big difference.
Tweezers (small)- Small flat tipped tweezers, used for stamp collecting or for tweezing eyebrows worked great for manipulating those tiny screws. Pick up each screw by its edge. Insert each of three screws into the holes of the thin black filter retainer first. Orient the retainer properly, holding it by the edge with tweezers, between the screws. Then place the retainer with screws gently upon the filter, being sure the screws are above their holes. Tighten first screw 1/2 way, then the second and third until all are engaged. Then tighten completely to secure.
Filter Orientation- Good point checking to be sure your filters have or do not have a preferential orientation. Be sure to verify this with you filter installation instructions or manufacturer. I installed 31mm unthreaded Astrodon Gen 2 E series LRGB and 3nm Ha, O3, S2 and N2 in my ZWO 8 position EFW. I was surprised when Doug at Farpoint Optical told me there was no right or wrong side to the Astrodon filters I purchased. The filter glass was uniform throughout, and could be mounted either side towards sensor or scope! Check with manufacturer beforehand. Orient filters properly the first time. Save frustration by wasting perfect imaging days and eventually figuring your filters were not properly installed.
Hope this comment prevents filter installation frustration for others.
Hi Peter: I agree installing the filters in the ZWO filter wheel is a pain. I did use a magnetic screwdriver and that made it easier. The easy way to see what side of the ZWO filter is coated is to hold the filter over a white paper then hold a pen or screwdriver just above the surface. If you see only one reflection of the pen or screwdriver then that side faces the camera. Badder filters made it easier by inscribing a small arrow on the edge of the filter making it easy to identify what side faces the telescope. Love your channel!!!
So glad I just bought the 2” threaded filters!
Thank you for that information. I have the same filter wheel from ZWO. But I bought 2" Filters from Baader with a metal ring on them. You are right: it is so much easier to put them in. You just have to spin them by hand to get them in to the slots. And you don't have to worry about the right side.
If you need to work with small screws, use a magnetic screwdriver or get a small magnet and stick it to the screwdriver while you do this work.
If you shine a light at the filter you should see the difference looking at the inside edge *through the glass* of the filter.
I’m learning astrophotography but have been doing microscopy for many years. Darkfield microscopy relates to astrophotography in many ways.
My ZWO 7-position EFW came with a screwdriver that had a magnetized head, so maybe they've gotten enough feedback from past buyers that they made that no-cost but very helpful change. For those who go with the 36mm Astronomik LRGB filters, they are omnidirectional -- you can install them either way. They also have an advantage over the ZWO filters in that they have an opaque black perimeter, so you if feel clumsy doing delicate work wearing latex gloves, you can get away without them with the Astronomik filters if you're careful.
Another quality video. Thank you Peter! I really enjoy how your channel is mindful by answering what most beginners would ask. I'm beginning to get a grasp of the hobby a lot better than a year ago.
Can't wait for your next video and clear skies to you :)
You are bang on Peter the screw in filters only go in 1 way so are super easy to install.But be aware if people are doing that make sure you watch the hight of the filter most are ok but I found the astrodon filters in the zwo wheel rub against the top of the housing causing jamming thats a super pain in the butt.
Sorry you had a real hassel with your install I am sure it will be worth it👍
Nice work yet again. I like that you do this live and we can see a real life version of what happens when you do this for the first time cos its reveals the problems everyone else will face. So a magnetic screwdriver is a desirable option. Might I suggest having a very bright light source light a 100 W lightbulb or equivalent and trying to look at its reflection by reversing the filters. I used optically coated glass a lot and it tends to produce a metallic ghost of a highlight when reflecting using the coated side. The uncoated side should produce a more natural coloured & more pronounced reflection. Anyway, looking forward to see you put this gizzmo into action!
I appreciate you trying it hard way for us 😃 and showing us what to avoid buying.
Hi Peter, thank you for your Tutorials, i have your Deep Sky Course and its help me a lot in the beginning of this hobby. You are awesome!!! After 6 moth in Astro hobby today i already try setup my Filter Wheel with LRGB Ha OIII. SII stil wait from Astodon. So i have some information...
I try Understand how finally corectly setup LRGB filters to FW Facing position, and after two days inspection in internet :D finally i write message to Astrodon (because i by this filters) and i receive Quick Answer from Peter Myers technical Director! "for both Broadband and Narrowband filters it doesn't matter what side is facing towards the camera or the telescope.
The filters are multidirectional."
So i hope maybe for you or guys who watching this video this information helpful. Of course Astrodon pretty expensive peace of glass :) but i was impress this answer.
Thanks Peter for your Job.
Kind advice - use a surgical mask, especially if you're talking while doing this. Our mouths launch droplets. Beside the obvious germ problem, there's the filter contamination issue. :)
I was just fitting my filters to the same wheel and noticed the last two filters were purple and realised they might have a direction! I then cam across your video, sadly there were no instructions on all this with the filters particularly as they aren’t cheap! Thanks for the video.
I appreciate you keeping it real and telling it like it is! Screw in filters it is! 😀 Great video, thanks. 👏👏👏
The 8 position ZWO FW is what I use with 1.25" threaded filters. For correct filter orientation, the motor should be facing the camera, and the screw heads facing the telescope. This is not specifically stated in the Manual, though the diagrams show it. But there are M42 female threads on each side of the FW, so potentially you could be putting it on reversed.
Even though I used the threaded type, I still put in all the tiny screws to stop any light leakage hitting the sensor. But un-threaded would be a pain if you want to change out any filter, especially at night. Wow!
Thanks, Peter.
Awww cmon Peter.. I wanna see the uncut version of you swearing at it and dropping screw everywhere!.. Awesome video mate, cant wait till the next one!
Maybe I'll put that in my new UA-cam 'members-only' area haha
Peter demonstrates which filter makes a better Frizbee, Broadband or Narrowband?!?!.. Or maybe even the entire filter wheel!
Thanks for sharing this. I've been thinking about investing in a filter wheel. Looked at the unmounted filters, but this is the first video I've seen that showed how to mount them into the wheel. So definitely appreciate your candid opinion about the experience. Guess I'll stick with 2" screw ins LOL.
Thank you very much for the detailed explantation ! it was very useful for my own installation of these filters
Great video, and I have exactly the same kit and it helped tremendously. However I didn't find it a big hassle. Magnetic screwdriver made putting the covers on easy - never dropped a single screw. Anti reflective coating, I think I figured which side is which on the LRGB. From the non reflective side if you look through the filter at the edge on the other side you can see where the coating stops - this is consistent and hopefully correct. The O filter was yellower on one side than the other, that according to your video of the ZWO site should be the coated side. Yes all a bit fiddly, and I should have worn a hair net, but I did grab a hat, and I wish I had a blower (blowing using my mouth, bad idea!), however all tolerable. Oh and 36mm filters allow for some very fast lenses like the Samyang 135mm f2, for which I have a project in mind.
I just got this FW and this video was super useful, thank you!
Hi, I am using unthreaded 36mm filters from Baader. They have little arrows carved at the sides so you know which side has the coating. Installing was quite easy.
I received the 7 filter EFW 12/19/2020. I too could not tell the difference between the multilayer side and the anti-reflective side on many filters. I examined the filter side all around using a 10x eye loop looking for a laser scribed indicator as you found on your filters. I found no arrows. I agree with Peter's finding.
Excellent video Peter. I've always wondered why the 36mm filters can't be threaded...it just doesn't make sense!
I wonder if the threaded filters are less expensive The Ones I got were$200a piece and the pack of 4 was $300
Either way, thank you for the video it was very helpful.
Peter, what is your recommendation about the ZWO filters? Do you like it? Is baader better? Thanks for all the amazing videos you are creating to help us beginners here.
FYI, if the male thread on a filter goes the entire length of the filter (there is no shoulder on the male thread) it IS possible to screw in the filter in the wrong orientation. Think about it.
I wish I had seen this before i ordered the 36mm unmounted. I had such a hard time putting the screws in. And the best part, my cat leaped onto my desk into the wheel, the LRGB & HSO filters are mixed up. I could guess LRGB but I can't tell H, S, O filters apart. *cry*
Good video! I could tell you were frustrated. Helps us make a better informed decision on these things. My eq6-r mount arrived today. Still reviewing which scope I want. I’m looking at the Explore Scientific 115 with the FPL-53 glass. ZWO 1600 with the filter wheel is also my preference. Anyone else with suggestions, I’d appreciate it.
This wheel was one of the worst experiences of my life last night with unmounted 36mm chromas 😂
Peter, Like always, you have helped me progress with astrophotography. I do have a question and I hope you can help me.. First, do you regret at all buying a mono camera? I am also looking into buying my first dedicated camera, and I am unsure if I wanted to go with a color or mono camera. Also, why did you got with the 36mm filters? why not go with the 31 mm or the 1.250 size filters? what what is the difference between them ? thank you again.. Rob
Great question! After finally getting a chance to use a color dedicated astro camera, I like my Mono camera even better. The mono produces much better results, and a nicer (more realistic) color balance straight out of the stacking software.
The only downside of a monochrome camera is that you need much more time at night. For example, if I want to photograph Orion, I need to maybe spend 1 hour on Red, 1 hour on Green, and 1 on Blue. But by that point, the Orion Nebula may fall behind some trees and I only have data for Red and Green colors. If I had a color camera, I'm constantly collecting all three channels.
The main reason I went for the 36mm filters was to reduce any chance of vignette. Apparently the 1.25" filters can produce some vignette (in some scenarios). I didn't want to risk it. If I could go back, I would've bought 2" filters instead, since they are easier to install. (just screw em in)
@@PeterZelinka Thank you Peter for taking the time to answer my Question, I really appreciate it. I may end up getting the ASI294 for my Redcat. I'm sure I will be able to produce some great shots, Better than my Sony A6400.
Hi thx for the video. Is diffrent vignetting normal for each filter? I mean a really big diffrence. Lrgb is pretty much the same but sho is very a-semetic.
Great video, I used a magnetic screwdriver,
Is it hard to balance the tracker with the added weight of the filter wheel? Can’t wait to see the results.
Hi Peter! Im following your setup (alrdy bought all the setup u recomended). I was looking to upgrade my dslr camera to ths ASI 1600 mono, the kit 3 of zwo (with the 7 whell slots and the filters), but now with this video im doubting about the filters lol, did you solve the problem with the side position of the filters? Is there a way to finally see what is the right side?
I've only had 3 chances to take photos with this setup so far, due to clouds. With this minimal experience, I haven't noticed any real problems yet (in terms of reflections)
I have a Nikon 200-500mm f/5.6 lens with a 95mm diameter filter size as well as a nikon20mm f/1.8 with a 77mm filter size. I was able to find a Bahtinov mask for the 77mm diameter Nikon 20mm lens. However, I am unable to find one for the 200-500mm lens with the 95mm filter size. Any suggestions?
I've never used a filter wheel. I'm interested in taking better pictures. Is the idea that you take a red, then blue, then green picture and combine them later into a color picture?
Yes. Monochrome sensors are more sensitive in capturing photons compared to a color sensor. A single OSC [one shot color] exposure receives ¼ of the amount of red and blue data, and ½ of the green data compared to a single exposure with a monochrome camera and filter. But it is more time-consuming to take images with a filter wheel so many sacrifice the quality of the image for the time at the scope.
Good evening Peter, for the zwo 2600mm would I be worth this EFW 36mm?
Are these ZWO LRGB filters really good? Which one would you recommend between ZWO and Optolong?
They seem to produce good images, based on my images so far. I don't have any other brand of filters to compare them to yet though.
Why do cameras have filters? I'm lost here
YUP.... 10 for 10 would never ever do unmounted filters again. DAMN pandemic cutting off supplies.